10.9 grade bolt SUPPLIER, STOCKISTS
The Grade 10.9 Stainless Steel Bolt is produced in accordance with specifications that call for low carbon boron steel, medium carbon steel, and medium carbon steel alloy. The Grade 10.9 Bolt Material is heat treated by quenching and tempering these three types of steel. The high tensile strength and good wear resistance of the designated Hex Bolt Class 10.9 are among its key characteristics.
Table of Content
- Grade 10.9 Bolts Price
- Specification of Grade 10.9 Fasteners
- Types of Grade 10.9 Bolts
- Types of Grade 10.9 Studs
- Types of Grade 10.9 Nuts
- Types of Grade 10.9 Washers
- Types of Grade 10.9 Screws
- Grade 10.9 Bolts Size Chart
- Dimensions of Grade 10.9 Hex Bolts
- Dimensions of Grade 10.9 Washers
- Grade 10.9 Hex Nuts Dimensions
- Grade 10.9 Hex Screw Dimensions
- Other Types of Grade 10.9 Fasteners
- Grade 10.9 Fasteners Application
Grade 10.9 Screw, Supplies a full range of Grade 10.9 Bolts, Grade 10.9 Nuts at Factory price in India
The Grade 10.9 Steel Bolts are utilised in automotive applications and for mounting massive, forged pieces because of these characteristics. Class 10.9 Bolts have a yield strength of 940 MPa and Grade 10.9 Nuts have a tensile strength of 1040 MPa. Hsfg Bolts Grade 10.9 are primarily utilised in applications like building, engineering, and structural steelwork in sectors like petrochemicals, defence, railways, and mechanical because of their consistency in threading, dimensional correctness, and corrosion resistance.
carries a complete line of Grade 10.9 Bolt Material, Grade 10.9 Stainless Steel Bolt in mumbai, India
10.9 grade bolt manufacturers
Stud Bolt Grade 10.9
Grade 10.9 Fasteners
Grade 10.9 Threaded Rod
Grade 10.9 Hex Bolts
Grade 10.9 Nuts
The Grade 10.9 Screw is available in a wide range sizes i.e. - standard, coarse and fine sizes. Besides having variability in their sizes, the Class 10.9 Bolt are available in customizable finishes which are done either as required by the buyer or as required by the end use of the product. The Grade 10.9 Steel Bolts can be coated or plated by finishing the surface of the fastener with Black oxide, White Zinc Plating, Yellow Zinc Plating or they could be Hot Dip Galvanised.
|
High Tensile Grade 10.9 Fasteners Price List
|
Price Per Pcs.
|
|---|---|
|
High Tensile Grade 10.9 Socket Head Cap Screw price
|
USD $3.10
|
|
High Tensile Grade 10.9 Hex head bolts price
|
USD $6.05
|
|
High Tensile Grade 10.9 Allen bolts price
|
USD $4.25
|
|
High Tensile Grade 10.9 Machine bolts price
|
USD $5.10
|
|
High Tensile Grade 10.9 Nuts price
|
USD $1.45
|
|
High Tensile Grade 10.9 Screws price
