304 Stainless Steel Flanges Supplier, Stockists

Standard austenitic 18/8 stainless steel grade is 304 stainless steel flanges. One of the most adaptable and widely used stainless steel types nowadays is astm a182 grade 304. Products meeting astm a182 gr 304 are offered in a variety of fasteners and other parts.

Table of Content

ASTM A182 F304 Flanges Manufacturer In India, 304 Stainless Steel Blind Flange, DIN 1.4301 Slip On Flange, and SS 304 Pipe Flange

Excellent forming and welding properties are seen in sa182 f304. 304 stainless steel flanges can be severely deep drawn without the requirement for intermediate annealing due to their balanced austenitic microstructure. As a result, this stainless steel grade is frequently used to produce drawn stainless components for kitchen appliances like sinks, hollow-ware, and saucepans.

It is simple to brake or roll-form stainless steel 304 flanges into a variety of shapes for use in industrial, architectural, and transportation applications. Additionally, ss 304 slip on flange has excellent welding properties. While welding thin sections, the ss 304 blind flange does not need to undergo post-weld annealing treatment. 304 stainless steel flanges with heavy welded sections may need a post-weld annealing treatment to achieve the highest level of corrosion resistance.

The temperature range for heating AISI 304 flanges during solution treatment, also known as solution annealing, is 1010 °C to 1120 °C. The alloy is heated to a high temperature and then rapidly cooled. The low carbon grade 304 a182 f304 flange cannot be thermally hardened, therefore post-weld annealing is not necessary for these ss 304 flanges. As a result, heavy gauge components frequently use astm a182 f304 flanges. The astm a182 f304 material with a higher carbon content, grade 304H, is used in applications at elevated temperatures. Heavy gauge equipment is over about 6mm in thickness. These ss 304 flanges have excellent toughness properties due to the austenitic structure, even at cryogenic temperatures.

Suppliers Of SS 304 Long Weld Neck Flanges In Mumbai, Check UNS S30400 Price List

304 Stainless Steel Flanges
304 Stainless Steel Flanges
ASTM A182 F304 Flanges
ASTM A182 F304 Flanges
SS 304 Blind Flange
SS 304 Blind Flange

Check the chemical composition of SUS 304 SORF Flange and SS 304 RTJ Flange, as well as the equivalent grades and dimensions of 304 stainless steel flanges.

The performance of sa182 f304 stainless steel is excellent in a variety of atmospheric environments and corrosive mediums. However, in warm chloride-containing conditions, the stainless steel 304 flange is vulnerable to general corrosion, such as pitting and crevice corrosion. Above a temperature of 60 °C, astm a182 f304 stainless steel is also vulnerable to stress corrosion cracking. Click on this link to learn more about the price list for ss 304 flanges.

There are numerous varieties of 304 stainless steel flanges available for various sorts of pipeline jointings. The most well-known ones are the Slip on Flange, Plate Flange, Weld Neck, Blind, Long Weld Neck, Threaded, and Socket Flange made of stainless steel type 304. A PED-approved manufacturer of 304 stainless steel flanges is fastenersonline Pipe Solutions Inc. in India. Since 2008, we have been manufacturing SS 304 Pipe Flanges. We produce WNRF, SORF, SWRF, BLRF, and RTJ Flanges in all pressure ratings and in accordance with ANSI/ ASME standards.

Before purchasing flange material in India, check the class 150 304 stainless steel flange dimensions and the ss 304 flange weight table in kg. We collaborate with a South Korean flange manufacturer to create and provide premium flange materials to nations in Africa and the Far East. Due to our joint venture, we are also recognised as 304 Stainless Steel Flange manufacturers in South Korea. We are experts in pn16, pn10, and pn40 ss 304 flange. View the pressure rating for class 300 stainless steel 304 flanges. To learn more about table d and table e of the ss 304 flange, contact our specialists. bs en 1092-2 flange dimensions are also mentioned

 

