ASTM F467 Nuts Supplier, Stockists
Commercially produced nonferrous nuts made of different alloys are covered by ASTM F467 specification. Copper, nickel, and their corresponding alloys are utilised to make these fasteners, such as ASTM F467 Lock Nut & ASTM F467 Nyloc Nuts. The nominal thread diameters range from M6 to M36 in the alloys listed below for general service applications, according to the ASTM F467 Hex Nuts specification.
Table of Content
- ASTM F467 Nuts Specification
- Price List of ASTM F467 Nuts
- Material of ASTM F467 Nuts
- ASTM F467 Nuts Size Chart
- ASTM F467 Nuts Dimensions
- ASTM F467 Heavy Hex Nut Dimensions
- Type of ASTM F467 Nuts
- ASME SF467 Nuts Chemical Composition
- ASTM F467 Nuts Equivalent Grades
- ASTM F467 Nuts Mechanical Properties
- ASTM F467 Nuts Other Types
- F467 Bolts and Nuts Application
Supplies a full range of ASTM F467 Grade 5 Nuts, ASTM F467 Hex Nuts, ASTM F467m Nuts at Factory price in India
These ASTM F467m non-ferrous nuts have a size range of approximately 14" to approximately 112". For instance, there is a demand for these ASTM F467 Metric Nuts in typical applications that demand strong mechanical characteristics. In goods like the ASME SF467 Dome Nuts, these mechanical characteristics include good hardness, a high proof stress, high proof load, and a high tensile strength.
The oil refinery, gas scrubbing, salt water equipment, acid processing plants, and the pulp and paper industry are among the industries where ASTM F467 coupling nuts are frequently used. The use of ASTM F467 Thin Nuts, the alloy composition of the finished product, and the finish applied to ASTM F467 Wing Nuts are just a few of the variables that affect how the ASTM F467 Square Nuts are applied. We produce and deliver ASTM F467 Grade 5 nuts.
carries a complete line of ASTM F467M Lock Nuts, ASTM F467 Thin Nuts, ASTM F467 Wing Nuts in mumbai, India
ASTM F467 Hex Nuts
ASTM SF467 Nuts
ASTM F467 Grade 5 Nuts
Standards |
Designation |
|---|---|
| ASTM | F467 |
| Astm F467 Nuts Delivery time | custom product will according to special requirement, Regular product is about 7-15 days |
| ASTM F467 Nuts Coatings | Cadmium, Black Oxide, Teflon, Galvanized, Zinc, Xylan, Others Upon Request |
Astm F467 Nuts Dimensions |
ASME B18.3, B18.2.1 |
Melt Origin |
South America/East Europe/Japan/Korea |
Product Origin |
Made in India |
Astm F467 Nuts Certification |
Dual Certified As per ASME & ASTM Codes |
Additional Certifications |
Merkblatt AD 2000 W2 Certified,PED 97/23/EC Certified |
Mandatory Requirements |
Free from Radioactive & Mercury Contamination |
Additional Requirements |
NACE MR0175 / MR0103 /ISO 15156 Compliance |
| Astm F467 Nuts Samples | Yes |
| Payment Terms | Western Union, T/T, Paypal, Trade Assurance 30% deposit & balance before shipping or L/C |
Stainless Steel :
AISI 302, 304, 304L,316, 316L, 310, 317, 317L, 321, 347, 410, 420,904L etc.
