Bs 10 Flanges Dimensions

A standard Specification for Flanges and Bolting for Pipes, Valves, and Fittings is the British Standard BS10, 1962. The boss, plain, integrally cast or forged, and welding neck type flanges are covered by the bs 10 flange dimensions in mm.

Table of Content

Buy Bs 10 Table D Flanges, Bs 10 Flange Material, Bs 10 Standard Flanges, Bs 10 Flanges Neck at factory price in India

The bs 10 flange chart is still used to determine the dimensions of light duty, affordable stainless steel flanges even if the bs 10 table of pipe flanges is no longer in use. Instead of those situations where high pressures and temperatures are the main considerations, the bs 10 flange material is employed where either corrosion resistance or hygiene, or both of these attributes, are required.

Features of the bs 10 table flanges include the following :

  •  The BS 10 E flange doesn't require or necessitate any sort of handling procedure.
  •  The bs 10 flanges neck performs well under conditions of high pressure and high temperature.
  •  As one of the most affordable options available, bs 10 flanges are renowned for their durability and high performance.
  •  These ASTM B10 standard flanges may be made of heavy metals and alloys, including stainless steel, carbon steel, and alloys including nickel, copper, and other elements. Depending on the intended purpose of the product, duplex and super duplex stainless steel can also be used to create bs 10 table d flanges.

Zinc plating can be used to slightly increase the weight of bs 10 flanges. There are two ways that zinc can be applied as a surface treatment.

  •  The flange is coated with a thick layer of zinc when it is cold and hot dip galvanised. This BS-10 td' flange is corrosion-resistant due to the protective zinc coating.
  •  Similar to galvanization, the BS 10-D flange is electroplated with a thin layer of zinc to give it a zinc finish. Although similar, a plated flange's corrosion resistance is lower than that of a galvanised one.

Depending on the needs of the buyer, further surface treatments include coating the flanges with oil black paint, yellow transparent paint, or anti-rust paint.

The sizes of bs 10 flanges range from DN10 to DN5000, or 12 inch (15 NB) to 48 inch (1200 NB). The four most used types of bs 10 flange pressure ratings are forged, plate threaded, screwed. The bs 10 flanges table can be produced using any one of these methods, or a combination of them, i.e. Heat-treated, forged, and machined

Bs 10 E Flange, Carries a complete line of Bs 10 Flanges Table, Bs 10- D Flange in mumbai, India

ASME BS 10 Flanges
ASME BS 10 Flanges
BS 10 PN 10 Flange
BS 10 PN 10 Flange
ASME B16.5 BS 10 Forged Flange
ASME B16.5 BS 10 Forged Flange

 

Specification and Standards of ASME BS 10 Flanges
Specifications BS 10 Flanges
BS Flange Standards ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges.
ASME B16.5 BS Flange size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
BS Flange Standard DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
BS Flange Standard ANSI Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
BS Flange Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
BS Flange Standard EN 6Bar 10Bar 16Bar 25Bar 40Bar
BS Flange Standard BS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
Main Types Forged / Threaded / Screwed / Plate
Flange supporting material Gasket, Ring Joint, Flange Bolts
Most common types of BS Flanges
  • Socket Weld Ring Flange (SWRF), BS
  • Threaded Ring Flange, BS
  • Blind Ring Flange (BLRF), BS
  • Weld Neck Ring Flange (WNRF), BS
  • Slip-On Ring Flange (SORF), BS
  • Ring Type Joint Flange (RTJF), BS
  • Lap Joint Ring Flange (LJRF), BS
Connect Type/ Flange Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove
BS Pipe Flanges Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production technique
  • Forged, Heat treated and machined
Special design

