Stainless Steel Raised Face Flange Supplier, Stockists

The Raised Face flange 150 lbs. is one of the most widely utilised types of flange in process plant applications. The ansi b16. 5 Raised Face flange is quite simple to recognise. Companies that make raised face flanges Because the gasket's surface is elevated above the face of the bolting circle, India refers to it as a raised face. With the duplex stainless steel Raised Face flange, this face type enables the buyer to employ a variety of gasket designs, including flat ring sheet types and metallic composites like spiral wound and double jacketed types.

Table of Content

Check the dimensions of the raised face flanges made of A105 carbon steel and Pn16.

A Pn16 Raised Face Flange is designed to boost the joint's ability to contain pressure by concentrating greater pressure on a smaller gasket area. According to the ASME B16.5 definition, the diameter and height of the raised face flange made of carbon steel are determined by pressure class. Rating of the alloy steel under pressure The height of the raised face is determined by the raised face flange. The gasket surface area of the Raised Face Flange Class 600 is located above the flange's bolting line, making it simple to identify.

A wide variety of flange gaskets can typically be used with a Raised Face Flange Awwa C207 Class D. These gaskets can come in flat, semi-metallic, and metallic varieties. For instance, both jacketed and spiral wound gaskets, either in ring face or full face, are included in the gaskets for the Raised Face Flange A105. The main goal of the Raised Face Flange Jis 10k design is to increase the strength of the seal by concentrating the pressure of the two mating flanges up on a small surface.

The flange pressure rating determines the height of the Raised Face Flange Jis 5k. The Raised Face Flange Asme B16.5 is intended for pressure ANSI classes 150 and 300, and its pressure rating is for those pressures. Its height is approximately 1.6 mm, or 1/16 inch. The Api 6A Raised Face Flange height typically reaches up to 6.4 mm, or 1/4 inch, for ANSI classes that fall between class 400 and class 2500.

View API 6A RF Flange Price List In India, Copper Raised Face Flange Supplier In Mumbai, Raised Face Flange Awwa C207 Class D Weigh Chart

Raised Face Flanges of Carbon Steel
Raised Face Flanges of Carbon Steel
Stainless Steel of Raised Face Flanges
Stainless Steel of Raised Face Flanges
Raised Face Flanges of Alloy Steel
Raised Face Flanges of Alloy Steel

Learn more about Jis 10k Pressure Rating for Raised Face Flanges and the weight of 8 Aluminum Raised Face Flanges, as well as Indian suppliers of Super Duplex, Titanium, and Nickel Alloy Raised Face Flanges.

The 125 to 250 micron Ra finish is the one that is most frequently used for Raised Face Flange Din En 1092-1. (3 to 6 micron Ra). According to ASME B16.5, manufacturers' standard flange face finish is the raised face. This means that if a different flange face is needed, the buyer must mention this when placing an order with the manufacturer of stainless steel of raised face flanges. Alternatively, if a flat face or ring joint is desired. The most common type of flange used in petrochemical applications is the raised face flange asme B16.5 class 300.

 

Price List of Raised Face Flanges
Raised Face Flanges type
Raised Face Flanges Price in India
Raised Face Flanges Price in USD
Raised Face Flanges Price in UAE Dirham
Stainless Steel of Raised Face Flanges
INR 2876.42 / Kg
USD $ 39.92 /Kg
AED 147.98 UAE Dirham
Raised Face Flanges of Carbon steel
INR 2140.05 / Kg
USD $ 28.82 /Kg
AED 100.88 UAE Dirham
Raised Face Flanges of Alloy steel
INR 2842.42 / Kg
USD $ 38.92 /Kg
AED 130.98 UAE Dirham
ANSI b16 5 Raised Face Flanges
INR 2500.83 / Kg
USD $ 30.74 /Kg
AED 110.95 UAE Dirham
ASME b16.47 Raised Face Flanges
INR 2602.86 / Kg
USD $ 28.12 /Kg
AED 120.02 UAE Dirham

 

What is Raised Face Flanges

Formerly made of asbestos but now made of a more environmentally friendly material, the Raised Face (RF) Flange Seal is intended to be installed between the raised faces of two mating flanges. Because the gasket surfaces are elevated above the bolting circle face, it is known as a raised face. A RF flange is used to increase the joint's ability to contain pressure by concentrating more pressure on a smaller gasket area.

