ASTM A105 Flange Manufacturers Supplier, Stockists

Forged carbon steel piping components for ambient temperature as well as high temperature applications in pressure systems are covered by the standard for the Carbon Steel of A105 Flanges specification. Flange astm a105 asme b16.5 fittings, valves, and other comparable ordered components are included in these pressure systems.

Table of Content

Specifications of ASTM A105 Carbon Steel Flange
ASTM A105 Flange Price List
Manufacturing Standards Of ASTM A105 Carbon Steel Flange
Types of ASTM A105 Carbon Steel Flanges
Carbon Steel A105 Flange Pressure Ratings
Size Chart Of Carbon Steel A105 Flange
Carbon Steel A105 Flange Dimensions
A105 Flange Weight
ASTM A105 Flange Other Types
Grade A105 Carbon Steel Flanges Chemical Composition
Carbon Steel A105 Flange Physical Properties
Carbon Steel A105 Flange Mechanical Properties
Carbon Steel of A105 Flanges Application

Directly From Carbon Steel A105 Plate Flanges Manufacturers In Mumbai, A105 of Carbon Steel Flanges Manufacturers, Ready Stock Of A105 Carbon Steel Threaded Flanges In India

is a low carbon, silicon, and manganese steel grade. The AISI 1330 specification and the alloy used to make a105 carbon steel flanges are similar, but the AISI 1330 specification has a higher manganese content than the alloy used to make a105 carbon steel flanges.

Except for flanges above Class 300 and a105 pipe flanges of particular design (where the design pressure or design temperature for the carbon steel a105 reduction flange are unknown), heat treating astm a105n weld neck flanges is not a requirement. The same is true for products that are over 4" NPS and above Class 300. Forged carbon steel astm a105 must undergo processes like annealing, normalizing, normalising and temper, normalising and quenching, and tempering when the a105 carbon steel plate flanges need heat treatment.

Forgings for this specification astm a105 150 flange dimensions are limited up to 10,000 lbs. The astm a105 flange material alloy is forged at between 1,700 °F and 2,200 °F, followed by quenching and tempering the astm a105 class 300 flange.Forged parts of the carbon steel grade a105 are first allowed to cool down to a temperature below 1,000 °F. After cooling down the astm a105 flange , it is then reheating to a temperature range between 1,550 °F and 1,700 °F. Once the blind of carbon steel a105 flange has been reheated, the alloy is cooled slowly in the furnace.

Check Carbon Steel A105 Socket Weld Neck Reducing Flange Price List 2019, Purchase From Blind of Carbon Steel A105 Flange Exporter In Mumbai

Blind of Carbon Steel A105 Flange

A105 of Carbon Steel Flanges Manufacturers

Carbon Steel of A105 Flanges

We Offer A Wide Variety Of Carbon Steel A105 Reducing Flanges, Astm A105 Class 300 Flanges, And Astm A105n Weld Neck Flanges At Discounted Prices In India.

The astm a105 slip on flange carbon steel forging has comparable machinability to other low alloy steel grades. The carbon steel of a105 flanges specification does not mention cold working in addition to machining. The astm a105 blind flange must go through tests like the tensile test and hardness test in order to verify the strength and ductility of the material. The astm a105 sorf flange specimen, which is then removed from the sample that underwent heat treatment together with the finished item, is subjected to these tests.

We are one of the leading a105 flange manufacturers.