As per your drawing

AS, ANSI, BS, DIN and BS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

BS Threaded Flange, Socketweld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange
Specialized manufacturer of
  • DIN 2566 en 1092 1
  • Pn16 Flange
  • DIN 2566 pn16
  • Rtj Flange
  • BS Sorf Flange
  • BS Table Flanges
  • DIN 2566 pn10
  • BS Large Diameter Flange
  • BS Threaded Flanges
  • BS Blind Flanges
  • BS Plate Flanges
  • BS Weld Neck Flanges
  • BS Loose Flanges
  • BS Orifice Flanges
  • BS Slip-On Flanges
  • BS Lap Joint Flanges
  • BS Socketweld Flanges
  • BS AS 4087 Water Flanges
Test Hydrostatic testing machine, Direct-reading Spectrograph,UI trasonic flaw detector, X-ray detector, Magnetic particle detector
Equipment Bending machine, Press machine, electric bevelling machine, Pushing Machine, Sand-blasting machine etc
Origin West Europe /Indian / USA / Japan / BS
BS Flanges Standard

ANSI DIN, GOST, BS, UNI, BS, AS2129, BS, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, BS/ KS Flange, BS4504 Flange, GB Flange, BS Flange, GOST Flange, PSI Flange

  • AS 2129: Table D; Table E; Table H
  • B.S: BS4504 , BS3293, BS1560, BS10
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, BS, Custom Drawings
  • American standard (ANSI)
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • British standard (BS)
  • German (DIN)
  • Any other specilised flanges
  • The other standard: BS; EN1092-1, GOST12820, BS; KS B1503, SABS1123; NFE29203;UNI2276
  • DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
Key markets and industries for BS Flangeo
  • Nuclear power (mostly seamless).
  • Heavy oil refineries.
  • Bitumen upgraders.
  • Petrochemicals and acids.
Export to Indonesia, Ireland, Ukraine, Singapore,Saudi Arabia,Canada, Peru, Dubai, Brazil, Iran, Korea, USA, India, Egypt, Thailand, Spain, Oman etc
BS Flanges Application
  • To Connect Pipe & Tubes in Power, Petroleum,Construction, Chemical, Gas, Shipbuilding,Metallurgy, etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

 

BS 10 Forged and Plate Flange
BS 10 Flange
BS 10 Ring Type Joint Flange
BS 10 Square Flange
BS 10 Blind Flange
BS 10 Reducing Flange
BS 10 Orifice Flange
BS 10 Forged Flange
BS 10 Lap Joint Flange
BS 10 Plate Flange
BS 10 Weld Neck Flange
BS 10 Socket Weld Flange
BS 10 Slip-On Flange
BS 10 Threaded Flange

 

ASME B16.5 BS 10 Flanges manufacturers
Class 600 BS 10 High Hub Blind Flange
Class 600 BS 10 High Hub Blind Flange
10 BS Bleed Rings
10 BS Bleed Rings
B16.5 BS 10 Forged Flange
B16.5 BS 10 Forged Flange
BS 10 Spacer Flange
BS 10 Spacer Flange
BS 10 Long WN Flange
BS 10 Long WN Flange
BS Grade 10 Screw Flange
BS Grade 10 Screw Flange
ASME BS 10 Spectacle Blind Flange
ASME BS 10 Spectacle Blind Flange
10 BS Lap Joint Flanges
10 BS Lap Joint Flanges
Class 600 BS 10 Puddle Flanges
Class 600 BS 10 Puddle Flanges
BS 10 Male & Female Flange
BS 10 Male & Female Flanges
ASME BS 10 Raised Face Flanges
ASME BS 10 Raised Face Flanges
ASME B16.5 BS 10 Weldoflange
ASME B16.5 BS 10 Weldoflange
ASME B16.5 BS 10 Spade Flange
ASME B16.5 BS 10 Spade Flange
ASME BS 10 Square Flange
ASME BS 10 Square Flange
B16.5 BS 10 Orifice Flange
B16.5 BS 10 Orifice Flange
BS 10 Nipolet Flange
BS 10 Nipolet Flange
BS 10 Blind Flanges
BS 10 Blind Flanges
BS 10 Class 150 Weld Neck Flanges
BS 10 Class 150 Weld Neck Flanges
ASME B16.5 BS 10 Socket Weld Flange
ASME B16.5 BS 10 Socket Weld Flange
Class 600 BS 10 Slip On Flange
Class 600 BS 10 Slip On Flange
BS 10 Reducing Flange
BS 10 Reducing Flange
ASME BS 10 Ring Joint Flange
ASME BS 10 Ring Joint Flange
ASME B16.5 BS 10 Plate Flange
ASME B16.5 BS 10 Plate Flange
10 BS Tongue & Groove Flange
10 BS Tongue & Groove Flanges

