High Tensile Fasteners SUPPLIER, STOCKISTS
Bolts are externally threaded fasteners that are made to be driven through the assembled pieces. By torqueing a nut, these fasteners can be tightened or released. These bolts are made by High Tensile Stud Manufacturer from tempered alloy steel or high strength carbon steel.
Table of Content
- High Tensile Fasteners Specification
- Price of High Tensile Bolts
- High Tensile Studs Types
- High Tensile Bolts Types
- High Tensile Nuts Types
- High Tensile Washers Types
- High Tensile Screws Types
- High Tensile Bolts Dimensions
- High Tensile Washers Dimensions
- Dimensions of High Strength Nut
- Dimensions of High Tensile Hex Screw
- Size Chart of High Tensile Bolts
- Application of High Tensile Fasteners
- High Tensile Fasteners Other Types
High Tensile Nut Bolt Manufacturers In India, Supplies a full range of High Tensile Nuts at Factory price in India
These High Strength Fasteners offer a strength that is around 25% to 50% more than normal bolts. The ultimate tensile strength, or UTS, of a metal or alloy is also referred to as tensile strength. The maximum amount of stress that a bolt can withstand before failing in its function is referred to as its tensile strength. Industrial fasteners may not only fail, but the additional stress may also cause the fastener to break, if it is applied to them beyond their tensile strength.
Each fastener's grade designates the amount of stress that it can withstand. Using force per unit area, the fastener or bolt's grade is determined. For instance, a high tensile bolt of 8.8 grade can withstand a stress of 45 to 49.9 metric tonnes per square centimetre (6.45 cm2).
High Tensile Bolts Manufacturers In India, carries a complete line of High Tensile Bolts, High Tensile Stud in mumbai, India
High Tensile Bolt Suppliers
High Tensile Threaded Rod
High Tensile Hex Bolt
High Tensile Nut Bolt
High Tensile Stud Manufacturer
High Tensile Fasteners Manufacturers
These High Tensile Bolts and Fixings are significantly more popular and are utilised in many applications since they have a higher tensile strength than a conventional bolt. A lot of the high tensile bolts and fasteners on the market are made of a dark-colored alloy. The High Tensile Bolts Manufacturers In India process of making these powerful bolts results in this dark colour, which is a distinguishing feature. However, High Tensile Nut Bolt Manufacturers In India frequently look beyond the black colour and contemplate providing the providers with bolts that have undergone zinc plating processing in order to provide their customers with high quality industrial grade fasteners.