Price List of SS 304 Flange
Sl No. 304 Stainless Steel Flanges Size Aprox. Wt/Unit FOB 
INR		 CIF
INR		 FOB
USD		 CIF
USD		 FOB
STGP		 CIF
STGP		 FOB
EURO$		 CIF
EURO$
1
SORF Flanges A182 Stainless Steel F304 B16.5 150#
15mm
0.49
349.60
380.00
5.297
5.758
3.567
3.878
6.356
6.909
2
SORF Flanges A182 Stainless Steel F304 B16.5 150#
20mm
0.61
434.70
472.50
6.586
7.159
4.436
4.821
7.904
8.591
3
SORF Flanges A182 Stainless Steel F304 B16.5 150#
25mm
0.90
699.20
760.00
10.594
11.515
7.135
7.755
12.713
13.818
4
SORF Flanges A182 Stainless Steel F304 B16.5 150#
32mm
1.13
737.15
801.25
11.169
12.140
7.522
8.176
13.403
14.568
5
SORF Flanges A182 Stainless Steel F304 B16.5 150#
40mm
1.48
854.45
928.75
12.946
14.072
8.719
9.477
15.535
16.886
6
SORF Flanges A182 Stainless Steel F304 B16.5 150#
50mm
2.37
1164.95
1266.25
17.651
19.186
11.887
12.921
21.181
23.023
7
SORF Flanges A182 Stainless Steel F304 B16.5 150#
65mm
3.60
2096.45
2278.75
31.764
34.527
21.392
23.253
38.117
41.432
8
SORF Flanges A182 Stainless Steel F304 B16.5 150#
80MM
4.10
2794.50
3037.50
42.341
46.023
28.515
30.995
50.809
55.227
9
SORF Flanges A182 Stainless Steel F304 B16.5 150#
100mm
6.04
3105.00
3375.00
47.045
51.136
31.684
34.439
56.455
61.364
10
SORF Flanges A182 Stainless Steel F304 B16.5 150#
125mm
6.53
3493.70
3797.50
52.935
57.538
35.650
38.750
63.522
69.045
11
SORF Flanges A182 Stainless Steel F304 B16.5 150#
150mm
7.78
4968.00
5400.00
75.273
81.818
50.694
55.102
90.327
98.182
12
SORF Flanges A182 Stainless Steel F304 B16.5 150#
200mm
12.98
9004.50
9787.50
136.432
148.295
91.883
99.872
163.718
177.955
13
SORF Flanges A182 Stainless Steel F304 B16.5 150#
250mm
17.96
11643.75
12656.25
176.420
191.761
118.814
129.145
211.705
230.114

 

Specifications of Stainless Steel 304 Flanges
Specifications Stainless Steel 304 Flange
ASME B16.5 304 Stainless Steel Flanges size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Stainless Steel 304 Flanges Standards ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flange, ASME Flange, BS Flange, DIN Flange, EN Flange, GOST Flange.
304 Stainless Steel Flanges Standard DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
Stainless Steel 304 Flanges Standard ANSI Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Stainless Steel 304 Flanges Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
Stainless Steel 304 Flanges Standard JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
Stainless Steel 304 Flanges Standard EN 6Bar 10Bar 16Bar 25Bar 40Bar
Main Types Forged / Threaded / Screwed / Plate
Flanges supporting material Gasket, Ring Joint, Flange Bolts
Stainless Steel 304 Pipe Flanges Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
304 Stainless Steel Flanges Production technique
  • Forged, Heat treated and machined
Connect Type/ Flanges Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove
Most common types of 304 Stainless Steel Flanges
  • Lap Joint Ring Flange (LJRF),304 Stainless Steel Flange
  • Socket Weld Ring Flange (SWRF), 304 Stainless Steel Flange
  • Slip-On Ring Flange (SORF), 304 Stainless Steel Flange
  • Blind Ring Flange (BLRF), 304 Stainless Steel Flange
  • Threaded Ring Flange,304 Stainless Steel Flange
  • Ring Type Joint Flange (RTJF),304 Stainless Steel Flange
  • Weld Neck Ring Flange (WNRF), 304 Stainless Steel Flange
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