Duplex & Super Duplex Steel :
ASTM / ASME A815 UNS No. S31803, UNS No. S 32205, UNS No. S 31254, UNS No. S 31550, UNS No. S 32750, and UNS No. S 32760
Carbon Steel :
ASTM A307
Alloy Steel :
ASTM / ASME A/SA 193 / 194 B 6, B 7/ B 7M, B 16, 2, 2HM, 2H, GR 6, B 7, B 7M
Nickel Alloy :
ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472 UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201), UNS 4400 (MONEL 400), UNS 8825 (INCONEL 825), UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 8020 (ALLOY 20 / 20 CB 3)
- ASTM A1082 / A1082M – 16 : Specifications for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
- ASTM A962 / A962M – 16a : Specifications for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
- ASTM A638 / A638M : Specifications for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
- ASTM F2281 : Specifications for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications Designation
- ASTM A193 / A193M – 16 : Specifications for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
- ASTM A1014 / A1014M – 16 : Specifications for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
SF467 Dome Nuts
ASME SF467 Panel Nuts
F467 Wing Nuts
ASTM F467 Coupling Nuts
F467 Hex Head Nuts
ASME SF467 Eye Nuts
ASTM F467 Square Nuts
SF467 Hex Nuts
ASTM F467 Lock Nut
F467 Nylon Insert Nuts
F467 Heavy Hex Nuts
SF467 Self Locking Nuts
F467 T Nuts
ASTM F467 Acorn Nuts
ASTM F467 Nyloc Nuts
SF467 Serrated Flange Nuts
Nut Size (mm) |
Diameter* (mm) |
Height (mm) |
||
|---|---|---|---|---|
Hex Nut |
Jam Nut |
Nylock Nut |
||
2 |
4 |
1.6 |
1.2 |
- |
2.5 |
5 |
2 |
1.6 |
- |
3 |
5.5 |
2.4 |
1.8 |
4 |
4 |
7 |
3.2 |
2.2 |
5 |
5 |
8 |
4 |
2.7 |
5 |
6 |
10 |
5 |
3.2 |
6 |
7 |
11 |
5.5 |
3.5 |
- |
8 |
13 |
6.5 |
4 |
8 |
10 |
17 |
8 |
5 |
10 |
12 |
19 |
10 |
6 |
12 |
14 |
22 |
11 |
7 |
14 |
16 |
24 |
13 |
8 |
16 |
18 |
27 |
15 |
9 |
18.5 |
20 |
30 |
16 |
10 |
20 |
* This is the diameter across the flats. It is also the size of wrench to use. |
||||
India’s Largest Manufacturer of ASTM F467 Square Nuts, ASTM F467 Coupling Nuts, ASME SF467 Dome Nuts in mumbai, India
| Composition, % Copper and Copper Base Alloys |
|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
UNS Designation
|
Alloy
|
General Name
|
Aluminum
|
Copper, min
|
Iron, max
|
Manganese, max
|
Nickel, max
|
Phosphorus
|
Silicon
|
Zinc, maxA
|
Lead, max
|
Tin
|
Arsenic, max
|
|
C11000
|
110
|
ETP Copper
|
—
|
99.9
|
—
|
—
|
—
|
—
|
—
|
—
|
—
|
—
|
—
|
|
C26000
|
260
|
Brass
|
—
|
68.5 – 71.5