A strong form of plating used on High Stress Bolts is zinc by itself. Because it tends to improve the qualities of these High Tensile Bolts, it is quite well-liked. Numerous advantages come with this kind of zinc plating, including superior corrosion resistance. These high tensile strength bolts offer protection against white oxidation spots, which may appear over time if the bolts are exposed to moisture, in addition to corrosion resistance.
Nominal Size Range (mm) |
|---|
Class 8.8: Medium carbon steel, quenched and tempered |
Class 10.9: Alloy steel, quenched and tempered |
Class 12.9: Alloy steel, quenched and tempered |
High Tensile Fasteners Grades |
Grade 10.9, Grade 8.8, DIN 933 Grade 12.9 |
High Tensile Fasteners Standard |
IS 1364 / IS 1363 & DIN EN ISO 4014 & 4017 DIN 931 / 933 |
High Tensile Fasteners Size |
Dia M 20 to 100 mm Inch 3/4" to 3.1/2" |
High Tensile Fasteners finish |
Zinc plated / Plain / Hot dip galvanised |
High Tensile Fasteners Price List |
Price Per Pcs. |
|---|---|
High Tensile Machine bolts price |
USD $5.10 |
High Tensile Hex head bolts price |
USD $6.05 |
High Tensile Socket Head Cap Screw price |
USD $3.10 |
High Tensile Screws price |
USD $3.70 |
High Tensile Dowel Pins price |
USD $1.20 |
High Tensile Allen bolts price |
USD $4.25 |
High Tensile Washer price |
USD $1.00 |
High Tensile Nuts price |
USD $1.45 |
F568 Stud Bolts
ASTM F568 High Tensile Double Ended Studs
SF568 High Tensile Tie Bars
ASTM F568 Threaded Rod
ASME SF568 HT Tie Rods
ASTM F568 HT Carriage Bolts
ASTM F568 High Tensile Allen Cap Bolt
ASTM F568 HT Countersunk Bolts
F568 High Tensile Flange Bolts
F568 Heavy Hex Bolts
SF568 HT Hex Bolts
ASTM F568 High Tensile Lag Bolts
F568 HT Anchor Bolts
ASTM F568 High Tensile Square Bolts
ASTM F568 High Tensile Hex Head Bolts
ASME SF568 High Tensile U Bolts
ASTM F568 Eye Bolts
SF568 HT Heavy Hex Nuts
F568 High Tensile Lock Nut
High Tensile Self Locking Nuts
High Tensile Nylon Insert Nuts
F568 High Tensile Acorn Nuts
High Tensile T Nuts
High Tensile Serrated Flange Nuts
High Tensile Nyloc Nuts
F568 High Tensile Square Nuts
ASTM F568 Hex Head Nuts
F568 HT Hex Nuts
ASME SF568 High Tensile Eye Nuts
SF568 HT Wing Nuts
F568 High Tensile Panel Nuts
F568 HT Coupling Nuts
ASTM F568 Dome Nuts
SF568 High Tensile Ogee Washers
High Tensile Split Washers
F568 High Tensile Flat Washers
HT Star Washers
F568 High Tensile Dock Washers
High Tensile Belleville Washers
High Tensile Fender Washer
High Tensile Countersunk Finishing Washer
ASTM F568 HT Square Washers
F568 High Tensile Spring Washers
High Tensile Lock Washers
ASME SF568 High Tensile Spherical Washers
High Tensile Socket Head Cap Screw
Grade F568 HT Wing Screw