Stainless Steel 304 Flange Threaded Flange, Socketweld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange
Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Origin Indian / West Europe / Japan / USA / Korean
Equipment Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Specialized manufacturer of
  • Rtj Flanges
  • Pn16 Flanges
  • DIN 2566 pn16
  • DIN 2566 en 1092 1
  • DIN 2566 pn10
  • Stainless Steel 304 Lap Joint Flanges
  • Stainless Steel 304 Loose Flange
  • Stainless Steel 304 Orifice Flange
  • Stainless Steel 304 AS 4087 Water Flanges
  • Stainless Steel 304 Weld Neck Flanges
  • Stainless Steel 304 Flanges
  • Stainless Steel 304 Slip-On Flanges
  • Stainless Steel 304 Socketweld Flange
  • Stainless Steel 304 Plate Flanges
  • Stainless Steel 304 Large Diameter Flanges
  • Stainless Steel 304 Sorf Flange
  • Stainless Steel 304 Blind Flanges
  • Stainless Steel 304 Table Flange
Stainless Steel 304 Flanges Standard

ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange, ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE,
BS Flange, EN Flange, API 6A Flange etc

  • B.S: BS4504 , BS3293, BS1560, BS10
  • AS 2129: Table D; Table E; Table H
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • American standard (ANSI)
  • German (DIN)
  • British standard (BS)
  • Any other specilised Flange
  • DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
  • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
Key markets and industries for Stainless Steel 304 Flanges
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
  • Bitumen upgraders.
  • Heavy oil refineries.
304 Stainless Steel Flanges Export to Ukraine, Singapore, Brazil, Spain, Egypt, Ireland, Indonesia, Iran, Peru, Oman, Dubai, USA, India, Thailand, Canada, Korea, Saudi Arabia, etc
Stainless Steel 304 Flanges Application
  • To Connect Pipe & Tubes in Petroleum, Power, Gas, Metallurgy, Shipbuilding Construction, Chemical etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

 

Weight Chart of SS 304 Flanges

15mm (1/2") Stainless Steel 304 Flanges Weight Chart

Pipe Normal Diam.
O.D. Flange 
Thk. Of Flange Min 
Diam.
of
Hub 
Diameter of Raised Face 
Length Hub.Y
Thread Length
Diam. 
of Bolt
Circle
Diam. 
of Bolt
Holes
Number
of Bolts
Diam. of
Bolts
(inch)
KG
LB
inch
dn
O
C
X
G
Y
T
BC
BH
BN
BD
1/2"
15
89.00
11.20
30.20
35.10
15.70
15.70
60.50
15.80
4
1/2"
0.4
0.9
3/4"
20
98.50
12.70
38.10
42.90
15.70
15.70
69.90
15.80
4
1/2"
0.7
1.5
1"
25
108.00
14.20
49.30
50.80
17.50
17.50
79.30
15.80
4
1/2"
0.8
1.8
1-1/4"
32
117.50
15.70
58.70
63.50
20.60
20.60
88.90
15.80
4
1/2"
1.2
2.6
1-1/2"
40
127.00
17.50
65.00
73.20
22.40
22.40
98.60
15.80
4
1/2"
1.5
3.3
2"
50
152.50
19.10
77.70
91.90
25.40
25.40
120.70
19.10
4
5/8"
2.3
5.1
2-1/2"
65
178.00
22.40
90.40
104.60
28.40
28.40
139.70
19.10
4
5/8"
3.7
8.1
3"
80
190.50
23.90
108.00
127.00
30.20
30.20
152.40
19.10
4
5/8"
4.1
9
3-1/2"
90
216.00
23.90
122.20
139.70
31.80
31.80
177.80
19.10
8
5/8"
5.1
11.2
4"
100
228.50
23.90
134.90
157.20
33.30
33.30
190.50
19.10
8
5/8"
5.9
13
5"
125
254.00
23.90
163.60
185.70
36.60
36.60
215.90
22.40
8
3/4"
7
15.4
6"
150
279.50
25.40
192.00
215.90
39.60
39.60
241.30
22.40
8
3/4"
8.4
18.5
8"
200
343.00
28.40
246.10
269.70
44.50
44.50
298.50
22.40
8
3/4"
13
28.6
10"
250
406.50
30.20
304.80
323.90
49.30
49.30
362.00
25.40
12
7/8"
18
39.5
12"
300
482.50
31.80
365.30
381.00
55.60
55.60
431.80
25.40
12
7/8"
29
64
14"
350
533.50
35.10
400.10
412.80
57.20
57.20
476.30
28.50
12
1"
39
86
16"
400
597.00
36.60
457.20
469.90
63.50
63.50
539.80
28.50
16
1"
47
103
18"
450
635.00
39.60
505.00
533.40
68.30
68.30
577.90
31.80
16
1 1/8"
57
126
20"
500
698.50
42.90
558.80
584.20
73.20
73.20
635.00
31.80
20
1 1/8"
76
167
24"
600
813.00
47.80
663.40
692.20
82.60
82.60
749.30
35.10
20
1 1/4"
97
214