|
USD $3.70
|
|
High Tensile Grade 10.9 Dowel Pins price
|
USD $1.20
|
|
High Tensile Grade 10.9 Washer price
|
USD $1.00
|
|
Grade 10.9 Fasteners Grades
|
Grade 10.9
|
|
Grade 10.9 Fasteners Standard
|
ASTM A324, ASME SA324
|
|
Grade 10.9 Fasteners Size
|
Dia M 20 to 100 mm
Inch 3/4" to 3.1/2" |
|
Grade 10.9 Fasteners finish
|
Zinc plated / Plain / Hot dip galvanised
|
**All measurements in millimeters**
|
DIA |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
M14 |
M16 |
M18 |
M20 |
M22 |
M24 |
M27 |
M30 |
M33 |
M36 |
M39 |
M42 |
M45 |
M48 |
M52 |
|
Pitch |
0.7 |
0.8 |
1 |
1.25 |
1.5 |
1.75 |
2 |
2.5 |
3 |
3.5 |
4 |
4.5 |
5 |
||||||||
|
Grade A upto length |
40 |
50 |
60 |
80 |
100 |
120 |
140 |
150 |
Grade A not applicable to these dia’s |
||||||||||||
|
Head Across Flat (S) Nom = Max Min Grade A Grade B |
7 |
8 |
10 |
13 |
16 |
18 |
21 |
24 |
27 |
30 |
34 |
36 |
41 |
46 |
50 |
55 |
60 |
65 |
70 |
75 |
80 |
|
6.78 |
7.78 |
9.78 |
12.73 |
15.73 |
17.73 |
20.67 |
23.67 |
26.67 |
29.67 |
33.38 |
35.38 |
Grade A not applicable to these dia’s |
|||||||||
|
6.64 |
7.64 |
9.64 |
12.57 |
15.57 |
17.57 |
20.16 |
23.16 |
26.16 |
29.16 |
33 |
35 |
40 |
45 |
49 |
53.8 |
510.9 |
63.1 |
68.1 |
73.1 |
78.1 |
|
|
Head Height (K) Nom Tol + or – Grade A Grade B |
2.8 |
3.5 |
4 |
5.3 |
6.4 |
7.5 |
10.9 |
10 |
11.5 |
12.5 |
14 |
15 |
17 |
18.7 |
21 |
22.5 |
25 |
26 |
28 |
30 |
33 |
|
0.125 |
0.15 |
0.18 |
0.215 |
Grade A not applicable to these dia’s |
|||||||||||||||||
|
0.2 |
0.24 |
0.29 |
0.35 |
0.42 |
0.5 |
||||||||||||||||
|
Across corners e Min Grade A Grade B |
7.66 |
8.79 |
11.05 |
14.38 |
17.77 |
20.03 |
23.36 |
26.75 |
30.14 |
33.53 |
37.72 |
39.98 |
Grade A not applicable to these dia’s |
||||||||
|
7.5 |
8.63 |
10.89 |
14.2 |
17.59 |
19.85 |
22.78 |
26.17 |
29.56 |
32.95 |
37.29 |
39.55 |
45.2 |
50.85 |
55.37 |
60.79 |
66.44 |
71.3 |
76.95 |
82.6 |
88.25 |
|
|
Thread Length (b) For lengths < or = 125mm For lengths > 125mm <= 200mm For lengths > 200mm |
14 |
16 |
18 |
22 |
26 |
30 |
34 |
38 |
42 |
46 |
50 |
54 |
60 |
66 |
Not specified as full thread recommended |
||||||
|
20 |
22 |
24 |
28 |
32 |
36 |
40 |
44 |
48 |
52 |
56 |
60 |
66 |
72 |
78 |
84 |
90 |
96 |
102 |
108 |
116 |
|
|
33 |
35 |
37 |
41 |
45 |
49 |
53 |
57 |
61 |
65 |
69 |
73 |
79 |
85 |
91 |
97 |
103 |
109 |
115 |
121 |
129 |
|
|
Major Dia at thread (min) |
3.838 |
4.826 |
5.794 |
7.76 |
9.732 |
11.701 |
13.682 |
15.682 |
17.623 |
19.623 |
21.623 |
23.577 |
26.577 |
29.522 |
32.522 |
35.465 |
38.465 |
41.437 |
44.437 |
47.399 |
51.399 |
|
Major Dia at thread (max) |
3.978 |
4.976 |
5.974 |
7.972 |
9.968 |
11.966 |