 

BS 10 Pipe Flange Dimensions

British BS 10 Table D Flange Specification

N.B. SIZE
D
K
L
A
C
N1
N2
B
H1
H2
R1
R2
HOLES
IN
mm
 
 
 
 
 
 
 
 
 
 
 
 
 
½”
15
95.3
66.8
14.5
21.3
4.8
27.0
33.3
22.4
9.5
22.2
6.4
1.6
4
¾”
20
101.6
73.2
14.5
26.7
4.8
33.3
38.1
27.7
11.1
22.2
6.4
1.6
4
1″
25
114.3
82.6
14.5
33.5
4.8
42.9
47.6
34.6
11.1
22.2
6.4
1.6
4
1 ¼”
32
120.7
87.4
14.5
42.2
6.4
49.2
55.6
43.2
11.1
25.4
6.4
1.6
4
1 ½”
40
133.4
98.6
14.5
48.3
6.4
58.7
61.9
49.5
12.7
28.6
6.4
1.6
4
2″
50
152.4
114.3
17.5
60.5
7.9
69.9
74.6
62.0
12.7
28.6
6.4
1.6
4
2 ½”
65
165.1
127.0
17.5
73.2
7.9
82.6
90.5
74.7
15.9
31.8
6.4
1.6
4
3″
80
184.2
146.1
17.5
88.9
9.7
101.6
106.4
90.7
15.9
34.9
6.4
1.6
4
3 ½”
88
203.2
165.1
17.5
101.6
9.7
114.3
119.1
103.4
17.5
34.9
6.4
1.6
4
4″
100
215.9
177.8
17.5
114.3
9.7
130.2
133.4
116.1
19.1
41.3
9.5
3.2
4
5″
125
254.0
209.6
17.5
141.2
12.7
152.4
160.3
143.8
19.1
44.5
9.5
3.2
8
6″
150
279.4
235.0
17.5
168.4
12.7
184.2
185.7
171.7
19.1
47.6
9.5
3.2
8
8″
200
336.6
292.1
17.5
219.2
12.7
241.3
241.3
221.5
22.2
50.8
9.5
3.2
8
10″
250
406.4
355.6
22.2
273.1
16.0
292.1
298.5
276.4
27.0
63.5
9.5
3.2
8
12″
300
457.2
406.4
22.2
323.9
19.1
342.9
349.3
325.9
28.6
69.9
9.5
4.8
12
14″
350
527.1
469.9
25.4
355.6
22.2
406.4
-
359.2
-
73.0
9.5
4.8
12
16″
400
577.9
520.7
25.4
406.4
22.2
-
-
410.5
-
-
-
-
12
18″
450
641.4
584.2
25.4
457.2
25.4
-
-
461.8
-
-
-
-
12
20″
500
704.9
641.4
25.4
508.0
28.6
-
-
513.1
-
-
-
-
16
24″
600
825.5
755.7
28.7
609.6
31.8
-
-
616.0
-
-
-
-
16

 

BS 10 Pipe Flange Pressure Ratings

BS 10 Flanges Flange Standards / Types and Pressure Class :

ASME/ANSI B 16.36 Welding Neck Flange, Slip on Flange, Threaded Flange
PRESSURE CLASS 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.5 Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47 Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS 75, 150, 300, 400, 600, 900
BS 10 SEC 3.1 Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 40
BS 10[PART 1] Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 400
BS 1560 BOSS Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
BS10 Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE D, E, F, H
DIN FLANGES DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS PN 6 TO PN 100

 

