Din 2635 Pn40 Flange Supplier

Wire Neck On their perimeter, flanges are welded into the system. A radiography test can be carried out to check the integrity of the butt welded area since the welding neck flange din 2635 has been welded at its neck. Both the pipe and the flange will match as a result of the welding that takes place around the bores' perimeter. As a result, there is less turbulence and erosion inside the pipeline than there once was. Therefore, the din 2635 flange can be employed in many important applications.

Table of Content

din 2635 pn40 flange dimensions pdf, Din 2635 Pn40 Flanges Manufacturers in Mumbai

Processes including heat treatments, forging, and machining are employed as part of the production technique to create din 2635 flange specifications. Materials like Hastelloy, Inconel, Monel, carbon steel, alloy steel, titanium, alloy 20, duplex steel, super duplex steel, Incoloy, and various grades of stainless steel like 304, 304L, 316, 316L, etc. can be used to create welding neck flange din 2635. The din 2635 flange's mechanical and physical characteristics will be determined by the type of material used to make it. For example, din 2635 flanges made of Super Duplex Stainless Steel will have a low rate of thermal expansion, a high tensile strength, superior resistance to chloride pitting, and crevice corrosion. Due to its capacity to endure high temperatures, the flanges constructed from this alloy can also be utilised in applications where the temperature can reach up to 600° F. Additionally, the alloy has a great resistance to intergranular corrosion brought on by carbides.

As a result, the din 2635 flange made of Super Duplex Stainless Steel grades can be used in a wide range of industries, including desalination equipment, marine applications, flue gas scrubbing equipment, pulp and paper mill equipment, oil and gas industry equipment, offshore oil production/technology, and pressure vessels, piping, and heat exchangers for chemical processes.

Din 2635 Flange Specification, Refer DIN 2635 PN40 Flange Dimensions

The size din 2635 pn 40 flange dimensions range from DN10 to DN5000, or 12 inch (15 NB) to 48 inches (1200 NB). The DIN 2635 PN40 Flange Standards contains specifications for API7S-15, API7S-43, API605, ANSI/ASME B16.5, B16.47 Series A & B, BS4504, B16.48, BS 10, EN-1092, DIN, ASME Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ISO70051, JISB2220, MSS S44,

The most popular flange c din 2635 varieties on the market are forged, plate, screwed, and threaded. Flat Face (FF), Lap-Joint Face (LJF), Ring Type Joint (RTJ), Raised Face (RF), Large Male-Female (LMF), Small Male-Female (SMF), Small Tongue, Groove, and Large Tongue & Groove are the different Flange Face or Connection Types for the din 2635 pn16 flange dimensions.

The flanges din 2635 pn40's surface treatment include painting it with either Oil Black Paint or Anti-rust Paint. Other choices for surface treatment for din 2635 flanges include electroplating with zinc or yellow transparent, which results in a thin coating on the surface of these flanges. Flanges din 2635 pn40, on the other hand, receive a thicker zinc coating if they are treated using either cold or hot dip galvanization. The flanges' resistance against corrosion is increased by the zinc coating on their surface.

Click on the din 2635 flange dimensions pdf provided here to learn more about the DIN 2635 and to assist you in selecting the best flanges for usage in any applications.

 

DIN 2635 Flange Dimensions
DIN 2635 Flange Dimensions
Germany standard flange DIN 2635 welding neck flanges; nominal pressure 10
Brides à souder à collerette DIN 2635: pression nominale 10
Pipe
Flange
Neck
Raised face
Screws
Weight
(7,85 Kg/dm3)
Rated
d1
D
b
k
h1
d3
s
r
h2
d4
f
Holes
Thread
d2
Kg
Diameter
ISO Series
DIN Series
15
-
20
95
14
65
35
30
2
4
6
45
2
4
M 12
14
0,648
21,3
-
32
20
-
25
105
16
75
38
38
2,3
4
6
58
2
4
M 12
14
0,952
26,9
-
40
25
-
30
115
16
85
38
42
2,6
4
6
68
2
4
M 12
14
1,14
33,7
-
45
32
-
38
140
16
100
40
52
2,6
6
6
78
2
4
M 16
18
1,69
42,4
-
56
40
-
44,5
150
16
110
42
60
2,6
6
7
88
3
4
M 16
18
1,86
48,3
-
64
50
-
57
165
18
125
45
72
2,9
6
8
102
3
4
M 16
18
2,53
60,3
-
75
65
76,1
-
185
18
145
45
90
2,9
6
10
122
3
4
M 16
18
3,06
80
88,9
-
200
20
160
50
105
3,2
8
10
138
3
8
M 16
18
3,7
100
-
108
220
20
180
52
125
3,6
8
12
158
3
8
M 16
18
4,62
114,3
-
131
125
-
133
250
22
210
55
150
4
8
12
188
3
8
M 16
18
6,3
139,7
-
156
150
-
159
285
22
240
55
175
4,5
10
12
212
3
8
M 20
22
7,75
168,3
-
184
200
219,1
-
340
24
295
62
235
5,9
10
16
268
3
8
M 20
22
11,3
250
-
267
395
26
350
68
285
6,3
12
16
320
3
12
M 20
22
14,7
273
-
292
300
323,9
-
445
26
400
68
344
7,1
12
16
370
4
12
M 20
22
17,4
350
355,6
-
505
26
460
68
385
7,1
12
16
430
4
16
M 20
22
23,6
-
368
21,6
400
406,4
-
565
26
515
72
440
7,1
12
16
482
4
16
M 24
26
28,6
-
419
26,2
(450)
457
-
615
28
565
72
488
7,1
12
16
532
4
20
M 24
26
31,5
500
508
-
670
28
620
75
542
7,1
12
16
585
4
20
M 24
26
38,1
600
610
-
780
28
725
80
642
7,1
12
18
685
5
20
M 27
30
44,6
700
711
-
895
30
840
80
745
8
12
18
800
5
24
M 27
30
62,4
800
813
-
1015
32
950
90
850
8
12
18
905
5
24
M 30
33
84,1
900
914
-
1115
34
1050
95
950
10
12
20
1005
5
28
M 30
33
98,5
1000
1016
-
1230
34
1160
95
1052
10
16
20
1110
5
28
M 33
36
115