 

Size Chart Of 304 Stainless Steel Flanges
Size Chart Of Stainless Steel 304 Flange

 

Stainless Steel 304 Pipe Flange Dimensions
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
  • ASME B1.20.1, Pipe Threads, General Purpose
  • ASME B16.1, Cast Iron Flanges and Flanged Fittings Classes 25, 125 and 250
  • ASME B16.5, Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24
  • ASME B16.11, Forged Fittings, Socket Welding and Threaded
  • ASME B16.25, Buttwelding Ends
  • ASME B16.36, Orifice Flanges
  • ASME B16.47, Large Diameter Steel Flanges NPS 26 Through NPS 60
  • ASME B31.1, Power Piping
  • ASME B31.3, Process Piping
  • ASME B46.1, Surface Texture (Surface Roughness, Waviness, and Lay)

 

Stainless Steel A182 F304 Flange Types
SS UNS S30400 Slip On Flanges (SORF)
Flanges (SORF) of SS UNS S30400 Slip
AISI 304 Stainless Steel Socket Weld Flanges (SWRF)
AISI 304 Stainless Steel Socket Weld Flanges (SWRF)
DIN 1.4301 SS Blind Flanges (BLRF)
SS Blind Flanges DIN 1.4301 (BLRF)
SUS 304 Weld Neck Flanges (WNRF)
SUS 304 Weld Neck Flanges (WNRF)
ASTM A182 Stainless Steel 304 Threaded / Screwed Flanges
ASTM A182 Stainless Steel 304 Threaded / Screwed Flanges
ASME SA182 304 SS Lap Joint Flanges
ASME SA182 304 SS Lap Joint Flanges
AStainless Steel 304 Long Weld Neck Flanges
Stainless Steel 304 Long Weld Neck Flanges
ASTM A182 Stainless Steel 304 Spectacle Blind Flanges
ASTM A182 Spectacle Blind of Stainless Steel 304 Flanges
BS 304S31 Orifice Flanges
BS 304S31 Orifice Flanges
SS 304 Square Flanges
Square Flanges
304 Stainless Steel Nipo flange
304 Stainless Steel Nipo flange
ASTM A182 SS 304 Spade Flange
ASTM A182 SS 304 Spade Flange
UNS S30400 SS Plate Flanges
UNS S30400 SS Plate Flanges
EN 1.4301 Stainless Steel Ring Type Joint Flanges (RTJ)
EN 1.4301 Stainless Steel Ring Type Joint Flanges (RTJ)
SS DIN 1.4301 Tongue & Groove Flanges
SS DIN 1.4301 Tongue & Groove Flanges
SUS 304 Reducing Flanges
SUS 304 Reducing Flanges
SUS 304 Raised Face Flanges
SUS 304 Raised Face Flanges
AISI 304 SS Male & Female Flanges
AISI 304 SS Male & Female Flanges
Stainless Steel 304 Weldoflange
Stainless Steel 304 Weldoflange
Stainless Steel 304 Puddle Flanges
Stainless Steel 304 Puddle Flanges
ASME SA182 SS 304 Ring Spacer
ASME SA182 SS 304 Ring Spacer
SUS 304 High Hub Blind Flanges
SUS 304 High Hub Blind Flanges
304 Stainless Steel Forged Flanges
304 Stainless Steel Forged Flanges
SS DIN 1.4301 Bleed Ring Flange
SS DIN 1.4301 Bleed Ring Flange

 

Pressure Ratings of Stainless Steel 304 Pipe Flange

Stainless Steel 304 Flange Standards / Types and Pressure Class :