13.962 |
15.962 |
17.958 |
19.958 |
21.958 |
23.952 |
26.952 |
29.947 |
32.947 |
35.94 |
38.94 |
41.937 |
44.937 |
47.929 |
51.929 |
Grade 10.9 Hex Bolts In Bsw/Bsf Threads To Bs 1083-1965
All dimensions in Inches
|
DIA |
1/4 |
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
1 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
2 |
|
BSW Pitch (TPI) |
20 |
18 |
16 |
14 |
12 |
12 |
11 |
10 |
9 |
8 |
7 |
7 |
6 |
5 |
4.5 |
|
|
BSF PITCH (TPI) |
26 |
22 |
20 |
18 |
16 |
16 |
14 |
12 |
11 |
10 |
9 |
9 |
8 |
8 |
7 |
7 |
|
Head Across Flat (S) Min Max |
0.438 |
0.518 |
0.592 |
0.702 |
0.812 |
0.912 |
1.000 |
1.190 |
1.288 |
1.468 |
1.640 |
1.815 |
2.005 |
2.175 |
2.520 |
2.700 |
|
0.445 |
0.525 |
0.600 |
0.710 |
0.820 |
0.920 |
1.010 |
1.200 |
1.300 |
1.480 |
1.670 |
1.860 |
2.050 |
2.220 |
2.580 |
2.760 |
|
|
Head height (K) Min Max |
0.166 |
0.208 |
0.250 |
0.292 |
0.333 |
0.365 |
0.407 |
0.480 |
0.563 |
0.636 |
0.710 |
0.790 |
0.880 |
0.960 |
1.110 |
1.270 |
|
0.176 |
0.218 |
0.260 |
0.302 |
0.343 |
0.375 |
0.417 |
0.500 |
0.583 |
0.666 |
0.750 |
0.830 |
0.920 |
1.000 |
1.170 |
1.330 |
|
|
Across corners e Max |
0.51 |
0.61 |
0.69 |
0.82 |
0.95 |
1.06 |
1.17 |
1.39 |
1.50 |
1.71 |
1.93 |
2.15 |
2.37 |
2.56 |
2.98 |
3.19 |
|
Thread Length b Min |
Twice the Dia (2D) |
|||||||||||||||
|
Major Dia at thread BSW (min) |
0.2427 |
0.3046 |
0.3666 |
0.4285 |
0.4904 |
0.5527 |
0.6147 |
0.7390 |
0.8653 |
0.9897 |
1.1140 |
1.2388 |
1.4879 |
1.7369 |
1.9862 |
|
|
Major Dia at thread BSW (max) |
0.2488 |
0.3112 |
0.3736 |
0.4360 |
0.4985 |
0.5609 |
0.6233 |
0.7482 |
0.8750 |
1.000 |
1.1250 |
1.250 |
1.500 |
1.750 |
2.000 |
|
|
Major Dia at thread BSF (min) |
0.2432 |
0.3051 |
0.3671 |
0.4290 |
0.4910 |
0.5533 |
0.6153 |
0.7394 |
0.8658 |
0.9902 |
1.1148 |
1.2395 |
1.3640 |
1.4888 |
1.7380 |
1.9876 |
|
Major Dia at thread BSF (max) |
0.2489 |
0.3113 |
0.3737 |
0.4361 |
0.4985 |
0.5610 |
0.6234 |
0.7482 |
0.8750 |
1.000 |
1.1250 |
1.250 |
1.375 |
1.500 |
||
All dimensions in Inches
|
DIA |
1/4 |
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
1 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
2 |
|
UNC Pitch (TPI) |
20 |
18 |
16 |
14 |
13 |
12 |
11 |
10 |
9 |
8 |
7 |
7 |
6 |
6 |
5 |
4.5 |
|
UNF Pitch (TPI) |
28 |
24 |
24 |
24 |
20 |
20 |
18 |
16 |
14 |
12 |
NOT RECOMMENDED |
|||||
|
Head Across Flat (S) Min Max |
0.430 |
0.493 |
0.554 |
0.617 |
0.742 |
0.804 |
0.929 |
1.115 |
1.300 |
1.488 |
1.657 |
1.830 |
2.017 |
2.205 |
2.565 |
2.940 |
|
0.437 |
0.500 |
0.562 |
0.625 |
0.750 |
0.812 |
0.937 |
1.125 |
1.312 |
1.500 |
1.687 |
1.875 |
2.062 |
2.250 |
2.625 |
3.000 |
|
|
Head Height (K) Min