High Tensile Roofing Screw
High Tensile Grade F568 Self Tapping Screw
F568 HT Eye Screw
High Tensile Concrete Screw
F568 High Tensile Thumb Screw
F568 HT Deck Screw
High Tensile Wood Screw
F568 High Tensile Coach Screw
ASTM F568 HT Countersuck Screw
High Tensile Lag Screw
HT Self Drilling Screw
F568 High Tensile Set Screw
India’s Largest High Tensile Stud Manufacturer in mumbai, India
**All measurements in millimeters**
DIA |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
M14 |
M16 |
M18 |
M20 |
M22 |
M24 |
M27 |
M30 |
M33 |
M36 |
M39 |
M42 |
M45 |
M48 |
M52 |
Pitch |
0.7 |
0.8 |
1 |
1.25 |
1.5 |
1.75 |
2 |
2.5 |
3 |
3.5 |
4 |
4.5 |
5 |
||||||||
Grade A upto length |
40 |
50 |
60 |
80 |
100 |
120 |
140 |
150 |
Grade A not applicable to these dia’s |
||||||||||||
Head Across Flat (S) Nom = Max Min Grade A Grade B |
7 |
8 |
10 |
13 |
16 |
18 |
21 |
24 |
27 |
30 |
34 |
36 |
41 |
46 |
50 |
55 |
60 |
65 |
70 |
75 |
80 |
6.78 |
7.78 |
9.78 |
12.73 |
15.73 |
17.73 |
20.67 |
23.67 |
26.67 |
29.67 |
33.38 |
35.38 |
Grade A not applicable to these dia’s |
|||||||||
6.64 |
7.64 |
9.64 |
12.57 |
15.57 |
17.57 |
20.16 |
23.16 |
26.16 |
29.16 |
33 |
35 |
40 |
45 |
49 |
53.8 |
58.8 |
63.1 |
68.1 |
73.1 |
78.1 |
|
Head Height (K) Nom Tol + or – Grade A Grade B |
2.8 |
3.5 |
4 |
5.3 |
6.4 |
7.5 |
8.8 |
10 |
11.5 |
12.5 |
14 |
15 |
17 |
18.7 |
21 |
22.5 |
25 |
26 |
28 |
30 |
33 |
0.125 |
0.15 |
0.18 |
0.215 |
Grade A not applicable to these dia’s |
|||||||||||||||||
0.2 |
0.24 |
0.29 |
0.35 |
0.42 |
0.5 |
||||||||||||||||
Across corners e Min Grade A Grade B |
7.66 |
8.79 |
11.05 |
14.38 |
17.77 |
20.03 |
23.36 |
26.75 |
30.14 |
33.53 |
37.72 |
39.98 |
Grade A not applicable to these dia’s |
||||||||
7.5 |
8.63 |
10.89 |
14.2 |
17.59 |
19.85 |
22.78 |
26.17 |
29.56 |
32.95 |
37.29 |
39.55 |
45.2 |
50.85 |
55.37 |
60.79 |
66.44 |
71.3 |
76.95 |
82.6 |
88.25 |
|
Thread Length (b) For lengths < or = 125mm For lengths > 125mm <= 200mm For lengths > 200mm |
14 |
16 |
18 |
22 |
26 |
30 |
34 |
38 |
42 |
46 |
50 |
54 |
60 |
66 |
Not specified as full thread recommended |
||||||
20 |
22 |
24 |
28 |
32 |
36 |
40 |
44 |
48 |
52 |
56 |
60 |
66 |
72 |
78 |
84 |
90 |
96 |
102 |
108 |
116 |
|
33 |
35 |
37 |
41 |
45 |
49 |
53 |
57 |
61 |
65 |
69 |
73 |
79 |
85 |
91 |
97 |
103 |
109 |
115 |
121 |
129 |
|
Major Dia at thread (min) |
3.838 |
4.826 |
5.794 |
7.76 |
9.732 |
11.701 |
13.682 |
15.682 |
17.623 |
19.623 |
21.623 |
23.577 |
26.577 |
29.522 |
32.522 |
35.465 |
38.465 |
41.437 |
44.437 |
47.399 |
51.399 |
Major Dia at thread (max) |
3.978 |
4.976 |
5.974 |
7.972 |
9.968 |
11.966 |
13.962 |
15.962 |
17.958 |
19.958 |
21.958 |
23.952 |
26.952 |
29.947 |
32.947 |