ASME/ANSI B 16.36 Welding Neck Flange, Slip on Flange, Threaded Flange
PRESSURE CLASS 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.5 Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47 Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS 75, 150, 300, 400, 600, 900
BS 4504 SEC 3.1 Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 40
BS 4504[PART 1] Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 400
BS 1560 BOSS Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
BS10 Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE D, E, F, H
DIN FLANGES DIN 2527, 2566, 2573, 2576, 2641, 2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637, 2638, 2673
PRESSURE CLASS PN 6 TO PN 100

 

 

Grade 304 SS Flanges of Chemical Composition
Grade
C
Mn
Si
P
S
Cr
Mo
Ni
N
SS 304
0.08 max
2 max
0.75 max
0.045 max
0.030 max
18 – 20
-
8 – 11
-

 

Stainless Steel 304 Flange Equivalent Grades
STANDARD
WERKSTOFF NR.
UNS
JIS
BS
GOST
AFNOR
EN
SS 304
1.4301
S30400
SUS 304
304S31
08Х18Н10
Z7CN18‐09
X5CrNi18-10

 

Stainless Steel 304 Flanges Mechanical Properties
Density
Melting Point
Tensile Strength
Yield Strength (0.2%Offset)
Elongation
8.0 g/cm3
1400 °C (2550 °F)
Psi – 75000 , MPa – 515
Psi – 30000 , MPa – 205
35 %

 

Other Types of Stainless Steel 304 Flanges
A182 F304 SS SORF Flanges
SUS 304 Split Flange Stockist
DIN 1.4301 Stainless Steel SAE Flanges
BS 304S31 Reducing Flanges Wholesaler
Stainless Steel UNS S30400 Puddle Flange
304 Stainless Steel EN 1092-1 Flange
Stainless Steel 304 Flange Manufacturer
ASME SA182 Stainless Steel 304 Tank Flange
ASTM A182 F304 SS RTJ Flange
ASTM A182 Stainless Steel 304 Exhaust Flanges
AISI 304 Flange
Stainless Steel 304 BLRF Flanges
SS 304 Screwed Flange Exporter
304 Stainless Steel WNRF Flanges Supplier

 