Max |
0.153 |
0.201 |
0.233 |
0.281 |
0.313 |
0.361 |
0.393 |
0.463 |
0.543 |
0.597 |
0.678 |
0.773 |
0.838 |
0.934 |
1.074 |
1.203 |
|
0.163 |
0.211 |
0.243 |
0.291 |
0.323 |
0.371 |
0.403 |
0.483 |
0.563 |
0.627 |
0.718 |
0.813 |
0.878 |
0.974 |
1.134 |
1.263 |
|
|
Across corners e (MAX) |
0.505 |
0.577 |
0.650 |
0.722 |
0.866 |
0.938 |
1.083 |
1.300 |
1.515 |
1.732 |
1.948 |
2.165 |
2.382 |
2.598 |
3.031 |
3.464 |
|
Thread Length b (Min) |
2D + 1/4” upto bolt length of 6” and 2D + 1/2” for bolt lengths above 6” |
|||||||||||||||
|
Major Dia at thread ( Class 2A) Min for UNC |
0.2408 |
0.3026 |
0.3643 |
0.4258 |
0.4876 |
0.5495 |
0.6113 |
0.7353 |
0.8592 |
0.9830 |
1.1064 |
1.2314 |
1.3544 |
1.4794 |
1.7268 |
1.9751 |
|
Major Dia at thread (2A) Min for UNF |
0.2425 |
0.3042 |
0.3667 |
0.4281 |
0.4906 |
0.5524 |
0.6149 |
0.7391 |
0.8631 |
0.9868 |
NOT RECOMMENDED |
|||||
|
Major Dia at thread Class 2A Max for UNC |
0.2490 |
0.3113 |
0.3737 |
0.4361 |
0.4985 |
0.5609 |
0.6234 |
0.7482 |
0.8731 |
0.9980 |
1.1228 |
1.2478 |
1.3726 |
1.4976 |
1.7473 |
1.9971 |
ASTM A324 HT Grade 10.9 Allen Cap Bolt
ASTM A324 HT Grade 10.9 Carriage Bolts
A324 HT Grade 10.9 Flange Bolts
ASTM A324 HT Grade 10.9 Countersunk Bolts
SA324 HT Grade 10.9 Hex Bolts
A324 Heavy Hex Bolts
A324 HT Grade 10.9 Anchor Bolts
ASTM A324 HT Grade 10.9 Lag Bolts
ASTM A324 HT Grade 10.9 Hex Head Bolts
ASTM A324 HT Grade 10.9 Square Bolts
ASTM A324 Eye Bolts
ASME SA324 HT Grade 10.9 U Bolts
|
DIA |
M16 |
M20 |
M22 |
M24 |
M27 |
M30 |
M36 |
|
HARDNESS FOR PL. WASHER |
35 TO 45 HRC |
||||||
|
Hardness for Hot Dip Galvd washer |
26 HRC |
||||||
|
Outer Dia (Max) d2 |
34 |
42 |
44 |
50 |
56 |
60 |
72 |
|
Inner Dia (Min) d1 |
18 |
22 |
24 |
26 |
30 |
33 |
39 |
|
Thickness (S) |
3.1 TO 4.6 |
||||||
|
Tolerance for OD Minus(-) |
1.6 |
1.9 |
|||||
|
Tolerance for ID Plus(+) |
0.43 |
0.52 |
0.62 |
||||
All dimensions in mm
|
DIA |
M12 |
M16 |
M20 |
M22 |
M24 |
M27 |
M30 |
M36 |
|
Weight in Kgs for 100 nos |
0.703 |
1.46 |
1.96 |
2.43 |
3.06 |
5.02 |
6.32 |
11.50 |
|
Outer Dia (Max) d2 |
24 |
30 |
37 |
39 |
44 |
50 |
56 |
66 |
|
Inner Dia (Min) d1 |
13 |
17 |
21 |
23 |
25 |
28 |
31 |
37 |
|
Thickness (S) |
3 |
4 |
4 |
4 |
4 |
5 |
5 |
6 |
|
Tolerance for OD Minus(-) |
0.52 |
0.62 |
1 |
1.20 |
||||
|
Tolerance for ID Plus(+) |
0.27 |
0.33 |
0.52 |
0.62 |
||||
|
Tolerance for thickness + or – |
0.30 |
0.60 |
||||||
Grade 10.9 Split Washers
SA324 HT Grade 10.9 Ogee Washers
High Tensile Grade 10.9 Star Washers
A324 Grade 10.9 Flat Washers
Grade 10.9 Belleville Washers
A324 HT Grade 10.9 Dock Washers
Grade 10.9 Countersunk Finishing Washer