35.94 |
38.94 |
41.937 |
44.937 |
47.929 |
51.929 |
High Tensile Hex Bolts In Bsw/Bsf Threads To Bs 1083-1965
All dimensions in Inches
DIA |
1/4 |
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
1 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
2 |
BSW Pitch (TPI) |
20 |
18 |
16 |
14 |
12 |
12 |
11 |
10 |
9 |
8 |
7 |
7 |
6 |
5 |
4.5 |
|
BSF PITCH (TPI) |
26 |
22 |
20 |
18 |
16 |
16 |
14 |
12 |
11 |
10 |
9 |
9 |
8 |
8 |
7 |
7 |
Head Across Flat (S) Min Max |
0.438 |
0.518 |
0.592 |
0.702 |
0.812 |
0.912 |
1.000 |
1.190 |
1.288 |
1.468 |
1.640 |
1.815 |
2.005 |
2.175 |
2.520 |
2.700 |
0.445 |
0.525 |
0.600 |
0.710 |
0.820 |
0.920 |
1.010 |
1.200 |
1.300 |
1.480 |
1.670 |
1.860 |
2.050 |
2.220 |
2.580 |
2.760 |
|
Head height (K) Min Max |
0.166 |
0.208 |
0.250 |
0.292 |
0.333 |
0.365 |
0.407 |
0.480 |
0.563 |
0.636 |
0.710 |
0.790 |
0.880 |
0.960 |
1.110 |
1.270 |
0.176 |
0.218 |
0.260 |
0.302 |
0.343 |
0.375 |
0.417 |
0.500 |
0.583 |
0.666 |
0.750 |
0.830 |
0.920 |
1.000 |
1.170 |
1.330 |
|
Across corners e Max |
0.51 |
0.61 |
0.69 |
0.82 |
0.95 |
1.06 |
1.17 |
1.39 |
1.50 |
1.71 |
1.93 |
2.15 |
2.37 |
2.56 |
2.98 |
3.19 |
Thread Length b Min |
Twice the Dia (2D) |
|||||||||||||||
Major Dia at thread BSW (min) |
0.2427 |
0.3046 |
0.3666 |
0.4285 |
0.4904 |
0.5527 |
0.6147 |
0.7390 |
0.8653 |
0.9897 |
1.1140 |
1.2388 |
1.4879 |
1.7369 |
1.9862 |
|
Major Dia at thread BSW (max) |
0.2488 |
0.3112 |
0.3736 |
0.4360 |
0.4985 |
0.5609 |
0.6233 |
0.7482 |
0.8750 |
1.000 |
1.1250 |
1.250 |
1.500 |
1.750 |
2.000 |
|
Major Dia at thread BSF (min) |
0.2432 |
0.3051 |
0.3671 |
0.4290 |
0.4910 |
0.5533 |
0.6153 |
0.7394 |
0.8658 |
0.9902 |
1.1148 |
1.2395 |
1.3640 |
1.4888 |
1.7380 |
1.9876 |
Major Dia at thread BSF (max) |
0.2489 |
0.3113 |
0.3737 |
0.4361 |
0.4985 |
0.5610 |
0.6234 |
0.7482 |
0.8750 |
1.000 |
1.1250 |
1.250 |
1.375 |
1.500 |
||
All dimensions in Inches
DIA |
1/4 |
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
1 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
2 |
UNC Pitch (TPI) |
20 |
18 |
16 |
14 |
13 |
12 |
11 |
10 |
9 |
8 |
7 |
7 |
6 |
6 |
5 |
4.5 |
UNF Pitch (TPI) |
28 |
24 |
24 |
24 |
20 |
20 |
18 |
16 |
14 |
12 |
NOT RECOMMENDED |
|||||
Head Across Flat (S) Min Max |
0.430 |
0.493 |
0.554 |
0.617 |
0.742 |
0.804 |
0.929 |
1.115 |
1.300 |
1.488 |
1.657 |
1.830 |
2.017 |
2.205 |
2.565 |
2.940 |
0.437 |
0.500 |
0.562 |
0.625 |
0.750 |
0.812 |
0.937 |
1.125 |
1.312 |
1.500 |
1.687 |
1.875 |
2.062 |
2.250 |
2.625 |
3.000 |
|
Head Height (K) Min
Max |
0.153 |
0.201 |
0.233 |
0.281 |
0.313 |
0.361 |
0.393 |
0.463 |
0.543 |
0.597 |
0.678 |
0.773 |
0.838 |
0.934 |
1.074 |
1.203 |
0.163 |
0.211 |
0.243 |