Dimensions of BS 10 Table E Flange

Dimensions & Approximate Masses of BS 10 Table E Flange

British BS 10 Table E Flange Specification

 

N.B. SIZE
D
K
L
A
C
N1
N2
B
H1
H2
R1
R2
HOLES
IN
mm
 
 
 
 
 
 
 
 
 
 
 
 
 
½”
15
95.3
66.8
14.5
21.3
6.4
27.0
33.3
22.4
9.5
22.2
6.4
1.6
4
¾”
20
101.6
73.2
14.5
26.7
6.4
33.3
38.1
27.7
11.1
22.2
6.4
1.6
4
1″
25
114.3
82.6
14.5
33.5
7.2
42.9
47.6
34.6
11.1
22.2
6.4
1.6
4
1 ¼”
32
120.7
87.4
14.5
42.2
7.9
49.2
55.6
43.2
11.1
25.4
6.4
1.6
4
1 ½”
40
133.4
98.6
14.5
48.3
8.7
58.7
61.9
49.5
12.7
28.6
6.4
1.6
4
2″
50
152.4
114.3
17.5
60.5
9.5
69.9
74.6
62.0
12.7
28.6
6.4
1.6
4
2 ½”
65
165.1
127.0
17.5
73.2
10.3
82.6
90.5
74.7
15.9
31.8
6.4
1.6
4
3″
80
184.2
146.1
17.5
88.9
11.1
101.6
106.4
90.7
15.9
34.9
6.4
1.6
4
3 ½”
88
203.2
165.1
17.5
101.6
11.9
114.3
119.1
103.4
17.5
34.9
6.4
1.6
4
4″
100
215.9
177.8
17.5
114.3
12.7
130.2
133.4
116.1
19.1
41.3
9.5
3.2
4
5″
125
254.0
209.6
17.5
141.2
14.3
152.4
160.3
143.8
19.1
44.5
9.5
3.2
8
6″
150
279.4
235.0
17.5
168.4
17.5
184.2
185.7
171.7
19.1
47.6
9.5
3.2
8
8″
200
336.6
292.1
17.5
219.2
19.1
241.3
241.3
221.5
22.2
50.8
9.5
3.2
8
10″
250
406.4
355.6
22.2
273.1
22.2
292.1
298.5
276.4
27.0
63.5
9.5
3.2
8
12″
300
457.2
406.4
22.2
323.9
25.4
342.9
349.3
325.9
28.6
69.9
9.5
4.8
12
14″
350
527.1
469.9
25.4
355.6
28.6
406.4
-
359.2
-
73.0
9.5
4.8
12
16″
400
577.9
520.7
25.4
406.4
31.8
431.8
-
410.5
-
-
-
-
12
18″
450
641.4
584.2
25.4
457.2
34.9
-
-
461.8
-
-
-
-
12
20″
500
704.9
641.4
25.4
508.0
38.1
-
-
513.1
-
-
-
-
16
24″
600
825.5
755.7
28.7
609.6
47.6
-
-
616.0
-
-
-
-
16

 

Dimensions of ASME BS 10 Table F Flange

Dimensions & Approximate Masses of BS 10 Table F Flange

British BS 10 Table F Flange Specification

 

N.B. SIZE
D
K
L
A
C
N1
N2
B
H1
H2
R1
R2
HOLES
IN
mm
 
 
 
 
 
 
 
 
 
 
 
 
 