 

Specification of Raised Face Flanges
Raised Face Flanges Standards ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
ASME B16.5 Raised Face Flanges Size Chart 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Raised Face Flanges Pressure Calculation in DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Raised Face Flanges
Raised Face Flanges Pressure Rating ANSI Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Raised Face Flanges
UNI 6Bar 10Bar 16Bar 25Bar 40Bar Raised Face Flanges
JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K Raised Face Flanges
Coating Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized Raised Face Flanges
EN 6Bar 10Bar 16Bar 25Bar 40Bar Raised Face Flanges
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Most common types of Raised Face Flanges Forged / Threaded / Screwed / Plate
Connect Type/ Flange Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Production technique
  • Forged, Heat treated and machined
Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations
Origin Indian / West Europe / Japan / USA / Korean
Equipment Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Raised Face Flanges Uses & application
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
Manufacturer of

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
Raised Face Flanges: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • B.S: BS4504 , BS3293, BS1560, BS10
  • AS 2129: Table D; Table E; Table H
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • American standard (ANSI)
  • German (DIN)
  • British standard (BS)
  • DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 Raised Face Flanges
  • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
Export to Saudi Arabia, Peru, Egypt, Indonesia, Brazil, Spain, USA, Canada, Ukraine, Singapore, Thailand, Oman, Ireland, Korea, Iran, India, Dubai
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

 

Pressure Rating of ANSI B16.5 Raised Face Flange
Flanges pressure rating in psig for Ring Type Joint Flange ASME 
Temperature (F°)
150#
300#
400#
600#
900#
1500#
2500#
-20 to 100
285
740
985
1480
2220
3705
6170
200
260
680
905
1360
2035
3395
5655
300
230
655
870
1310
1965
3270
5450
400
200
635
845
1265
1900
3170
5280
500
170
605
805
1205
1810
3015
5025
600
140
570
755
1135
1705
2840
4730
650
125
550
730
1100
1650
2745
4575
700
110
530
710
1060
1590
2655
4425
750
95
505
675
1015
1520
2535
4230
800
80
410
550
825
1235
2055
3430
850
65
320
425
640
955
1595
2655
900
50
230
305
460
690
1150
1915
950
35
135
185
275
410
685
1145
1000
20
85
115
170
255
430
715

 

Raised Face Flanges Dimensions/ Size Chart of Raised Face Flange
Nominal Pipe Size
NPS
(inches)
Class 150
Diameter of
Flange
(inches)
No.
of
Bolts
Diameter of
Bolts
(inches)
Diameter of
Bolt Holes
(inches)
Bolt
Circle
(inches)
1/4
3-3/8
4
1/2
0.62
2-1/4
1/2
3-1/2
4
1/2
0.62
2-3/8
3/4
3-7/8
4
1/2
0.62
2-3/4
1
4-1/4
4
1/2
0.62
3-1/8
1-1/4
4-5/8
4
1/2
0.62
3-1/2
1-1/2
5
4
1/2
0.62
3-7/8
2
6
4
5/8
0.75
4-3/4
2-1/2
7
4
5/8
0.75
5-1/2
3
7-1/2
4
5/8
0.75
6
3-1/2
8-1/2
8
5/8
0.75
7
4
9
8
5/8
0.75
7-1/2
5
10
8
3/4
0.88
8-1/2
6
11
8
3/4
0.88
9-1/2
8
13-1/2
8
3/4
0.88
11-3/4
10
16
12
7/8
1
14-1/4
12
19
12
7/8
1
17
14
21
12
1
1.12
18-3/4
16
23-1/2
16
1
1.12
21-1/4
18
25
16
1-1/8
1.25
22-3/4
20
27-1/2
20
1-1/8
1.25
25
24
32
20
1-1/4
1.38
29-1/2

 