0.291 |
0.323 |
0.371 |
0.403 |
0.483 |
0.563 |
0.627 |
0.718 |
0.813 |
0.878 |
0.974 |
1.134 |
1.263 |
|
Across corners e (MAX) |
0.505 |
0.577 |
0.650 |
0.722 |
0.866 |
0.938 |
1.083 |
1.300 |
1.515 |
1.732 |
1.948 |
2.165 |
2.382 |
2.598 |
3.031 |
3.464 |
Thread Length b (Min) |
2D + 1/4” upto bolt length of 6” and 2D + 1/2” for bolt lengths above 6” |
|||||||||||||||
Major Dia at thread ( Class 2A) Min for UNC |
0.2408 |
0.3026 |
0.3643 |
0.4258 |
0.4876 |
0.5495 |
0.6113 |
0.7353 |
0.8592 |
0.9830 |
1.1064 |
1.2314 |
1.3544 |
1.4794 |
1.7268 |
1.9751 |
Major Dia at thread (2A) Min for UNF |
0.2425 |
0.3042 |
0.3667 |
0.4281 |
0.4906 |
0.5524 |
0.6149 |
0.7391 |
0.8631 |
0.9868 |
NOT RECOMMENDED |
|||||
Major Dia at thread Class 2A Max for UNC |
0.2490 |
0.3113 |
0.3737 |
0.4361 |
0.4985 |
0.5609 |
0.6234 |
0.7482 |
0.8731 |
0.9980 |
1.1228 |
1.2478 |
1.3726 |
1.4976 |
1.7473 |
1.9971 |
DIA |
M16 |
M20 |
M22 |
M24 |
M27 |
M30 |
M36 |
HARDNESS FOR PL. WASHER |
35 TO 45 HRC |
||||||
Hardness for Hot Dip Galvd washer |
26 HRC |
||||||
Outer Dia (Max) d2 |
34 |
42 |
44 |
50 |
56 |
60 |
72 |
Inner Dia (Min) d1 |
18 |
22 |
24 |
26 |
30 |
33 |
39 |
Thickness (S) |
3.1 TO 4.6 |
||||||
Tolerance for OD Minus(-) |
1.6 |
1.9 |
|||||
Tolerance for ID Plus(+) |
0.43 |
0.52 |
0.62 |
||||
All dimensions in mm
DIA |
M12 |
M16 |
M20 |
M22 |
M24 |
M27 |
M30 |
M36 |
Weight in Kgs for 100 nos |
0.703 |
1.46 |
1.96 |
2.43 |
3.06 |
5.02 |
6.32 |
11.50 |
Outer Dia (Max) d2 |
24 |
30 |
37 |
39 |
44 |
50 |
56 |
66 |
Inner Dia (Min) d1 |
13 |
17 |
21 |
23 |
25 |
28 |
31 |
37 |
Thickness (S) |
3 |
4 |
4 |
4 |
4 |
5 |
5 |
6 |
Tolerance for OD Minus(-) |
0.52 |
0.62 |
1 |
1.20 |
||||
Tolerance for ID Plus(+) |
0.27 |
0.33 |
0.52 |
0.62 |
||||
Tolerance for thickness + or – |
0.30 |
0.60 |
||||||
**All measurements in millimeters**
DIA |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
M14 |
M16 |
M18 |
M20 |
M22 |
M24 |
M27 |
M30 |
M33 |
M36 |
M39 |
M42 |
M45 |
M48 |
M52 |
Pitch |
0.7 |
0.8 |
1 |
1.25 |
1.5 |
1.75 |
2 |
2 |
2.5 |
2.5 |
2.5 |
3 |
3 |
3.5 |
3.5 |
4 |
4 |
4.5 |
4.5 |
5 |
5 |
Across Flat (S) Max Min |
7 |
8 |
10 |
13 |
16 |
18 |
21 |
24 |
27 |
30 |
34 |
36 |
41 |
46 |
50 |
55 |
60 |
65 |
70 |
75 |
80 |
6.78 |
7.78 |
9.78 |
12.73 |
15.73 |
17.73 |
20.67 |
23.67 |
26.16 |
29.16 |
33 |
35 |
40 |
45 |
49 |
53.8 |
58.8 |
63.1 |
68.1 |
73.1 |
78.1 |
|
Thickness (M) Max Min |
3.2 |
4.7 |
5.2 |
6.8 |
8.4 |
10.8 |
12.8 |
14.8 |
15.8 |
18 |
19.4 |
21.5 |
23.8 |
25.6 |
28.7 |
31 |
33.4 |
34 |
36 |
38 |
42 |
2.9 |
4.4 |
4.9 |
6.44 |
8.04 |
10.37 |
12.1 |
14.1 |
15.1 |
16.9 |
18.1 |
20.2 |
22.5 |
24.3 |
27.4 |
29.4 |
31.8 |
32.4 |
34.4 |
36.4 |