Grade 10.9 Fender Washer
A324 HT Grade 10.9 Spring Washers
ASTM A324 HT Grade 10.9 Square Washers
ASME SA324 HT Grade 10.9 Spherical Washers
Grade 10.9 Lock Washers
**All measurements in millimeters**
|
DIA |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
M14 |
M16 |
M18 |
M20 |
M22 |
M24 |
M27 |
M30 |
M33 |
M36 |
M39 |
M42 |
M45 |
M48 |
M52 |
|
Pitch |
0.7 |
0.8 |
1 |
1.25 |
1.5 |
1.75 |
2 |
2 |
2.5 |
2.5 |
2.5 |
3 |
3 |
3.5 |
3.5 |
4 |
4 |
4.5 |
4.5 |
5 |
5 |
|
Across Flat (S) Max Min |
7 |
8 |
10 |
13 |
16 |
18 |
21 |
24 |
27 |
30 |
34 |
36 |
41 |
46 |
50 |
55 |
60 |
65 |
70 |
75 |
80 |
|
6.78 |
7.78 |
9.78 |
12.73 |
15.73 |
17.73 |
20.67 |
23.67 |
26.16 |
29.16 |
33 |
35 |
40 |
45 |
49 |
53.8 |
510.9 |
63.1 |
68.1 |
73.1 |
78.1 |
|
|
Thickness (M) Max Min |
3.2 |
4.7 |
5.2 |
6.8 |
8.4 |
10.8 |
12.8 |
14.8 |
15.8 |
18 |
19.4 |
21.5 |
23.8 |
25.6 |
28.7 |
31 |
33.4 |
34 |
36 |
38 |
42 |
|
2.9 |
4.4 |
4.9 |
6.44 |
8.04 |
10.37 |
12.1 |
14.1 |
15.1 |
16.9 |
18.1 |
20.2 |
22.5 |
24.3 |
27.4 |
29.4 |
31.8 |
32.4 |
34.4 |
36.4 |
40.4 |
|
|
Across corners (E) Min |
7.66 |
8.79 |
11.05 |
14.38 |
17.77 |
20.03 |
23.35 |
26.75 |
29.56 |
32.95 |
37.29 |
39.55 |
45.2 |
50.85 |
55.37 |
60.79 |
66.44 |
71.3 |
76.95 |
82.6 |
88.25 |
|
Minor Dia at thread (min) |
3.242 |
4.134 |
4.917 |
6.647 |
8.376 |
10.106 |
11.835 |
13.835 |
15.294 |
17.294 |
19.294 |
20.752 |
23.752 |
26.211 |
29.211 |
31.67 |
34.67 |
37.129 |
40.129 |
42.587 |
46.587 |
|
Minor Dia at thread (max) |
3.422 |
4.334 |
5.153 |
6.912 |
8.676 |
10.441 |
12.210 |
14.210 |
15.744 |
17.774 |
19.774 |
21.252 |
24.252 |
26.771 |
29.771 |
32.27 |
35.27 |
37.799 |
40.799 |
43.297 |
47.297 |
Grade 10.9 Hex Nuts In Bsw/Bsf Threads To Bs 1083-1965 Threads To Bs 84
All dimensions in inches
|
DIA |
1/4 |
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
1 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
2 |
|
BSW Pitch (TPI) |
20 |
18 |
16 |
14 |
12 |
12 |
11 |
10 |
9 |
8 |
7 |
7 |
– |
6 |
5 |
4.5 |
|
BSF PITCH (TPI) |
26 |
22 |
20 |
18 |
16 |
16 |
14 |
12 |
11 |
10 |
9 |
9 |
8 |
8 |
7 |
7 |
|
WIDTH Across Flat (S) Min Max |
0.438 |
0.518 |
0.592 |
0.702 |
0.812 |
0.912 |
1.000 |
1.190 |
1.288 |
1.468 |
1.640 |
1.815 |
2.005 |
2.175 |
2.520 |
2.700 |
|
0.445 |
0.525 |
0.600 |
0.710 |
0.820 |
0.920 |
1.010 |
1.200 |
1.300 |
1.480 |
1.670 |
1.860 |
2.050 |
2.220 |
2.580 |
2.760 |
|
|
Thickness (M) Min Max |
0.190 |
0.240 |
0.302 |
0.365 |
0.427 |
0.490 |
0.552 |
0.677 |
0.740 |
0.865 |
0.990 |
1.105 |
1.230 |
1.355 |
1.605 |
1.730 |
|
0.200 |
0.250 |
0.312 |
0.375 |
0.437 |
0.500 |
0.562 |
0.687 |
0.750 |
0.875 |
1.000 |
1.125 |