 

Refer DIN 2635 Pn10 Weld Neck Flange Dimensions and Sizes, DIN 2635 PN40 Welding Neck Flanges Stockist in Mumbai

DIN 2635 Flange Specifications
Specifications DIN 2635 Flanges
ASME B16.5 DIN 2635 Flange size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
DIN 2635 Flanges Standards B16.47 Series A & B, ANSI/ASME B16.5, BS4504, B16.48, EN-1092, BS 10, DIN, ANSI Flanges, BS Flanges, ASME Flanges, EN Flanges, DIN Flanges, GOST Flanges.
DIN 2635 Flange Standard DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
DIN 2635 Flange Standard JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
DIN 2635 Flange Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
DIN 2635 Flange Standard EN 6Bar 10Bar 16Bar 25Bar 40Bar
Main Types Threaded / Forged / Plate /Screwed
Flange supporting material Ring Joint, Gasket, Flange Bolts
DIN 2635 Pipe Flanges Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Most common types of DIN 2635 Flanges
  • Slip-On Ring Flange (SORF), DIN 2635
  • Weld Neck Ring Flange (WNRF), DIN 2635
  • Threaded Ring Flange, DIN 2635
  • Socket Weld Ring Flange (SWRF), DIN 2635
  • Blind Ring Flange (BLRF), DIN 2635
  • Ring Type Joint Flange (RTJF), DIN 2635
  • Lap Joint Ring Flange (LJRF), DIN 2635
Production technique
  • Forged, Heat treated and machined
Connect Type/ Flange Face Type Ring Type Joint (RTJ), Raised Face (RF),Large Male-Female (LMF), Flat Face (FF),Small Male-Female (SMF), Lap-Joint Face (LJF), Large Tongue & Groove, Small Tongue, Groove
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

DIN 2635 Threaded Flange, Socketweld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange
Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment Bending machine, Press machine, electric bevelling machine, Pushing Machine, Sand-blasting machine etc
Origin Indian / West Europe / Japan / USA / Korean
Specialized manufacturer of
  • DIN 2566 pn16
  • Rtj Flange
  • PN16 Flange
  • DIN 2566 pn10
  • DIN 2566 en 1092 1
  • DIN 2635 Blind Flanges
  • DIN 2635 Large Diameter Flange
  • DIN 2635 Table Flanges
  • DIN 2635 Sorf Flange
  • DIN 2635 Socketweld Flanges
  • DIN 2635 Threaded Flanges
  • DIN 2635 Weld Neck Flanges
  • DIN 2635 Slip-On Flanges
  • DIN 2635 Loose Flanges
  • DIN 2635 AS 4087 Water Flanges
  • DIN 2635 Lap Joint Flanges
  • DIN 2635 Plate Flanges
  • DIN 2635 Orifice Flanges
DIN 2635 Flanges Standard

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • AS 2129: Table D; Table E; Table H
  • B.S: BS4504 , BS3293, BS1560, BS10
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • German (DIN)
  • American standard (ANSI)
  • Any other specilised flanges
  • British standard (BS)
  • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
  • DIN:  DIN 2527, DIN 2566, DIN 2635, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2635, DIN 2635, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
Key markets and industries for DIN 2635 Flanges
  • Nuclear power (mostly seamless).
  • Heavy oil refineries.
  • Bitumen upgraders.
  • Petrochemicals and acids.
Export to Oman, Ireland, Brazil, Ukraine, Canada, Egypt, Spain, Korea, Indonesia, Iran, USA, Thailand, India, Peru, Dubai, Singapore, Saudi Arabia etc
DIN 2635 Flanges Application
  • To Connect Pipe & Tubes in Chemical, Petroleum, Power, Gas, Construction,Shipbuilding, Metallurgy etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

 

Check DIN 2635 PN40 Flange Dimension, View Din 2635 Pn 16 Flange Dimensions
DIN 2635 Weld Neck Flange PN 40 manufacturer in Mumbai, India

 

flange