40.4 |
|
Across corners (E) Min |
7.66 |
8.79 |
11.05 |
14.38 |
17.77 |
20.03 |
23.35 |
26.75 |
29.56 |
32.95 |
37.29 |
39.55 |
45.2 |
50.85 |
55.37 |
60.79 |
66.44 |
71.3 |
76.95 |
82.6 |
88.25 |
Minor Dia at thread (min) |
3.242 |
4.134 |
4.917 |
6.647 |
8.376 |
10.106 |
11.835 |
13.835 |
15.294 |
17.294 |
19.294 |
20.752 |
23.752 |
26.211 |
29.211 |
31.67 |
34.67 |
37.129 |
40.129 |
42.587 |
46.587 |
Minor Dia at thread (max) |
3.422 |
4.334 |
5.153 |
6.912 |
8.676 |
10.441 |
12.210 |
14.210 |
15.744 |
17.774 |
19.774 |
21.252 |
24.252 |
26.771 |
29.771 |
32.27 |
35.27 |
37.799 |
40.799 |
43.297 |
47.297 |
High Tensile Hex Nuts In Bsw/Bsf Threads To Bs 1083-1965 Threads To Bs 84
All dimensions in inches
DIA |
1/4 |
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
1 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
2 |
BSW Pitch (TPI) |
20 |
18 |
16 |
14 |
12 |
12 |
11 |
10 |
9 |
8 |
7 |
7 |
– |
6 |
5 |
4.5 |
BSF PITCH (TPI) |
26 |
22 |
20 |
18 |
16 |
16 |
14 |
12 |
11 |
10 |
9 |
9 |
8 |
8 |
7 |
7 |
WIDTH Across Flat (S) Min Max |
0.438 |
0.518 |
0.592 |
0.702 |
0.812 |
0.912 |
1.000 |
1.190 |
1.288 |
1.468 |
1.640 |
1.815 |
2.005 |
2.175 |
2.520 |
2.700 |
0.445 |
0.525 |
0.600 |
0.710 |
0.820 |
0.920 |
1.010 |
1.200 |
1.300 |
1.480 |
1.670 |
1.860 |
2.050 |
2.220 |
2.580 |
2.760 |
|
Thickness (M) Min Max |
0.190 |
0.240 |
0.302 |
0.365 |
0.427 |
0.490 |
0.552 |
0.677 |
0.740 |
0.865 |
0.990 |
1.105 |
1.230 |
1.355 |
1.605 |
1.730 |
0.200 |
0.250 |
0.312 |
0.375 |
0.437 |
0.500 |
0.562 |
0.687 |
0.750 |
0.875 |
1.000 |
1.125 |
1.250 |
1.375 |
1.625 |
1.750 |
|
Across corners (Max inches) |
0.51 |
0.61 |
0.69 |
0.82 |
0.95 |
1.06 |
1.17 |
1.39 |
1.50 |
1.71 |
1.93 |
2.15 |
2.37 |
2.56 |
2.98 |
3.19 |
Minor Dia at thread BSW (min) |
0.1860 |
0.2413 |
0.2950 |
0.3461 |
0.3932 |
0.4557 |
0.5086 |
0.6220 |
0.7328 |
0.8400 |
0.9420 |
1.0670 |
– |
1.2866 |
1.4938 |
1.7154 |
Minor Dia at thread BSW (max) |
0.2030 |
0.2594 |
0.3145 |
0.3674 |
0.4169 |
0.4794 |
0.5338 |
0.6490 |
0.7620 |
0.8720 |
0.9776 |
1.1026 |
– |
1.3269 |
1.5408 |
1.7668 |
Minor Dia at thread BSF (min) |
0.2008 |
0.2543 |
0.3110 |
0.3663 |
0.4200 |
0.4825 |
0.5336 |
0.6432 |
0.7586 |
0.8720 |
0.9828 |
1.1078 |
1.2150 |
1.3400 |
1.5670 |
1.8170 |
Minor Dia at thread BSF (max) |
0.2125 |
0.2684 |
0.3280 |
0.3844 |
0.4395 |
0.5020 |
0.5549 |
0.6669 |
0.7838 |
0.8990 |
1.0120 |
1.1370 |
1.2470 |
1.3720 |
1.6026 |
1.8526 |
All dimensions in inches
DIA |
1/4 |
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
1 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
2 |
UNC Pitch (TPI) |
20 |
18 |
16 |
14 |
13 |
12 |
11 |
10 |
9 |
8 |
7 |
7 |
6 |
6 |
5 |
4.5 |