1.250 |
1.375 |
1.625 |
1.750 |
|
|
Across corners (Max inches) |
0.51 |
0.61 |
0.69 |
0.82 |
0.95 |
1.06 |
1.17 |
1.39 |
1.50 |
1.71 |
1.93 |
2.15 |
2.37 |
2.56 |
2.98 |
3.19 |
|
Minor Dia at thread BSW (min) |
0.1860 |
0.2413 |
0.2950 |
0.3461 |
0.3932 |
0.4557 |
0.5086 |
0.6220 |
0.7328 |
0.8400 |
0.9420 |
1.0670 |
– |
1.2866 |
1.4938 |
1.7154 |
|
Minor Dia at thread BSW (max) |
0.2030 |
0.2594 |
0.3145 |
0.3674 |
0.4169 |
0.4794 |
0.5338 |
0.6490 |
0.7620 |
0.8720 |
0.9776 |
1.1026 |
– |
1.3269 |
1.5408 |
1.7668 |
|
Minor Dia at thread BSF (min) |
0.2008 |
0.2543 |
0.3110 |
0.3663 |
0.4200 |
0.4825 |
0.5336 |
0.6432 |
0.7586 |
0.8720 |
0.9828 |
1.1078 |
1.2150 |
1.3400 |
1.5670 |
1.8170 |
|
Minor Dia at thread BSF (max) |
0.2125 |
0.2684 |
0.3280 |
0.3844 |
0.4395 |
0.5020 |
0.5549 |
0.6669 |
0.7838 |
0.8990 |
1.0120 |
1.1370 |
1.2470 |
1.3720 |
1.6026 |
1.8526 |
All dimensions in inches
|
DIA |
1/4 |
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
1 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
2 |
|
UNC Pitch (TPI) |
20 |
18 |
16 |
14 |
13 |
12 |
11 |
10 |
9 |
8 |
7 |
7 |
6 |
6 |
5 |
4.5 |
|
UNF Pitch (TPI) |
28 |
24 |
24 |
24 |
20 |
20 |
18 |
16 |
14 |
12 |
NOT RECOMMENDED |
|||||
|
Width Across Flat (S) Min Max |
0.430 |
0.493 |
0.554 |
0.617 |
0.742 |
0.804 |
0.929 |
1.115 |
1.300 |
1.488 |
1.657 |
1.830 |
2.017 |
2.205 |
2.565 |
2.940 |
|
0.437 |
0.500 |
0.562 |
0.625 |
0.750 |
0.812 |
0.937 |
1.125 |
1.312 |
1.500 |
1.687 |
1.875 |
2.062 |
2.250 |
2.625 |
3.000 |
|
|
Thickness (M) Min Max |
0.214 |
0.261 |
0.323 |
0.370 |
0.432 |
0.479 |
0.542 |
0.631 |
0.740 |
0.844 |
0.949 |
1.037 |
1.147 |
1.251 |
1.470 |
1.684 |
|
0.224 |
0.271 |
0.333 |
0.380 |
0.442 |
0.489 |
0.552 |
0.651 |
0.760 |
0.874 |
0.989 |
1.087 |
1.197 |
1.311 |
1.530 |
1.754 |
|
|
Across corners (E) Max |
0.505 |
0.577 |
0.650 |
0.722 |
0.866 |
0.938 |
1.083 |
1.300 |
1.515 |
1.732 |
1.948 |
2.165 |
2.382 |
2.598 |
3.031 |
3.464 |
|
Minor Dia at thread (min) UNC (2B) |
0.1960 |
0.2520 |
0.3070 |
0.3600 |
0.4170 |
0.4720 |
0.5270 |
0.6420 |
0.7550 |
0.8650 |
0.9700 |
1.0950 |
1.1950 |
1.3200 |
1.5340 |
1.7590 |
|
Minor Dia at thread (max) UNC (2B) |
0.2070 |
0.2650 |
0.3210 |
0.3760 |
0.4340 |
0.4900 |
0.5460 |
0.6630 |
0.7780 |
0.8900 |
0.9980 |
1.1230 |
1.2250 |
1.3500 |
1.5680 |
1.7950 |
|
Minor Dia at thread (min) UNF (2B) |
0.2110 |
0.2670 |
0.3300 |
0.3830 |
0.4460 |
0.5020 |
0.5650 |
0.6820 |
0.7980 |
0.9100 |
NOT RECOMMENDED |
|||||
|
Minor Dia at thread (max) UNF (2B) |
0.2200 |
0.2770 |
0.3400 |
0.3950 |
0.4570 |
0.5150 |
0.5780 |
0.6960 |
0.8140 |
0.9280 |
||||||
All dimensions in mm
|
DIA |