|
0.05
|
—
|
—
|
—
|
—
|
balance
|
0.07
|
—
|
—
|
|
C27000
|
270
|
Brass
|
—
|
63.0 – 68.5
|
0.07
|
—
|
—
|
—
|
—
|
balance
|
0.10
|
—
|
—
|
|
C46200
|
462
|
Naval Brass
|
—
|
62.0 – 65.0
|
0.10
|
—
|
—
|
—
|
—
|
balance
|
0.20
|
0.50 – 1.00
|
—
|
|
C46400
|
464
|
Naval Brass
|
—
|
59.0 – 62.0
|
0.10
|
—
|
—
|
—
|
—
|
balance
|
0.20
|
0.50 – 1.00
|
—
|
|
C51000
|
510
|
Phosphor Bronze
|
—
|
balanceA
|
0.10
|
—
|
—
|
0.03 – 0.35
|
—
|
0.30
|
0.05
|
4.20 – 5.80
|
—
|
|
C61300
|
613
|
Aluminum Bronze
|
6.0 – 7.5
|
B
|
2.0 – 3.0
|
0.10
|
0.15C
|
0.015
|
0.10
|
0.05
|
0.01
|
0.20 – 0.50
|
—
|
|
C61400
|
614
|
Aluminum Bronze
|
6.0 – 8.0
|
88.0D
|
1.5 – 3.5
|
1.00
|
—
|
—
|
—
|
—
|
—
|
—
|
—
|
|
C63000
|
630
|
Aluminum Bronze
|
9.0 – 11.0
|
78.0D
|
2.0 – 4.0
|
1.50
|
4.0 – 5.5
|
—
|
0.25 max
|
—
|
—
|
0.20 max
|
—
|
|
C64200
|
642
|
Aluminum Silicon Bronze
|
6.3 – 7.6
|
88.65D
|
0.30
|
0.10
|
0.25
|
1.50 – 2.20E
|
0.50
|
0.05
|
0.20 max
|
0.15
|
|
|
C65100
|
651
|
Silicon Bronze
|
—
|
96.0D
|
0.80
|
0.70
|
—
|
—
|
0.8 – 2.0
|
1.50
|
0.05
|
—
|
—
|
|
C65500
|
655
|
Silicon Bronze
|
—
|
94.8D
|
0.80
|
1.50
|
0.60
|
—
|
2.8 – 3.8
|
1.50
|
0.05
|
—
|
—
|
|
C66100
|
661
|
Silicon Bronze
|
0.25 max
|
94.0D
|
0.25
|
1.50
|
—
|
—
|
2.8 – 3.5
|
1.50
|
0.20 – 0.80
|
—
|
—
|
|
C67500
|
675
|
Manganese Bronze
|
—
|
57.0 – 60.0
|
0.8 – 2.0
|
0.05 – 0.50
|
—
|
—
|
—
|
balance
|
0.20
|
0.50 – 1.50
|
—
|
|
C71000
|
710
|
Cupro Nickel
|
—
|
74.0D
|
0.60
|
1.00
|
19.0 – 23.0C
|
—
|
1.00
|
0.05
|
—
|
—
|
|
|
C71500
|
715
|
Cupro Nickel
|
—
|
65.0D
|
0.40 – 0.70
|
1.00
|
29.0 – 33.0C
|
—
|
—
|
1.00
|
0.05
|
—
|
—
|
A Elements shown as balance shall be arithmetically computed by deducting the sum of the other named elements from 100.
B Copper plus specified elements = 99.8 min; copper plus silver = 88.5-91.5.
C Cobalt is to be counted as nickel
D Minimum content of copper plus all other elements with specified limits shall be 99.5%.
E An alloy containing as high as 2.5% silicon is acceptable provided the sum of all the elements other than copper, silicon and iron does not exceed 0.30 %.
**All measurements in millimeters**
Nominal Size or Basic Major Thread Diameter |
F |
G |
H |
||||||
Width Across Flats |
Width Across Corners |
Thickness |
|||||||
Basic |
Max |
Min |
Max |
Min |
Basic |
Max |
Min |
||
1/4 |
.2500 |
7/16 |
.438 |
.428 |
.505 |
.488 |
7/32 |
.226 |
.212 |
5/16 |
.3125 |
1/2 |
.500 |
.489 |
.577 |
.557 |
17/64 |
.273 |
.258 |
3/8 |
.3750 |
9/16 |
.562 |
.551 |