Specifications of ASTM A105 Carbon Steel Flange

Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175
Specifications	A105 Carbon Steel Flanges
ASME B16.5 A105 Carbon Steel Flanges size range	1/2" (15 NB) to 48" (1200NB) DN10~DN5000
A105 Carbon Steel Flanges Standards	ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges.
A105 Carbon Steel Flanges Standard DIN	6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
A105 Carbon Steel Flanges Standard ANSI	Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
A105 Carbon Steel Flanges Standard UNI	6Bar 10Bar 16Bar 25Bar 40Bar
A105 Carbon Steel Flanges Standard JIS	5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
A105 Carbon Steel Flanges Standard EN	6Bar 10Bar 16Bar 25Bar 40Bar
Main Types	Forged / Threaded / Screwed / Plate
Flange supporting material	Gasket, Ring Joint, Flange Bolts
A105 Carbon Steel Pipe Flanges Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
Production technique	Forged, Heat treated and machined
Connect Type/ Flange Face Type	Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove
Most common types of A105 Carbon Steel Flanges	Lap Joint Ring Flange (LJRF), A105 Carbon Steel Flanges Socket Weld Ring Flange (SWRF), A105 Carbon Steel Flanges Slip-On Ring Flange (SORF), A105 Carbon Steel Flanges Blind Ring Flange (BLRF), A105 Carbon Steel Flanges Threaded Ring Flange, A105 Carbon Steel Flanges Ring Type Joint Flange (RTJF), A105 Carbon Steel Flanges Weld Neck Ring Flange (WNRF), A105 Carbon Steel Flanges
Special design	As per your drawing AS, ANSI, BS, DIN and JIS 15 NB (1/2") to 200 NB (8") Equal and Reducing Configurations A105 Carbon Steel Flanges Threaded Flanges, Socketweld Flanges, Slip-On Flanges, Blind Flanges, Weld Neck Flanges
Test	Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Origin	Indian / West Europe / Japan / USA / Korean
Equipment	Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Specialized manufacturer of	Rtj Flanges Pn16 Flanges DIN 2566 pn16 DIN 2566 en 1092 1 DIN 2566 pn10 A105 Carbon Steel Lap Joint Flanges A105 Carbon Steel Loose Flanges A105 Carbon Steel Orifice Flanges A105 Carbon Steel AS 4087 Water Flanges A105 Carbon Steel Weld Neck Flanges A105 Carbon Steel Flanges A105 Carbon Steel Slip-On Flanges A105 Carbon Steel Socketweld Flanges A105 Carbon Steel Plate Flanges A105 Carbon Steel Large Diameter Flanges A105 Carbon Steel Sorf Flanges A105 Carbon Steel Blind Flanges A105 Carbon Steel Table Flanges
A105 Carbon Steel Flanges Standard	ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange, ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE, BS Flange, EN Flange, API 6A Flange etc B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) Any other specilised flanges DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
Key markets and industries for A105 Carbon Steel Flanges	Nuclear power (mostly seamless). Petrochemicals and acids. Bitumen upgraders. Heavy oil refineries.
Export to	Ukraine, Singapore, Brazil, Spain, Egypt, Ireland, Indonesia, Iran, Peru, Oman, Dubai, USA, India, Thailand, Canada, Korea, Saudi Arabia, etc
A105 Carbon Steel Flanges Application	To Connect Pipe & Tubes in Petroleum, Power, Gas, Metallurgy, Shipbuilding Construction, Chemical etc