½”
15
95.3
66.8
14.5
21.3
6.4
27.0
33.3
22.4
9.5
22.2
6.4
1.6
4
¾”
20
101.6
73.2
14.5
26.7
6.4
33.3
38.1
27.7
11.1
22.2
6.4
1.6
4
1″
25
114.3
82.6
14.5
33.5
7.2
42.9
47.6
34.6
11.1
22.2
6.4
1.6
4
1 ¼”
32
120.7
87.4
14.5
42.2
7.9
49.2
55.6
43.2
11.1
25.4
6.4
1.6
4
1 ½”
40
133.4
98.6
14.5
48.3
8.7
58.7
61.9
49.5
12.7
28.6
6.4
1.6
4
2″
50
152.4
114.3
17.5
60.5
9.5
69.9
74.6
62.0
12.7
28.6
6.4
1.6
4
2 ½”
65
165.1
127.0
17.5
73.2
10.3
82.6
90.5
74.7
15.9
31.8
6.4
1.6
4
3″
80
184.2
146.1
17.5
88.9
11.1
101.6
106.4
90.7
15.9
34.9
6.4
1.6
4
3 ½”
88
203.2
165.1
17.5
101.6
11.9
114.3
119.1
103.4
17.5
34.9
6.4
1.6
4
4″
100
215.9
177.8
17.5
114.3
12.7
130.2
133.4
116.1
19.1
41.3
9.5
3.2
4
5″
125
254.0
209.6
17.5
141.2
14.3
152.4
160.3
143.8
19.1
44.5
9.5
3.2
8
6″
150
279.4
235.0
17.5
168.4
17.5
184.2
185.7
171.7
19.1
47.6
9.5
3.2
8
8″
200
336.6
292.1
17.5
219.2
19.1
241.3
241.3
221.5
22.2
50.8
9.5
3.2
8
10″
250
406.4
355.6
22.2
273.1
22.2
292.1
298.5
276.4
27.0
63.5
9.5
3.2
8
12″
300
457.2
406.4
22.2
323.9
25.4
342.9
349.3
325.9
28.6
69.9
9.5
4.8
12
14″
350
527.1
469.9
25.4
355.6
28.6
406.4
-
359.2
-
73.0
9.5
4.8
12
16″
400
577.9
520.7
25.4
406.4
31.8
431.8
-
410.5
-
-
-
-
12
18″
450
641.4
584.2
25.4
457.2
34.9
-
-
461.8
-
-
-
-
12
20″
500
704.9
641.4
25.4
508.0
38.1
-
-
513.1
-
-
-
-
16
24″
600
825.5
755.7
28.7
609.6
47.6
-
-
616.0
-
-
-
-
16

 

ASME BS 10 Flanges Weight Chart

15mm (1/2") BS 10 Flange Weight Chart

Standard
Class
Diameter
Bolt Circle Diameter
Number of Bolts
Bolt Size
Diameter of Bolt Hole
AS4087 Flanges
PN14 Flanges
95
67
4
M12
14
AS 2129 Flange
Table C Flanges
95
67
4
13
14
Table D Flanges
95
67
4
13
14
Table E Flanges
95
67
4
13
14
Table F Flanges
95
67
4
13
14
Table H Flanges
114
83
4
16
17
Table J Flanges
114
83
4
16
17
ANSI B16.5 Flanges
ANSI 150 Flanges
89
60
4
13
16
ANSI 300 Flanges
95
67
4
13
16
ANSI 600 Flanges
95
67
4
13
16
ANSI 900 Flanges
121
83
4
19
22
ANSI 1500 Flanges
121
83
4
19
22
BS 10 (DIN) Flange
PN6 Flanges
80
55
4
M10
11
PN10 Flanges
95
65
4
M12
14
PN16 Flanges
95
65
4
M12
14
PN20 Flanges
90
60.5
4
M14
16
PN25 Flanges
95
65
4
M12
14
PN40 Flanges
95
65
4
M12
14

 

We are dedicated Bs-10 Td' Flange, Flanges As Per Bs 10 Table E, Bs 10 Table Of Pipe Flanges suppliers in Mumbai, India