Nominal Pipe Size
NPS
(inches)
Class 300
Diameter of
Flange
(inches)
No.
of
Bolts
Diameter of
Bolts
(inches)
Diameter of
Bolt Holes
(inches)
Bolt
Circle
(inches)
1/4
3-3/8
4
1/2
0.62
2-1/4
1/2
3-3/4
4
1/2
0.62
2-5/8
3/4
4-5/8
4
5/8
0.75
3-1/4
1
4-7/8
4
5/8
0.75
3-1/2
1-1/4
5-1/4
4
5/8
0.75
3-7/8
1-1/2
6-1/8
4
3/4
0.88
4-1/2
2
6-1/2
8
5/8
0.75
5
2-1/2
7-1/2
8
3/4
0.88
5-7/8
3
8-1/4
8
3/4
0.88
6-5/8
3-1/2
9
8
3/4
0.88
7-1/4
4
10
8
3/4
0.88
7-7/8
5
11
8
3/4
0.88
9-1/4
6
12-1/2
12
3/4
0.88
10-5/8
8
15
12
7/8
1
13
10
17-1/2
16
1
1.12
15-1/4
12
20-1/2
16
1-1/8
1.25
17-3/4
14
23
20
1-1/8
1.25
20-1/4
16
25-1/2
20
1-1/4
1.38
22-1/2
18
28
24
1-1/4
1.38
24-3/4
20
30-1/2
24
1-1/4
1.38
27
24
36
24
1-1/2
1.62
32

 

Nominal Pipe Size
NPS
(inches)
Class 400
Diameter of
Flange
(inches)
No.
of
Bolts
Diameter of
Bolts
(inches)
Diameter of
Bolt Holes
(inches)
Bolt
Circle
(inches)
1/4
3-3/8
4
1/2
0.62
2-1/4
1/2
3-3/4
4
1/2
0.62
2-5/8
3/4
4-5/8
4
5/8
0.75
3-1/4
1
4-7/8
4
5/8
0.75
3-1/2
1-1/4
5-1/4
4
5/8
0.75
3-7/8
1-1/2
6-1/8
4
3/4
0.88
4-1/2
2
6-1/2
8
5/8
0.75
5
2-1/2
7-1/2
8
3/4
0.88
5-7/8
3
8-1/4
8
3/4
0.88
6-5/8
3-1/2
9
8
7/8
1
7-1/4
4
10
8
7/8
1
7-7/8
5
11
8
7/8
1
9-1/4
6
12-1/2
12
7/8
1
10-5/8
8
15
12
1
1.12
13
10
17-1/2
16
1-1/8
1.25
15-1/4
12
20-1/2
16
1-1/4
1.38
17-3/4
14
23
20
1-1/4
1.38
20-1/4
16
25-1/2
20
1-3/8
1.5
22-1/2
18
28
24
1-3/8
1.5
24-3/4
20
30-1/2
24
1-1/2
1.62
27
24
36
24
1-3/4
1.88
32

 

Nominal Pipe Size
NPS
(inches)
Class 600
Diameter of
Flange
(inches)
No.
of
Bolts
Diameter of
Bolts
(inches)
Diameter of
Bolt Holes
(inches)
Bolt
Circle
(inches)
1/4
3-3/8
4
1/2
0.62
2-1/4
1/2
3-3/4
4
1/2
0.62
2-5/8
3/4
4-5/8
4
5/8
0.75
3-1/4
1
4-7/8
4
5/8
0.75
3-1/2
1-1/4
5-1/4
4
5/8
0.75
3-7/8
1-1/2
6-1/8
4
3/4
0.88
4-1/2
2
6-1/2
8
5/8
0.75
5
2-1/2
7-1/2
8
3/4
0.88
5-7/8
3
8-1/4
8
3/4
0.88
6-5/8
3-1/2
9
8
7/8
1
7-1/4
4
10-3/4
8
7/8
1
8-1/2
5
13
8
1
1.12
10-1/2
6
14
12
1
1.12
11-1/2
8
16-1/2
12
1-1/8
1.25
13-3/4
10
20
16
1-1/4
1.38
17
12
22
20
1-1/4
1.38
19-1/4
14
23-3/4
20
1-3/8
1.5
20-3/4
16
27
20
1-1/2
1.62
23-3/4
18
29-1/4
20
1-5/8
1.75
25-3/4
20
32
24
1-5/8
1.75
28-1/2
24
37
24
1-7/8
2
33

 

Nominal Pipe Size
NPS
(inches)
Class 900
Diameter of
Flange
(inches)
No.
of
Bolts
Diameter of
Bolts
(inches)
Diameter of
Bolt Holes
(inches)
Bolt
Circle
(inches)
1/2
4-3/4
4
3/4
0.88
3-1/4
3/4
5-1/8
4
3/4
0.88
3-1/2
1
5-7/8
4
7/8
1
4
1-1/4
6-1/4
4
7/8
1
4-3/8
1-1/2
7
4
1
1.12
4-7/8
2
8-1/2
8
7/8
1
6-1/2
2-1/2
9-5/8
8
1
1.12
7-1/2
3
9-1/2
8
7/8
1
7-1/2
4
11-1/2
8
1-1/8
1.25
9-1/4
5
13-3/4
8
1-1/4
1.38
11
6
15
12
1-1/8
1.25
12-1/2
8
18-1/2
12
1-3/8
1.5
15-1/2
10
21-1/2
16
1-3/8
1.5
18-1/2
12
24
20
1-3/8
1.5
21
14
25-1/4
20
1-1/2
1.62
22
16
27-3/4
20
1-5/8
1.75
24-1/2
18
31
20
1-7/8
2
27
20
33-3/4
20
2
2.12
29-1/2
24
41
20
2-1/2
2.62
35-1/2