ASTM A182 Stainless Steel 304 Pipe Flanges Stainless Steel 304 Raised Face Slip On Flanges
ASTM A182 Stainless Steel 304 Plate Flanges A182 Stainless Steel 304 Pipe Flanges
ASTM A182 Stainless Steel 304 Backing Flanges Stainless Steel 304 Exhaust Flanges
ASTM A182 Stainless Steel 304 Tube Flanges ASME SA182 Stainless Steel 304 Header Flanges
ASTM A182 Stainless Steel 304 Stub End Flanges Stainless Steel 304 Raised Face Weld Neck Flanges
ASTM A182 Stainless Steel 304 Exhaust Flanges ASME SA182 Stainless Steel 304 Slip On Plate Flanges
ASTM A182 Stainless Steel 304 Header Flanges Stainless Steel 304 Slip On Flanges
ASTM A182 Stainless Steel 304 Shower Rod Flanges ASTM A182 Stainless Steel 304 Sae Flanges
ASTM A182 Stainless Steel 304 Socket Weld Flanges ASTM A182 Stainless Steel 304 WNRF Flanges
ASTM A182 Stainless Steel 304 Sbc Header Flanges Stainless Steel 304 Raised Face Blind Flanges
ASTM A182 Stainless Steel 304 Split Flanges ASME SA182 Stainless Steel 304 Blind Flanges
ASTM A182 Stainless Steel 304 Slip-On Pipe Flanges Stainless Steel 304 Blind Flanges
ASTM A182 Stainless Steel 304 Slip On Flanges Stainless Steel 304 Weld Neck Flanges
ASTM A182 Stainless Steel 304 Screwed Flanges ASTM A182 Stainless Steel 304 Clad Flanges
ASTM A182 Stainless Steel 304 Square Flanges ASTM A182 Stainless Steel 304 Ansi Flanges
Ansi 150 ASTM A182 Stainless Steel 304 Flanges ASTM A182 Stainless Steel 304 BLRF Flanges
ASTM A182 Stainless Steel 304 Blank Flanges Stainless Steel 304 Orifice Flanges
ASTM A182 Stainless Steel 304 Bsp Flanges ASME SA182 Stainless Steel 304 Orifice Flanges
ASTM A182 Stainless Steel 304 Companion Flanges Stainless Steel 304 Orifice Flanges
ASTM A182 Stainless Steel 304 Class 150 Flanges ASTM A182 Stainless Steel 304 Duct Flanges
ASTM A182 Stainless Steel 304 Cover Flanges A182 Stainless Steel 304 Orifice Flanges
Large Diameter ASTM A182 Stainless Steel 304 Flanges ASTM A182 Stainless Steel 304 SWRF Flanges
Table E ASTM A182 Stainless Steel 304 Flanges ASME B16.5 Stainless Steel 304 Socket weld Flanges
ASTM A182 Stainless Steel 304 Floor Flanges Stainless Steel 304 Flanges
ASTM A182 Stainless Steel 304 Forged Flanges ASME SA182 Stainless Steel 304 Flanges
Gaskets For ASTM A182 Stainless Steel 304 Flanges Stainless Steel 304 Flanges
ASTM A182 Stainless Steel 304 Handrail Flanges ASTM A182 Stainless Steel 304 fastenersonline Flanges
High Pressure ASTM A182 Stainless Steel 304 Flanges ASTM A182 Stainless Steel 304 Flanges
ASTM A182 Stainless Steel 304 Lap Joint Flanges ASTM A182 Stainless Steel 304 Flanges
Custom ASTM A182 Stainless Steel 304 Flanges Stainless Steel 304 Socket weld Flanges
Class 600 ASTM A182 Stainless Steel 304 Flanges ASME SA182 Stainless Steel 304 Socket weld Flanges
ASTM A182 Stainless Steel 304 Din Flanges Stainless Steel 304 Socket weld Flanges
ASTM A182 Stainless Steel 304 Long Weld Neck Flanges Stainless Steel 304 Long weld Neck Flanges
ASTM A182 Stainless Steel 304 Metric Flanges ASME SA182 Stainless Steel 304 Long weld Neck Flanges
ASTM A182 Stainless Steel 304 Muffler Flanges Stainless Steel 304 Long weld Neck Flanges
ASTM A182 Stainless Steel 304 Pump Flanges ASTM A182 Stainless Steel 304 Orifice Flanges
ASTM A182 Stainless Steel 304 Pressed Flanges Stainless Steel 304 Ring Type Joint Flanges
ASTM A182 Stainless Steel 304 Puddle Flanges ASME SA182 Stainless Steel 304 Ring Type Joint Flanges
ASTM A182 Stainless Steel 304 Pad Flanges Stainless Steel 304 RTJ Flanges
ASTM A182 Stainless Steel 304 Reducing Flanges Stainless Steel 304 RTJ Flanges
ASTM A182 Stainless Steel 304 Raised Face Flanges ASTM A182 Stainless Steel 304 RTJ Flanges
ASTM A182 Stainless Steel 304 Ring Flanges BS4504 Stainless Steel 304 RTJ Flanges
ASTM A182 Stainless Steel 304 Reducing Flanges Stainless Steel 304 Reducing Flanges
ASTM A182 Stainless Steel 304 Wnrf Flanges ASME SA182 Stainless Steel 304 Reducing Flanges
ASTM A182 Stainless Steel 304 Split Flanges Stainless Steel 304 Reducing Flanges
ASTM A182 Stainless Steel 304 Turbo Flanges ASTM A182 Stainless Steel 304 Forged Flanges
ASTM A182 Stainless Steel 304 Vacuum Flanges ASTM A182 Stainless Steel 304 Reducing Flanges
ASTM A182 Stainless Steel 304 Reducing Flanges Stainless Steel 304 Forged Flanges

 

Application of Stainless Steel 304 Flanges
  •  SA182 SS 304 Flanges uses in Expansion joints
  •  304 Stainless Steel Flanges uses in Bellows
  •  304 Stainless Steel Flange uses in Furnace parts
  •  Stainless Steel 304 Flange uses in Heat Exchangers
  •  DIN 1.4301 Stainless Steel Flanges uses in Woven or welded screens for high temperature mineral processing
  •  ASTM A182 SS 304 Blind Flange uses in Spiral Welded tube for burner pipes and flues
  •  ASTM A182 304 SS Flange uses in Aircraft exhaust fastenersonline
  •  UNS S30400 SS Flanges uses in Heating element tubing

 