Manufacturing Standards Of ASTM A105 Carbon Steel Flange

Types of ASTM A105 Carbon Steel Flanges

ASME SA105 CS Plate Flange

ASTM A105 Carbon Steel Ring Type Joint Flange

Carbon Steel A105 Tongue & Groove Flange

ASTM A105 Carbon Tongue & Groove Flanges

Carbon Steel A105 Reducing Flange

CS A105 Ring Spacer

ASTM A105 High Hub Blind Flange

CS A105 Forged Flange

ASME SA105 Bleed Ring Flange

Carbon Steel ASME SA105 Raised Face Flange

ASTM A105 Male & Female Flanges

ASTM A105 Carbon Steel Weldoflange

ASTM A105 Carbon Steel Puddle Flanges

CS ASME SA105 Orifice Flange

CS A105 Square Flange

Carbon Steel A105 Nipo Flange

ASTM A105 Spade Flange

Carbon Steel A105 Slip On Flange

ASTM A105 Socket Weld Flange

A105 Carbon Steel Blind Flange

Carbon Steel A105 Weld Neck Flange

ASME SA105 Carbon Steel Threaded / Screwed Flange

CS A105 Lap Joint Flange

A105 CS Long Weld Neck Flange

Carbon Steel A105 Spectacle Blind Flange

Carbon Steel A105 Flange Pressure Ratings

TEMP °C	150	300	400	600	900	1500	2500
-29 TO 38	19.6	51.1	68.1	102.1	153.2	255.3	425.5
50	19.2	50.1	66.8	100.2	150.4	250.6	417.7
100	17.7	46.6	62.1	93.2	139.8	233	388.3
150	15.8	45.1	60.1	90.2	135.2	225.4	375.6
200	13.8	43.8	58.4	87.6	131.4	219	365
250	12.1	41.9	55.9	83.9	125.8	209.7	349.5
300	10.2	39.8	53.1	79.6	119.5	199.1	331.8
325	9.3	38.7	51.6	77.4	116.1	193.6	322.6
350	8.4	37.6	50.1	75.1	112.7	187.8	313
375	7.4	36.4	48.5	72.7	109.1	181.8	303.1
400	6.5	34.7	46.3	69.4	104.2	173.6	289.3
425	5.5	28.8	38.4	57.5	86.3	143.8	239.7
450	4.6	23	30.7	46	69	115	191.7
475	3.7	17.4	23.2	34.9	52.3	87.2	145.3
500	2.8	11.8	15.7	23.5	35.3	58.8	97.9
538	1.4	5.9	7.9	11.8	17.7	29.5	49.2
TEMP °C	150	300	400	600	900	1500	2500

Size Chart Of Carbon Steel A105 Flange

Carbon Steel A105 Flange Dimensions

Click on below links for A105 Carbon Steel Flanges dimensions

A105 Carbon Steel Pipe Flange Dimensions

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)	ASME B1.20.1, Pipe Threads, General Purpose ASME B16.1, Cast Iron Flanges and Flanged Fittings Classes 25, 125 and 250 ASME B16.5, Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 ASME B16.11, Forged Fittings, Socket Welding and Threaded ASME B16.25, Buttwelding Ends ASME B16.36, Orifice Flanges ASME B16.47, Large Diameter Steel Flanges NPS 26 Through NPS 60 ASME B31.1, Power Piping ASME B31.3, Process Piping ASME B46.1, Surface Texture (Surface Roughness, Waviness, and Lay)

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

ASME B1.20.1, Pipe Threads, General Purpose
ASME B16.1, Cast Iron Flanges and Flanged Fittings Classes 25, 125 and 250
ASME B16.5, Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24
ASME B16.11, Forged Fittings, Socket Welding and Threaded
ASME B16.25, Buttwelding Ends
ASME B16.36, Orifice Flanges
ASME B16.47, Large Diameter Steel Flanges NPS 26 Through NPS 60
ASME B31.1, Power Piping
ASME B31.3, Process Piping
ASME B46.1, Surface Texture (Surface Roughness, Waviness, and Lay)

A105 Flange Weight

15mm (1/2") A105 Carbon Steel Flanges Weight Chart

Standard	Class	Diameter	Bolt Circle Diameter	Number of Bolts	Bolt Size	Diameter of Bolt Hole
AS4087	PN14	95	67	4	M12	14
AS 2129 Flange	Table C	95	67	4	13	14
	Table D	95	67	4	13	14
	Table E	95	67	4	13	14
	Table F	95	67	4	13	14
	Table H	114	83	4	16	17
	Table J	114	83	4	16	17
ASTM B16.5	ASTM 150	89	60	4	13	16
	ASTM 300	95	67	4	13	16
	ASTM 600	95	67	4	13	16
	ASTM 900	121	83	4	19	22
	ASTM 1500	121	83	4	19	22
ISO 7005 (DIN) Flange	PN6	80	55	4	M10	11
	PN10	95	65	4	M12	14
	PN16	95	65	4	M12	14
	PN20	90	60.5	4	M14	16
	PN25	95	65	4	M12	14
	PN40	95	65	4	M12	14