 

Nominal Pipe Size
NPS
(inches)
Class 1500
Diameter of
Flange
(inches)
No.
of
Bolts
Diameter of
Bolts
(inches)
Diameter of
Bolt Holes
(inches)
Bolt
Circle
(inches)
1/2
4-3/4
4
3/4
0.88
3-1/4
3/4
5-1/8
4
3/4
0.88
3-1/2
1
5-7/8
4
7/8
1
4
1-1/4
6-1/4
4
7/8
1
4-3/8
1-1/2
7
4
1
1.12
4-7/8
2
8-1/2
8
7/8
1
6-1/2
2-1/2
9-5/8
8
1
1.12
7-1/2
3
10-1/2
8
1-1/8
1.25
8
4
12-1/4
8
1-1/4
1.38
9-1/2
5
14-3/4
8
1-1/2
1.62
11-1/2
6
15-1/2
12
1-3/8
1.5
12-1/2
8
19
12
1-5/8
1.75
15-1/2
10
23
12
1-7/8
2
19
12
26-1/2
16
2
2.12
22-1/2
14
29-1/2
16
2-1/4
2.38
25
16
32-1/2
16
2-1/2
2.62
27-3/4
18
36
16
2-3/4
2.88
30-1/2
20
38-3/4
16
3
3.12
32-3/4
24
46
16
3-1/2
3.62
39

 

Nominal Pipe Size
NPS
(inches)
Class 2500
Diameter of
Flange
(inches)
No.
of
Bolts
Diameter of
Bolts
(inches)
Diameter of
Bolt Holes
(inches)
Bolt
Circle
(inches)
1/2
5-1/4
4
3/4
0.88
3-1/2
3/4
5-1/2
4
3/4
0.88
3-3/4
1
6-1/4
4
7/8
1
4-1/4
1-1/4
7-1/4
4
1
1.12
5-1/8
1-1/2
8
4
1-1/8
1.25
5-3/4
2
9-1/4
8
1
1.12
6-3/4
2-1/2
10-1/2
8
1-1/8
1.25
7-3/4
3
12
8
1-1/4
1.38
9
4
14
8
1-1/2
1.62
10-3/4
5
16-1/2
8
1-3/4
1.88
12-3/4
6
19
8
2
2.12
14-1/2
8
21-3/4
12
2
2.12
17-1/4
10
26-1/2
12
2-1/2
2.62
21-1/4
12
30
12
2-3/4
2.88
24-3/8

 

 

Types of Raised Face Flange
Galavnized Raised Face Flanges
DIN Raised Face Pipe Flanges
Stainless Steel of Raised Face Flanges
Raised Face Steel Flanges
Slip On Raised Face Flanges
High Quality Raised Face Flanges
Flange Raised Face
Table E Raised Face Flanges
ANSI B16.5 class 150 Raised Face Flange
PN16 Raised Face Flanges
2 inch Raised Face Flanges
ANSI 150 Raised Face Flange
Carbon Steel Raised Face Flange
ANSI B16.5 Class 150 Raised Face Flanges
Raised Face Flange
ANSI Raised Face Flange
Weld Neck Raised Face Flange
Raised Face Flange Dimensions
ASME B16.5 Raised Face Flanges
4 inch Raised Face Flanges
ANSI B16.5 Raised Face Flanges
SS Raised Face Flange

 