Stocking Distributors of Stainless Steel 304 Flanges
Flange Schedule/Class
Pipe Size - Pipe Flanges
Flange Connection Type
Flange Material
Max. Pressure
ASME B16.5 Class 150
1/2"
FNPT
Stainless Steel 304 Flanges
150 psi
ASME B16.5 Class 150
1/2"
Socket Weld
Stainless Steel 304 Flanges
275 psi
ASME B16.5 Class 150
1/2"
Welded
Stainless Steel 304 Flanges
150 psi
ASME B16.5 Class 150
3/4"
FNPT
Stainless Steel 304 Flanges
150 psi
ASME B16.5 Class 150
3/4"
Socket Weld
Stainless Steel 304 Flanges
275 psi
ASME B16.5 Class 150
1-1/4"
Socket Weld
Stainless Steel 304 Flanges
275 psi
ASME B16.5 Class 150
1-1/2"
Socket Weld
Stainless Steel 304 Flanges
275 psi
ASME B16.5 Class 150
2"
FNPT
Stainless Steel 304 Flanges
150 psi
ASME B16.5 Class 150
2"
Socket Weld
Stainless Steel 304 Flanges
275 psi
ASME B16.5 Class 150
2-1/2"
Socket Weld
Stainless Steel 304 Flanges
275 psi
ASME B16.5 Class 150
3"
Socket Weld
Stainless Steel 304 Flanges
275 psi
ASME B16.5 Class 150
4"
FNPT
Stainless Steel 304 Flanges
150 psi
ASME B16.5 Class 150
4"
Socket Weld
Stainless Steel 304 Flanges
275 psi
ASME B16.5 Class 300
1/2"
Slip On
Stainless Steel 304 Flanges
720 psi
ASME B16.5 Class 300
1/2"
Slip On
Stainless Steel 304 Flanges
720 psi
ASME B16.5 Class 300
1"
Slip On
Stainless Steel 304 Flanges
720 psi
ASME B16.5 Class 300
1"
Slip On
Stainless Steel 304 Flanges
720 psi
ASME B16.5 Class 300
1-1/4"
FNPT
Stainless Steel 304 Flanges
720 psi
ASME B16.5 Class 300
1-1/4"
Slip On
Stainless Steel 304 Flanges
720 psi
ASME B16.5 Class 300
1-1/2"
Slip On
Stainless Steel 304 Flanges
720 psi
ASME B16.5 Class 300
1-1/2"
Slip On
Stainless Steel 304 Flanges
720 psi
ASME B16.5 Class 300
2"
Slip On
Stainless Steel 304 Flanges
720 psi
ASME B16.5 Class 300
2"
Slip On
Stainless Steel 304 Flanges
720 psi
ASME B16.5 Class 300
2-1/2"
Slip On
Stainless Steel 304 Flanges
720 psi
ASME B16.5 Class 300
2-1/2"
Slip On
Stainless Steel 304 Flanges
720 psi
ASME B16.5 Class 300
3"
Slip On
Stainless Steel 304 Flanges
720 psi
ASME B16.5 Class 300
3"
Slip On
Stainless Steel 304 Flanges
720 psi
ASME B16.5 Class 300
4"
Slip On
Stainless Steel 304 Flanges
720 psi
ASME B16.5 Class 300
4"
Slip On
Stainless Steel 304 Flanges
720 psi

 

Stainless Steel 304 Forged and Plate Flanges
Stainless Steel 304 Flanges
Stainless Steel 304 Blind Flanges Stainless Steel 304 Reducing Flanges
Stainless Steel 304 Lap Joint Flanges Stainless Steel 304 Plate Flanges
Stainless Steel 304 Orifice Flanges Stainless Steel 304 Forged Flanges
Stainless Steel 304 Slip-On Flanges Stainless Steel 304 Flanges
Stainless Steel 304 Weld Neck Flanges Stainless Steel 304 Socket Weld Flanges
Stainless Steel 304 Ring Type Joint Flanges

 

View ANSI/ ASME B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA Flange Specifications, and BS EN 10088-3 Pipe Flange Price In Mumbai. Wrought austenitic stainless steel 304 Class 300 Orifice Flange and ASME SA182M Grade 304 Flanges Trader and Stockist In India

 

flange