M16 |
M20 |
M22 |
M24 |
M27 |
M30 |
M36 |
|
Pitch |
2 |
2.5 |
2.5 |
3 |
3 |
3.5 |
4 |
|
Head Across Flat (B) Min |
26.16 |
33 |
35 |
40 |
45 |
49 |
510.9 |
|
Head Across Flat (B) Max |
27 |
34 |
36 |
41 |
46 |
50 |
60 |
|
Height (H) Min Max |
16.4 |
19.4 |
22.3 |
22.9 |
26.3 |
29.1 |
35 |
|
17.1 |
20.7 |
23.6 |
24.2 |
27.6 |
30.7 |
36.6 |
|
|
Across corners C min |
29.56 |
37.29 |
39.55 |
45.20 |
50.85 |
55.37 |
66.44 |
|
Minor Dia at thread (min) |
14.235 |
17.694 |
19.694 |
21.202 |
24.252 |
26.761 |
32.270 |
|
Minor Dia at thread (max) |
14.610 |
18.144 |
20.144 |
21.702 |
24.752 |
27.321 |
32.870 |
ASTM A324 HT Grade 10.9 Lock Nut
SA324 HT Grade 10.9 Heavy Hex Nuts
Grade 10.9 Nylon Insert Nuts
Grade 10.9 Self Locking Nuts
ASTM A324 HT Grade 10.9 T Nuts
A324 HT Grade 10.9 Acorn Nuts
Grade 10.9 Nyloc Nuts
Grade 10.9 Serrated Flange Nuts
ASTM A324 HT Grade 10.9 Hex Head Nuts
A324 HT Grade 10.9 Square Nuts
ASME SA324 HT Grade 10.9 Eye Nuts
A324 HT Grade 10.9 Hex Nuts
ASTM A324 HT Grade 10.9 Panel Nuts
SA324 HT Grade 10.9 Wing Nuts
ASME SA324 HT Grade 10.9 Dome Nuts
A324 HT Grade 10.9 Coupling Nuts
|
DIA |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
M14 |
M16 |
M18 |
M20 |
M22 |
M24 |
M27 |
M30 |
M33 |
M36 |
M39 |
M42 |
M45 |
M48 |
M52 |
|
Pitch |
0.7 |
0.8 |
1 |
1.25 |
1.5 |
1.75 |
2 |
2 |
2.5 |
2.5 |
2.5 |
3 |
3 |
3.5 |
3.5 |
4 |
4 |
4.5 |
4.5 |
5 |
5 |
|
Grade A upto length |
40 |
50 |
60 |
80 |
100 |
120 |
140 |
150 |
Grade A not applicable to these dia’s |
||||||||||||
|
Head Across Flat (S) Max Min(Grade A) Min (Grade B) |
7 |
8 |
10 |
13 |
16 |
18 |
21 |
24 |
27 |
30 |
34 |
36 |
41 |
46 |
50 |
55 |
60 |
65 |
70 |
75 |
80 |
|
6.78 |
7.78 |
9.78 |
12.73 |
15.73 |
17.73 |
20.67 |
23.67 |
26.67 |
29.67 |
33.38 |
35.38 |
Grade A not applicable to these dia’s |
|||||||||
|
6.64 |
7.64 |
9.64 |
12.57 |
15.57 |
17.57 |
20.16 |
23.16 |
26.16 |
29.16 |
33 |
35 |
40 |
45 |
49 |
53.8 |
510.9 |
63.1 |
68.1 |
73.1 |
78.1 |
|
|
Head Thickness (K) Tol + or – Grade A
Grade B |
2.8 |
3.5 |
4 |
5.3 |
6.4 |
7.5 |
10.9 |
10 |
11.5 |
12.5 |
14 |
15 |
17 |
18.7 |
21 |
22.5 |
25 |
26 |
28 |
30 |
33 |
|
0.125 |
0.15 |
0.18 |
0.215 |
Grade A not applicable to these dia’s |
|||||||||||||||||
|
0.2 |
0.24 |
0.29 |
0.35 |
0.42 |
0.5 |
||||||||||||||||
|
Across corners e Min Grade A
Min Grade B |
7.66 |
8.79 |
11.05 |
14.38 |
17.77 |
20.03 |
23.36 |
26.75 |
30.14 |
33.53 |
37.72 |
39.98 |
Grade A not applicable to these dia’s |
||||||||
|
7.5 |
8.63 |
10.89 |
14.2 |
17.59 |
19.85 |
22.78 |
26.17 |
29.56 |
32.95 |
37.29 |
39.55 |
45.2 |
50.85 |
55.37 |
60.79 |
66.44 |
71.3 |
76.95 |
82.6 |
88.25 |
|
|