ASTM Specification of Raised Face Flanges
  •  Alloy Steel High-Temp Raised Face Flanges
    •      A182 Gr F1 Raised Face Flanges
    •      A182 Gr F11 Raised Face Flanges
    •      A182 Gr F12 Raised Face Flanges
    •      A182 Gr F22 Raised Face Flanges
    •      A182 Gr F5 Raised Face Flanges
    •      A182 Gr F9 Raised Face Flanges
  •  Alloy Steel Low-Temp Raised Face Flanges
    •      A350 Gr LF2 Raised Face Flanges
    •      A350 Gr LF3 Raised Face Flanges
  •  Austenitic Stainless Steel Raised Face Flanges
    •      A182 Gr F304 Raised Face Flanges
    •      A182 Gr F316 Raised Face Flanges
    •      A182 Gr F321 Raised Face Flanges
    •      A182 Gr F347 Raised Face Flanges
    •      A182 Gr F304L Raised Face Flanges
    •      A182 Gr F316L Raised Face Flanges
    •      A182 Gr F317 Raised Face Flanges
    •      A182 Gr F317L Raised Face Flanges
    •      A182 Gr F321 Raised Face Flanges
    •      A182 Gr F310 Raised Face Flanges
    •      A182 Gr 347 Raised Face Flanges
  •  Nickel Alloy Raised Face Flanges
    •      ASTM B564 Raised Face Flanges
    •      astm b564 uns n06600 Raised Face Flanges
    •      astm b564 uns n06625 Raised Face Flanges
    •      astm b564 uns no4400 Raised Face Flanges
    •      astm b564 uns n08810 Raised Face Flanges
    •      astm b564 uns n08811 Raised Face Flanges
    •      astm b564 uns n08825 Raised Face Flanges
    •      astm b564 uns n04400 Raised Face Flanges
    •      astm b564 uns n10276 Raised Face Flanges
    •      astm b564 uns n10665 Raised Face Flanges
  •  Titanium Raised Face Flanges
    •      astm b381 grade f2 Raised Face Flanges
    •      astm b381 f5 Raised Face Flanges
    •      astm b381 f3 Raised Face Flanges
    •      astm b381 f12 Raised Face Flanges
    •      astm b381 f7 Raised Face Flanges
    •      Other grades: ASTM B381 F1, F2, F2H, F3, F4, F5, F6, F7,   F7H, F9, F10, F11, F12, F13, F14, F15, F16, F16H, F17, F18,   F19, F20, F21, F23, F24, F25, F26 , F26H, F27, F28, F29, F30,   F31, F32, F33, F34, F35, F36, F37, F38 Raised Face Flanges
    •  Carbon Steel Raised Face Flanges
      •      A105 Raised Face Flanges

 

Type of Raised Face Flanges we produce
Raised Face Flanges Class 900
Raised Face Flanges Flat Face
Raised Face Flanges Pn16
Kf Raised Face Flanges
Raised Face Flanges Class 2500
Raised Face Flanges Slip On
Raised Face Flanges Din 2527
Raised Face Flanges Weight 150# 
Raised Face Flanges Din 2576
Raised Face Flanges With 1/2 Npt
Raised Face Flanges Pn 64
Raised Face Flanges Ansi B16.5 150
Raised Face Flanges Class 150
Raised Face Flanges Threaded
Raised Face Flanges Pn10
Raised Face Flanges B16.47
Raised Face Flanges Pn40
Raised Face Flanges Rtj 900
Raised Face Flanges Pn 160
Raised Face Flanges Rtj
Raised Face Flanges Class 1500
Raised Face Flanges Npt
Raised Face Flanges Dn150 Pn16
Raised Face Flanges Jis 5k
Raised Face Flanges Class 600
Raised Face Flanges Jis B2220
Raised Face Flanges Asme B16.5 Class 300
Raised Face Flanges Ring Type Joint
Raised Face Flanges Din 2633
Raised Face Flanges Rtj 1500
Raised Face Flanges Class 300
Raised Face Flanges With Threaded Hole
Raised Face Flanges Din En 1092-1
Raised Face Flanges Jis 10k

 

Flanges Material of Raised Face
Stainless Steel of Raised Face Flanges ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409
Raised Face Flanges of Carbon Steel ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80)
Titanium Raised Face Flanges ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7
ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5
Raised Face Flanges of Alloy Steel ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91
Copper Nickel Raised Face Flanges ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640
Copper Raised Face Flanges T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
Inconel Raised Face Flanges ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750 Raised Face Flanges
Brass Raised Face Flanges 3602 / 2604 / H59 / H62 / etc.
Monel Raised Face Flanges ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)
Hastelloy Raised Face Flanges ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges
Aluminium Raised Face Flanges 5052 /6061/ 6063 / 2017 / 7075 / etc.
Alloy 20 Raised Face Flanges ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3
Duplex Raised Face Flanges S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Nickel Raised Face Flanges ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC
Incoloy Raised Face Flanges ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges
Super Duplex Raised Face Flanges S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Other Flanges material of Raised Face Tin bronze, Alumunum bronze, Lead bronze
Nimonic Raised Face Flanges Nimonic 75, Nimonic 80A, Nimonic 90
254 Smo Raised Face Flanges ASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547