BS 10 Flange other types
BS 10 Table D Wnrf Flanges
ASME BS 10 Table D Reducing Flanges
BS 10 Table D Split Flanges
BS 10 Table D Reducing Flange
BS 10 Table D Slip-On Pipe Flanges
BS 10 Table D Blind Flange
BS 10 Table D Turbo Flanges
BS 10 Table D Forged Flanges
BS 10 Table D Split Flanges
ASME BS 10 Table D Blind Flanges
BS 10 Table D Square Flanges
BS 10 Table D Ansi Flanges
BS 10 Table D Threaded Reducing Flanges
BS 10 Table D Reducing Flanges
BS 10 Table D Muffler Flanges
BS 10 Table D Long weld Neck Flanges
BS 10 Table D Reducing Flanges
BS 10 Table D Forged Flange
BS 10 Table D Vacuum Flanges
BS 10 Table D Reducing Flange
Ansi 150 BS 10 Table D Flanges
BS 10 Table D JIS BLRF Flanges
BS 10 Table D Bsp Flanges
ASME BS 10 Table D Orifice Flanges
BS 10 Table D Companion Flanges
BS 10 Table D Orifice Flanges
BS 10 Table D Class 150 Flanges
BS 10 Table D Duct Flanges
BS 10 Table D Blank Flanges
BS 10 Table D Orifice Flanges
BS 10 Table D Cover Flanges
BS 10 Table D Orifice Flanges
BS 10 Table D Din Flanges
BS 10 Table D Socket weld Flanges
Large Diameter BS 10 Table D Flanges
BS 10 Table D SWRF Flanges
Class 600 BS 10 Table D Flanges
ASME BS 10 Table D Socket weld Flanges
Table E BS 10 Table D Flanges
ASME B16.5 BS 10 Table D Socket weld Flanges
BS 10 Table D Backing Flanges
BS 10 Table D Exhaust Flanges
BS 10 Table D Floor Flanges
BS 10 Table D Threaded Flanges
BS 10 Table D Forged Flanges
ASME BS 10 Table D Threaded Flanges
Gaskets For BS 10 Table D Flanges
BS 10 Table D Threaded Flanges
High Pressure BS 10 Table D Flanges
BS 10 Table D Threaded Flanges
Custom BS 10 Table D Flanges
BS 10 Table D Socket weld Flanges
BS 10 Table D Lap Joint Flanges
BS 10 Table D Threaded Flanges
BS 10 Table D Handrail Flanges
BS 10 Table D fastenersonline Flanges
BS 10 Table D Pipe Flanges
BS 10 Table D Raised Face Slip On Flanges
BS 10 Table D Exhaust Flanges
ASME BS 10 Table D Slip On Plate Flanges
BS 10 Table D Plate Flanges
BS 10 Table D Pipe Flanges
BS 10 Table D Long Weld Neck Flanges
BS 10 Table D Long weld Neck Flanges
BS 10 Table D Tube Flanges
ASME BS 10 Table D Header Flanges
BS 10 Table D Header Flanges
BS 10 Table D Slip On Flanges
BS 10 Table D Sbc Header Flanges
BS 10 Table D Raised Face Blind Flanges
BS 10 Table D Pressed Flanges
BS 10 Table D Ring Type Joint Flanges
BS 10 Table D Metric Flanges
ASME BS 10 Table D Long weld Neck Flanges
BS 10 Table D Puddle Flanges
BS 10 Table D Ring Type Joint Flange
BS 10 Table D Pad Flanges
BS 10 Table D RTJ Flanges
BS 10 Table D Reducing Flanges
BS 10 Table D RTJ Flanges
BS 10 Table D Socket Weld Flanges
BS 10 Table D WNRF Flange
BS 10 Table D Raised Face Flanges
BS 10 Table D RTJ Flanges
BS 10 Table D Pump Flanges
BS 10 Table D Orifice Flanges
BS 10 Table D Stub End Flanges
BS 10 Table D Raised Face Weld Neck Flanges
BS 10 Table D Slip On Flanges
BS 10 Table D Weld Neck Flange
BS 10 Table D Shower Rod Flanges
BS 10 Table D Sae Flanges
BS 10 Table D Ring Flanges
BS 10 Table D RTJ Flanges
BS 10 Table D Screwed Flanges
BS 10 Table D Clad Flanges
View Bs 10 Flange Dimensions In Mm, Pressure Rating and Weight
India’s Largest Manufacturer of Bs 10 Table Flanges in mumbai, India, check Bs 10 Flange Weight, Sizes and Chart

 

Buttweld Fittings