.650 |
.628 |
21/64 |
.337 |
.479 |
7/16 |
.4375 |
11/16 |
.688 |
.675 |
.794 |
.768 |
3/8 |
.385 |
.365 |
1/2 |
.5000 |
3/4 |
.750 |
.736 |
.866 |
.840 |
7/16 |
.448 |
.427 |
9/16 |
.5625 |
7/8 |
.875 |
.861 |
1.010 |
.982 |
31/64 |
.496 |
.473 |
5/8 |
.6250 |
15/16 |
.938 |
.922 |
1.083 |
1.051 |
35/64 |
.559 |
.535 |
3/4 |
.7500 |
1-1/8 |
1.125 |
1.088 |
1.299 |
1.240 |
41/64 |
.665 |
.617 |
7/8 |
.8750 |
1-5/16 |
1.312 |
1.269 |
1.516 |
1.447 |
3/4 |
.776 |
.724 |
1 |
1.0000 |
1-1/2 |
1.500 |
1.450 |
1.732 |
1.653 |
55/64 |
.887 |
.831 |
1-1/8 |
1.1250 |
1-11/16 |
1.688 |
1.631 |
1.949 |
1.859 |
31/32 |
.999 |
.939 |
1-3/8 |
1.3750 |
2-1/16 |
2.062 |
1.994 |
2.382 |
2.273 |
1-11/64 |
1.206 |
1.138 |
1-1/2 |
1.500 |
2-1/4 |
2.250 |
2.175 |
2.598 |
2.480 |
1-9/32 |
1.ASTM A194 GR. 8 |
1.245 |
1-5/8 |
1.6250 |
2-7/16 |
2.438 |
2.356 |
2.815 |
2.686 |
1-25/64 |
1.429 |
1.353 |
1-3/4 |
1.7500 |
2-5/8 |
2.625 |
2.538 |
3.031 |
2.893 |
1-1/2 |
1.540 |
1.460 |
2 |
2.0000 |
3 |
3.000 |
2.900 |
3.464 |
3.306 |
1-23/32 |
1.763 |
1.675 |
2-1/4 |
2.2500 |
3-3/8 |
3.375 |
3.263 |
3.897 |
3.719 |
1-15/16 |
1.986 |
1.890 |
2-1/2 |
2.5000 |
3-3/4 |
3.750 |
3.625 |
4.330 |
4.133 |
2-5/32 |
2.209 |
2.105 |
2-3/4 |
2.7500 |
4-1/8 |
4.125 |
3.988 |
4.763 |
4.546 |
2-3/8 |
2.431 |
2.319 |
Alloy Group |
Alloy Designation |
Alloy Type |
|---|---|---|
1 |
303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se |
Austenitic |
2 |
316, 316L |
Austenitic |
3 |
321, 347 |
Austenitic |
4 |
430, 430F |
Ferritic |
5 |
410, 416, 416Se |
Martensitic |
6 |
431 |
Martensitic |
7 |
630 (17-4) |
Precipitation Hardening |
Nominal Size or Basic Major Thread Diameter |
F |
G |
H |
||||||
Width Across Flats |
Width Across Corners |
Thickness |
|||||||
Basic |
Max |
Min |
Max |
Min |
Basic |
Max |
Min |
||
1/4 |
.2500 |
1/2 |
.500 |
.488 |
.577 |
.556 |
15/64 |
.250 |
.218 |
5/16 |
.3125 |
9/16 |
.562 |
.546 |
.650 |
.622 |
19/64 |
.314 |
.280 |
3/8 |
.3750 |
11/16 |
.688 |
.669 |
.794 |
.763 |
23/64 |
.377 |
.341 |
7/16 |
.4375 |
3/4 |
.750 |
.728 |
.866 |
.830 |
27/64 |
.441 |
.403 |
1/2 |
.5000 |
7/8 |
.875 |
.850 |
1.010 |
.969 |
31/64 |
.504 |
.464 |
9/16 |
.5625 |
15/16 |
.938 |
.909 |
1.083 |
1.037 |
35/64 |
.568 |
.526 |
5/8 |
.6250 |
1-1/16 |
1.062 |
1.031 |
1.227 |
1.175 |
39/64 |
.631 |
.587 |
3/4 |
.7500 |
1-1/4 |
1.250 |
1.212 |
1.443 |
1.382 |
47/64 |
.758 |
.710 |
7/8 |
.8750 |
1-7/16 |
1.438 |
1.394 |
1.660 |
1.589 |
55/64 |
.885 |
.833 |
1 |
1.0000 |
1-5/8 |
1.325 |