 

Available Stock of
  •  Raised Face Flange Hdpe
  •  Slip Raised Face Flange
  •  Raised Face Flange Plumbing
  •  Api Raised Face Flange
  •  Asme Raised Face Flange
  •  Aluminum Raised Face Flange
  •  Raised Face Flange Asme B16.5
  •  Raised Face Flange Hub
  •  Raised Face Flange With Tap
  •  Harga Raised Face Flange Jis 10k
  •  Jual Raised Face Flange
  •  Raised Face Flange With Hole
  •  Raised Face Flange Water Main
  •  Grayloc Raised Face Flange
  •  Raised Face Flange With Drain
  •  Raised Face Flange With Hub
  •  Api 6a Raised Face Flange
  •  Ansi 600 Raised Face Flange
  •  Tapped Raised Face Flange
  •  Raised Face Flange Vessel
  •  Raised Face Orifice Flange
  •  Raised Face Flange Slip On
  •  A105 Raised Face Flange
  •  Raised Face Flange Raised Face
  •  Raised Face Flange Pipe
  •   Pn16 Raised Face Flange
  •  Raised Face Flange Raised Face
  •  Raised Face Raised Face Flange
  •  Raised Face Flange Rtj
  •  Awwa C207 Class D Raised Face Flange
  •  Raised Face Flange Asme
  •  Raised Face Flange Need Gasket
  •  B16.5 Raised Face Flange
  •  Raised Face Flange Bolts
  •  Raised Face Flange With Npt Thread
  •  Raised Face flange 150 lbs
  •  Raised Face flange 300 lbs
  •  Raised Face flange 600 lbs
  •  Brass Raised Face Flange
  •  alloy steel Raised Face flange
  •  Raised Face Flange Jis 16k
  •  Raised Face flange threaded
  •   En 1092-1 Raised Face Flange
  •  Raised Face Flange En 1092
  •  Victaulic Raised Face Flange
  •  Raised Face Flange End Connection
  •  Din En 1092-1 Raised Face Flange
  •  Raised Face Flange Face
  •  Class 150 Raised Face Flange
  •  Raised Face Flange Cap
  •  Carbon Steel Raised Face Flange
  •  Raised Face Flange Class 300
  •  Class 600 Raised Face Flange
  •  Raised Face Flange Drilled And Tapped
  •  B16.47 Raised Face Flange
  •  Raised Face Flange Brass
  •  Paddle Raised Face Flange
  •  Raised Face Flange With Bleed Valve
  •  Series B Raised Face Flange
  •  Raised Face Flange Asme B16.5 Class 300
  •  Kf Raised Face Flange
  •  Raised Face Flange Lifting Device
  •  Lifting Lug Raised Face Flange
  •  Raised Face Flange Lockout
  •  Raised Face Flange Npt
  •  Rtj 900 Raised Face Flange
  •  Raised Face Flange Nozzle
  •  Tapped Raised Face Flange
  •  Raised Face Flange Nps
  •  Rtj 1500 Raised Face Flange
  •  Raised Face Flange Need Gasket
  •  Raised Face Flange With Npt Tap
  •  Rtj 2500 Raised Face Flange
  •  Raised Face Flange With Npt Hole
  •  Raised Face Raised Face Flange
  •  Raised Face Flange Od Chart
  •  Raised Face Flange On P&Id
  •  Blind Kidney Flange
  •  copper nickel Raised Face flange
  •  duplex stainless steel Raised Face flange
  •  inconel Raised Face flange
  •  hastelloy Raised Face flange
  •  monel Raised Face flange
  •  Raised Face Flange Groove
  •  Raised Face Flange Jis 5k

 

The lowest cost of raised face flanges for Asme B16.5 classes 300, 150, and 600 additionally verify Raised Face Flange Sizes according DIN EN 1092-1 Check out ASME 16.48 spectacle Dimensions of the Raised Face and the Weight of the Tapped Raised Face Flange, Paddle Victaulic Raised Face Flange and Raised Face Flange

 

flange