UNF Pitch (TPI) |
28 |
24 |
24 |
24 |
20 |
20 |
18 |
16 |
14 |
12 |
NOT RECOMMENDED |
|||||
Width Across Flat (S) Min Max |
0.430 |
0.493 |
0.554 |
0.617 |
0.742 |
0.804 |
0.929 |
1.115 |
1.300 |
1.488 |
1.657 |
1.830 |
2.017 |
2.205 |
2.565 |
2.940 |
0.437 |
0.500 |
0.562 |
0.625 |
0.750 |
0.812 |
0.937 |
1.125 |
1.312 |
1.500 |
1.687 |
1.875 |
2.062 |
2.250 |
2.625 |
3.000 |
|
Thickness (M) Min Max |
0.214 |
0.261 |
0.323 |
0.370 |
0.432 |
0.479 |
0.542 |
0.631 |
0.740 |
0.844 |
0.949 |
1.037 |
1.147 |
1.251 |
1.470 |
1.684 |
0.224 |
0.271 |
0.333 |
0.380 |
0.442 |
0.489 |
0.552 |
0.651 |
0.760 |
0.874 |
0.989 |
1.087 |
1.197 |
1.311 |
1.530 |
1.754 |
|
Across corners (E) Max |
0.505 |
0.577 |
0.650 |
0.722 |
0.866 |
0.938 |
1.083 |
1.300 |
1.515 |
1.732 |
1.948 |
2.165 |
2.382 |
2.598 |
3.031 |
3.464 |
Minor Dia at thread (min) UNC (2B) |
0.1960 |
0.2520 |
0.3070 |
0.3600 |
0.4170 |
0.4720 |
0.5270 |
0.6420 |
0.7550 |
0.8650 |
0.9700 |
1.0950 |
1.1950 |
1.3200 |
1.5340 |
1.7590 |
Minor Dia at thread (max) UNC (2B) |
0.2070 |
0.2650 |
0.3210 |
0.3760 |
0.4340 |
0.4900 |
0.5460 |
0.6630 |
0.7780 |
0.8900 |
0.9980 |
1.1230 |
1.2250 |
1.3500 |
1.5680 |
1.7950 |
Minor Dia at thread (min) UNF (2B) |
0.2110 |
0.2670 |
0.3300 |
0.3830 |
0.4460 |
0.5020 |
0.5650 |
0.6820 |
0.7980 |
0.9100 |
NOT RECOMMENDED |
|||||
Minor Dia at thread (max) UNF (2B) |
0.2200 |
0.2770 |
0.3400 |
0.3950 |
0.4570 |
0.5150 |
0.5780 |
0.6960 |
0.8140 |
0.9280 |
||||||
All dimensions in mm
DIA |
M16 |
M20 |
M22 |
M24 |
M27 |
M30 |
M36 |
Pitch |
2 |
2.5 |
2.5 |
3 |
3 |
3.5 |
4 |
Head Across Flat (B) Min |
26.16 |
33 |
35 |
40 |
45 |
49 |
58.8 |
Head Across Flat (B) Max |
27 |
34 |
36 |
41 |
46 |
50 |
60 |
Height (H) Min Max |
16.4 |
19.4 |
22.3 |
22.9 |
26.3 |
29.1 |
35 |
17.1 |
20.7 |
23.6 |
24.2 |
27.6 |
30.7 |
36.6 |
|
Across corners C min |
29.56 |
37.29 |
39.55 |
45.20 |
50.85 |
55.37 |
66.44 |
Minor Dia at thread (min) |
14.235 |
17.694 |
19.694 |
21.202 |
24.252 |
26.761 |
32.270 |
Minor Dia at thread (max) |
14.610 |
18.144 |
20.144 |
21.702 |
24.752 |
27.321 |
32.870 |
DIA |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
M14 |
M16 |
M18 |
M20 |
M22 |
M24 |
M27 |
M30 |
M33 |
M36 |
M39 |
M42 |
M45 |
M48 |
M52 |
Pitch |
0.7 |
0.8 |
1 |
1.25 |
1.5 |
1.75 |
2 |
2 |
2.5 |
2.5 |
2.5 |
3 |
3 |
3.5 |
3.5 |
4 |
4 |
4.5 |
4.5 |
5 |
5 |
Grade A upto length |
40 |
50 |
60 |
80 |
100 |
120 |
140 |
150 |
Grade A not applicable to these dia’s |
||||||||||||
Head Across Flat (S) Max Min(Grade A) Min (Grade B) |
7 |
8 |
10 |
13 |
16 |
18 |
21 |
24 |
27 |
30 |
34 |
36 |
41 |
46 |
50 |
55 |
60 |
65 |
70 |
75 |
80 |
6.78 |
7.78 |
9.78 |
12.73 |
15.73 |
17.73 |