1.575 |
1.876 |
1.796 |
63/64 |
1.012 |
.956 |
1-1/8 |
1.1250 |
1-13/16 |
1.812 |
1.756 |
2.093 |
2.002 |
1-7/64 |
1.139 |
1.079 |
1-1/4 |
1.2500 |
2 |
2.000 |
1.938 |
2.309 |
2.209 |
1-7/32 |
1.251 |
1.187 |
1-3/8 |
1.3750 |
2-3/16 |
2.188 |
2.119 |
2.526 |
2.416 |
1-11/32 |
1.378 |
1.460 |
1-1/2 |
1.5000 |
2-3/8 |
2.375 |
2.300 |
2.742 |
2.622 |
1-15/32 |
1.505 |
1.433 |
1-5/8 |
1.6250 |
2-9/16 |
2.562 |
2.481 |
2.959 |
2.828 |
1-19/32 |
1.632 |
1.556 |
1-3/4 |
1.7500 |
2-3/4 |
2.750 |
2.662 |
3.175 |
3.035 |
1-23/32 |
1.759 |
1.679 |
2 |
2.0000 |
3-1/8 |
3.125 |
3.025 |
3.608 |
3.449 |
1-31/32 |
2.013 |
1.925 |
2-1/4 |
2.2500 |
3-1/2 |
3.500 |
3.388 |
4.041 |
3.862 |
2-13/64 |
2.251 |
2.155 |
2-1/2 |
2.5000 |
3-7/8 |
3.875 |
3.750 |
4.474 |
4.275 |
2-29/64 |
2.505 |
2.401 |
2-3/4 |
2.7500 |
4-1/4 |
4.250 |
4.112 |
4.907 |
4.688 |
2-45/64 |
2.759 |
2.647 |
3 |
3.0000 |
4-5/8 |
4.625 |
4.475 |
5.340 |
5.102 |
2-61/64 |
3.013 |
2.893 |
3-1/4 |
3.2500 |
5 |
5.000 |
4.838 |
5.774 |
5.515 |
3-3/16 |
3.252 |
3.124 |
3-1/2 |
3.5000 |
5-3/8 |
5.375 |
5.200 |
6.207 |
5.928 |
3-7/16 |
3.506 |
3.370 |
3-3/4 |
3.7500 |
5-3/4 |
5.750 |
5.562 |
6.640 |
6.341 |
3-11/16 |
3.670 |
3.616 |
4 |
4.0000 |
6-1/8 |
6.125 |
5.925 |
7.073 |
6.755 |
3-15/16 |
4.014 |
3.862 |
|
Alloy
|
Mechanical Property Marking
|
Nominal Thread Diameter, inch
|
HardnessA
|
Proof Stress, min, ksi
|
|---|---|---|---|---|
|
Copper
|
||||
|
Cu 110
|
F 467A
|
all
|
65 HRF
|
30
|
|
Cu 260
|
F 467AB
|
all
|
55 HRF
|
60
|
|
Cu 270
|
F 467B
|
all
|
55 HRF
|
60
|
|
Cu 462
|
F 467C
|
all
|
65 HRB
|
50
|
|
Cu 464
|
F 467D
|
all
|
55 HRB
|
50
|
|
Cu 510
|
F 467E
|
all
|
60 HRB
|
60
|
|
Cu 613
|
F 467F
|
all
|
70 HRB
|
80
|
|
Cu 614
|
F 467G
|
all
|
70 HRB
|
75
|
|
Cu 630
|
F 467H
|
all
|
85 HRB
|
100
|
|
Cu 642
|
F 467J
|
all
|
75 HRB
|
75
|
|
Cu 651
|
F 467K
|
all
|
75 HRB
|
70
|
|
Cu 655
|
F 467L
|
all
|
60 HRB
|
50
|
|
Cu 661
|
F 467M
|
all
|
75 HRB
|
70
|
|
Cu 675
|
F 467N
|
all
|
60 HRB
|
55
|
|
Cu 710
|
F 467P
|
all
|
50 HRB
|
45
|
|
Cu 715
|
F 467R
|
all
|
60 HRB
|
55
|
|
Nickel Alloys
|
||||
|
Ni 59 Grade 1
|
F467FN
|
all
|
21 HRC
|
120
|
|
Ni 59 Grade 2
|
F467GN
|
all
|
23 HRC
|
135
|
|
Ni 59 Grade 3
|
F467HN
|
all
|
25 HRC
|
160
|
|
Ni 59 Grade 4
|
F467JN
|
all
|
80 HRB
|
100
|
|
NI 335
|
F 467S
|
all
|
20 HRC
|
115
|
|
Ni 276
|
F 467T
|
all
|
20 HRC
|
110
|
|
Ni 400
|
F 467U
|
all
|
75 HRB
|
80
|
|
Ni 405
|
F 467V
|
all
|
60 HRB
|
70
|
|
Ni 500
|
F 467W
|
all
|
24 HRC
|
130
|
|
Ni 625
|
F 467AC