Major Dia at thread (min) |
3.838 |
4.826 |
5.794 |
7.76 |
9.732 |
11.701 |
13.682 |
15.682 |
17.623 |
19.623 |
21.623 |
23.577 |
26.577 |
29.522 |
32.522 |
35.465 |
38.465 |
41.437 |
44.437 |
47.399 |
51.399 |
|
Major Dia at thread (max) |
3.978 |
4.976 |
5.974 |
7.972 |
9.968 |
11.966 |
13.962 |
15.962 |
17.958 |
19.958 |
21.958 |
23.952 |
26.952 |
29.947 |
32.947 |
35.94 |
38.94 |
41.937 |
44.937 |
47.929 |
51.929 |
Grade A324 HT Grade 10.9 Wing Screw
High Tensile Grade 10.9 Socket Head Cap Screw
High Tensile Grade 10.9 Grade A324 Self Tapping Screw
Grade 10.9 Roofing Screw
Grade 10.9 Concrete Screw
A324 HT Grade 10.9 Eye Screw
A324 HT Grade 10.9 Deck Screw
A324 HT Grade 10.9 Thumb Screw
A324 HT Grade 10.9 Coach Screw
Grade 10.9 Wood Screw
High Tensile Grade 10.9 Lag Screw
ASTM A324 HT Grade 10.9 Countersuck Screw
A324 Grade 10.9 Set Screw
High Tensile Grade 10.9 Self Drilling Screw
India’s Largest Manufacturer of Class 10.9 Bolt, Hex Bolt Class 10.9, Hsfg Bolts Grade 10.9 in mumbai, India
|
ASTM A324 Grade 10.9 Bolts
|
Grade 10.9 Automotive Bolts
|
|
Grade 10.9 Coach Bolts Manufacturer
|
Grade 10.9 Button Head Bolts Stokist
|
|
ASTM A324 Grade 10.9 Toggle Bolts
|
Grade 10.9 High Strength Bolts
|
|
Grade 10.9 Fasteners & Bolts
|
Grade 10.9 Deck Bolts
|
|
Grade 10.9 Bolt
|
Grade 10.9 Hurricane Bolts
|
|
Grade 10.9 Allen Head Bolts Wholesaler
|
Grade 10.9 Header Bolts Distributor
|
|
Grade 10.9 Barrel Nuts
|
Grade 10.9 Rivet Nuts
|
|
Grade 10.9 Weld Nuts
|
Grade 10.9 Wheel Nuts
|
|
Grade 10.9 Flat Head Bolts
|
Grade 10.9 Hurricane Bolts
|
|
Grade 10.9 Gutter Bolts
|
Grade 10.9 Hook Bolts Manufacturer
|
|
Grade 10.9 Cap Head Bolts
|
Grade 10.9 Exhaust Bolts Supplier
|
ASTM A324 HT Grade 10.9 Double Ended Studs
A324 HT Grade 10.9 Stud Bolts
ASTM A324 HT Grade 10.9 Threaded Rod
SA324 HT Grade 10.9 Tie Bars
ASME SA324 HT Grade 10.9 Tie Rods
- HT Studs uses in Petrochemicals
- Grade 10.9 Nuts uses in Specialty Chemicals
- Grade 10.9 Bolts And Nuts uses in Pharmaceuticals
- HT U Bolts uses in Spiral Welded tube for burner pipes and flues
- Grade 10.9 Fasteners uses in Gas Processing
- HT Fasteners uses in Power Generation
- Grade 10.9 Threaded Rod uses in Sea Water Equipment
- HT Bolts uses in Off-Shore Oil Drilling Companies
- HT Anchor Bolts uses in Heat Exchangers
- HT Fasteners uses in Pharmaceutical Equipment
- Grade 10.9 Steel Fasteners uses in Aircraft Exhaust fastenersonline
View Class 10.9 Nuts Dimensions & weight, high tensile bolts grade 10.9 specifications.
Buy Grade 10.9 Steel Bolts,Grade 10.9 Fasteners from High Tensile Grade 10.9 Flange Bolts Exporter at factory price in India