20.67 |
23.67 |
26.67 |
29.67 |
33.38 |
35.38 |
Grade A not applicable to these dia’s |
|||||||||
6.64 |
7.64 |
9.64 |
12.57 |
15.57 |
17.57 |
20.16 |
23.16 |
26.16 |
29.16 |
33 |
35 |
40 |
45 |
49 |
53.8 |
58.8 |
63.1 |
68.1 |
73.1 |
78.1 |
|
Head Thickness (K) Tol + or – Grade A
Grade B |
2.8 |
3.5 |
4 |
5.3 |
6.4 |
7.5 |
8.8 |
10 |
11.5 |
12.5 |
14 |
15 |
17 |
18.7 |
21 |
22.5 |
25 |
26 |
28 |
30 |
33 |
0.125 |
0.15 |
0.18 |
0.215 |
Grade A not applicable to these dia’s |
|||||||||||||||||
0.2 |
0.24 |
0.29 |
0.35 |
0.42 |
0.5 |
||||||||||||||||
Across corners e Min Grade A
Min Grade B |
7.66 |
8.79 |
11.05 |
14.38 |
17.77 |
20.03 |
23.36 |
26.75 |
30.14 |
33.53 |
37.72 |
39.98 |
Grade A not applicable to these dia’s |
||||||||
7.5 |
8.63 |
10.89 |
14.2 |
17.59 |
19.85 |
22.78 |
26.17 |
29.56 |
32.95 |
37.29 |
39.55 |
45.2 |
50.85 |
55.37 |
60.79 |
66.44 |
71.3 |
76.95 |
82.6 |
88.25 |
|
Major Dia at thread (min) |
3.838 |
4.826 |
5.794 |
7.76 |
9.732 |
11.701 |
13.682 |
15.682 |
17.623 |
19.623 |
21.623 |
23.577 |
26.577 |
29.522 |
32.522 |
35.465 |
38.465 |
41.437 |
44.437 |
47.399 |
51.399 |
Major Dia at thread (max) |
3.978 |
4.976 |
5.974 |
7.972 |
9.968 |
11.966 |
13.962 |
15.962 |
17.958 |
19.958 |
21.958 |
23.952 |
26.952 |
29.947 |
32.947 |
35.94 |
38.94 |
41.937 |
44.937 |
47.929 |
51.929 |
DIN 933 Grade 12.9 Bolts |
High Tensile Automotive Bolts |
High Tensile Coach Bolts Manufacturer |
Button Head Bolts Stokist |
DIN 933 Grade 12.9 Toggle Bolts |
High Strength Bolts |
High Tensile Fasteners & Bolts |
High Tensile Deck Bolts |
Allen Head Bolts Wholesaler |
High Tensile Header Bolts Distributor |
High Tensile Barrel Nuts |
High Tensile Rivet Nuts |
High Tensile Weld Nuts |
High Tensile Wheel Nuts |
High Tensile Flat Head Bolts |
High Tensile Hurricane Bolts |
High Tensile Gutter Bolts |
Hook Bolts Manufacturer |
High Tensile Cap Head Bolts |
High Tensile Exhaust Bolts Supplier |
- High Tensile Bolts And Nuts uses in Pharmaceuticals
- HT U Bolts uses in Spiral Welded tube for burner pipes and flues
- HT Anchor Bolts uses in Heat Exchangers
- High Tensile Bolts uses in Off-Shore Oil Drilling Companies
- High Tensile Nuts uses in Specialty Chemicals
- High Tensile Steel Fasteners uses in Aircraft Exhaust fastenersonline
- HT Fasteners uses in Power Generation
- High Tensile Bolts Fasteners uses in Gas Processing
- High Tensile Fasteners uses in Pharmaceutical Equipment
- High Tensile Studs uses in Petrochemicals
- High Tensile Threaded Rod uses in Sea Water Equipment
View High Tensile Allen Bolt Dimensions & weight, HT Hex Bolt specifications.
Buy High Tensile Socket Head Cap Screws, HT Studs at factory price in India