|
all
|
85 HRB – 35 HRC
|
60
|
|
Ni 686 Grade 1
|
F 467BN
|
all
|
21 HRC
|
120
|
|
Ni 686 Grade 2
|
F 467CN
|
all
|
23 HRC
|
135
|
|
Ni 686 Grade 3
|
F 467DN
|
all
|
25 HRC
|
160
|
|
Ni 686 Grade 4
|
F 467EN
|
all
|
65 HRB – 25 HRC
|
100
|
|
Aluminum
|
||||
|
Al 2024 – T4B
|
F 467X
|
all
|
70 HRB
|
55
|
|
Al 6061 – T6
|
F 467Y
|
all
|
40 HRB
|
40
|
|
Al 6262 – T9
|
F 467Z
|
all
|
60 HRB
|
52
|
|
Titanium Alloys
|
||||
|
Ti 1
|
F 467AT
|
all
|
140 HV
|
40
|
|
Ti 2
|
F 467BT
|
all
|
150 HV
|
55
|
|
Ti 4
|
F 467CT
|
all
|
200 HV
|
85
|
|
Ti 5
|
F 467DT
|
all
|
30 HRC
|
135
|
|
Ti 7
|
F 467ET
|
all
|
160 HV
|
55
|
|
Ti 19
|
F 467FT
|
all
|
24 HRC
|
120
|
|
Ti 23
|
F 467GT
|
all
|
25 HRC
|
125
|
|
Ti-5-1-1-1
|
F 467AHT
|
all
|
24 HRC
|
105
|
A For Aluminum and titanium alloys hardness values are for information only.
B Aluminum alloy 2024-T4 shall be supplied in naturally aged condition. This material is not recommended for nuts in sizes greater than 1/4 ( 0.250) inch.
ASTM F467 Nuts |
Price |
ASTM F467 hex nut |
US$ 1.50-US$ 2.00 / Piece |
ASTM F467 hexagon nut |
US$ 0.15-US$ 0.50 / Pieces |
High Tensile Fastener astm F467 coupling nut |
US $0.01-$0.10 / Piece / Piece |
ASTM F467 Hex flange nut |
US$ 0.10-US$ 2.00 / Piece |
cheap ASTM F467 nuts |
US$ 0.01 / Pieces |
ASTM F467 heavy hex nut |
US$ 0.10-US$ 1.20 / Piece |
ASTM F467 hex flange weld nut |
US$ 0.10-US$ 1.20 / Piece |
ASTM F467 Fasteners & lock nut |
US$ 1.50-US$ 2.00 / Piece |
Best Price ASTM F467 hexagon nut |
US$ 0.01-US$ 0.50 / Piece |
|
Product
|
Proof Stress, ksi
|
Test Conducted Using Full Size Product
|
|
|---|---|---|---|
|
Jam, slotted and castle nuts
|
All
|
A
|
—
|
|
All other nuts
|
Up to 120
|
—
|
A
|
|
All other nuts
|
Over 120
|
A
|
—
|
|
|
- ASTM F467 Flange Nut uses in Pharmaceuticals
- F467 Lock Nut uses in Sea Water Equipment
- F467 Coupling Nuts uses in Petrochemicals
- SF467 Wing Nuts uses in Off-Shore Oil Drilling Companies
- SF467 Acorn Nuts uses in Specialty Chemicals
- ASME SF467 Panel Nut uses in Power Generation
- F467 Flat Square Nuts uses in Pharmaceutical Equipment
- ASTM F467 Eye Nut uses in Spiral Welded tube for burner pipes and flues
- ASTM F467 Self Locking Nuts uses in Aircraft Exhaust fastenersonline
- SS F467 Nuts uses in Heat Exchangers
- F467 Dome Nut uses in Gas Processing
View ASTM F467M Hex nuts Dimensions & weight, ASTM F467 Nuts specifications.
Buy ASTM F467 Nyloc Nuts, ASTM F467 Metric Nuts, ASTM F467 Heavy Hexagon Nuts at factory price in India