ASTM A105 Flange Other Types

A105 CS Screwed Flange Exporter	Carbon Steel A105 Split Flange Stockist
ASME SA105 SORF Flange	Carbon Steel A105 Weld Neck Flanges
DIN 2605 CS SAE Flanges	Carbon Steel Reducing Flange Wholesaler
Blind of Carbon Steel A105 Flange	ASTM A105 Carbon Steel Exhaust Flange
ASME SA105 Slip on Flange	ASTM A105 Ring Type Joint Flange
JIS B2220 CS Puddle Flange	Carbon Steel A105 Galvanized Flanges

ASTM A105 Carbon Steel Pipe Flanges	A105 Carbon Steel Raised Face Slip On Flanges
ASTM A105 Carbon Steel Plate Flanges	A105 Carbon Steel Pipe Flanges
ASTM A105 Carbon Steel Backing Flanges	A105 Carbon Steel Exhaust Flanges
ASTM A105 Carbon Steel Tube Flanges	ASME S A105 Carbon Steel Header Flanges
ASTM A105 Carbon Steel Stub End Flanges	A105 Carbon Steel Raised Face Weld Neck Flanges
ASTM A105 Carbon Steel Exhaust Flanges	ASME S A105 Carbon Steel Slip On Plate Flanges
ASTM A105 Carbon Steel Header Flanges	A105 Carbon Steel Slip On Flanges
ASTM A105 Carbon Steel Shower Rod Flanges	ASTM A105 Carbon Steel Sae Flanges
ASTM A105 Carbon Steel Socket Weld Flanges	ASTM A105 Carbon Steel WNRF Flanges
ASTM A105 Carbon Steel Sbc Header Flanges	A105 Carbon Steel Raised Face Blind Flanges
ASTM A105 Carbon Steel Split Flanges	ASME S A105 Carbon Steel Blind Flanges
ASTM A105 Carbon Steel Slip-On Pipe Flanges	A105 Carbon Steel Blind Flanges
ASTM A105 Carbon Steel Slip On Flanges	A105 Carbon Steel Weld Neck Flanges
ASTM A105 Carbon Steel Screwed Flanges	ASTM A105 Carbon Steel Clad Flanges
ASTM A105 Carbon Steel Square Flanges	ASTM A105 Carbon Steel Ansi Flanges
Ansi 150 ASTM A105 Carbon Steel Flanges	ASTM A105 Carbon Steel BLRF Flanges
ASTM A105 Carbon Steel Blank Flanges	A105 Carbon Steel Orifice Flanges
ASTM A105 Carbon Steel Bsp Flanges	ASME S A105 Carbon Steel Orifice Flanges
ASTM A105 Carbon Steel Companion Flanges	A105 Carbon Steel Orifice Flanges
ASTM A105 Carbon Steel Class 150 Flanges	ASTM A105 Carbon Steel Duct Flanges
ASTM A105 Carbon Steel Cover Flanges	A105 Carbon Steel Orifice Flanges
Large Diameter ASTM A105 Carbon Steel Flanges	ASTM A105 Carbon Steel SWRF Flanges
Table E ASTM A105 Carbon Steel Flanges	ASME B16.5 A105 Carbon Steel Socket weld Flanges
ASTM A105 Carbon Steel Floor Flanges	A105 Carbon Steel Flanges
ASTM A105 Carbon Steel Forged Flanges	ASME S A105 Carbon Steel Flanges
Gaskets For ASTM A105 Carbon Steel Flanges	A105 Carbon Steel Flanges
ASTM A105 Carbon Steel Handrail Flanges	ASTM A105 Carbon Steel fastenersonline Flanges
High Pressure ASTM A105 Carbon Steel Flanges	ASTM A105 Carbon Steel Flanges
ASTM A105 Carbon Steel Lap Joint Flanges	ASTM A105 Carbon Steel Flanges
Custom ASTM A105 Carbon Steel Flanges	A105 Carbon Steel Socket weld Flanges
Class 600 ASTM A105 Carbon Steel Flanges	ASME S A105 Carbon Steel Socket weld Flanges
ASTM A105 Carbon Steel Din Flanges	A105 Carbon Steel Socket weld Flanges
ASTM A105 Carbon Steel Long Weld Neck Flanges	A105 Carbon Steel Long weld Neck Flanges
ASTM A105 Carbon Steel Metric Flanges	ASME S A105 Carbon Steel Long weld Neck Flanges
ASTM A105 Carbon Steel Muffler Flanges	A105 Carbon Steel Long weld Neck Flanges
ASTM A105 Carbon Steel Pump Flanges	ASTM A105 Carbon Steel Orifice Flanges
ASTM A105 Carbon Steel Pressed Flanges	A105 Carbon Steel Ring Type Joint Flanges
ASTM A105 Carbon Steel Puddle Flanges	ASME S A105 Carbon Steel Ring Type Joint Flanges
ASTM A105 Carbon Steel Pad Flanges	A105 Carbon Steel RTJ Flanges
ASTM A105 Carbon Steel Reducing Flanges	A105 Carbon Steel RTJ Flanges
ASTM A105 Carbon Steel Raised Face Flanges	ASTM A105 Carbon Steel RTJ Flanges
ASTM A105 Carbon Steel Ring Flanges	BS4504 A105 Carbon Steel RTJ Flanges
ASTM A105 Carbon Steel Reducing Flanges	A105 Carbon Steel Reducing Flanges
ASTM A105 Carbon Steel Wnrf Flanges	ASME S A105 Carbon Steel Reducing Flanges
ASTM A105 Carbon Steel Split Flanges	A105 Carbon Steel Reducing Flanges
ASTM A105 Carbon Steel Turbo Flanges	ASTM A105 Carbon Steel Forged Flanges
ASTM A105 Carbon Steel Vacuum Flanges	ASTM A105 Carbon Steel Reducing Flanges
ASTM A105 Carbon Steel Reducing Flanges	A105 Carbon Steel Forged Flanges

Grade A105 Carbon Steel Flanges Chemical Composition

ELEMENT	COMPOSITION, %
Carbon	0.35 max
Manganese	0.60-1.05
Phosphorus	0.035 max
Sulfur	0.040 max
Silicon	0.10-0.35
Copper	0.40 max (1)
Nickel	0.40 max (1)
Chromium	0.30 max (1-2)
Molybdenum	0.12 max (1-2)
Vanadium	0.08 max

Carbon Steel A105 Flange Physical Properties

Density (lb / cu. in.)	0.284
Specific Gravity	7.9
Specific Heat (Btu/lb/Deg F - [32-212 Deg F])	0.107
Melting Point (Deg F)	2740
Thermal Conductivity	360
Mean Coeff Thermal Expansion	6.7
Modulus of Elasticity Tension	30
Modulus of Elasticity Torsion	11

Carbon Steel A105 Flange Mechanical Properties

Mechanical Properties	Requirements
Tensile strength,min,psi [MPa]	70000 [485]
Yield strength,min,psi [MPa]	36000 [250]
Elongation, min, %	30
Reductionofarea,min,%	30
Hardness,HB,max	187

ASTM A105 Carbon Steel Flange Application

JIS B2220 A105 WNRF Flanges uses in Heat Exchangers
JIS CS A105 Socket Weld Flanges uses in Spiral Welded tube for burner pipes and flues
ASME SA105 CS Forged Flanges uses in Heating Element Tubing
ANSI B16.5 Pipe Flanges uses in High Temperature Mineral Processing
ASTM A105 Carbon Steel Flanges uses in Paper Mills
ASTM A105 Blind Pipe Flanges uses in Chemical Industries
SA105 Carbon Steel Weld Neck Flanges uses in Expansion joints
ASME SA105 Carbon Steel Slip On Flanges uses in Bellows

Check Sizes in Stock

Flange Schedule/Class	Pipe Size - Pipe Flanges	Flange Connection Type	Flange Material	Max. Pressure
ASME B16.5 Class 150	1/2"	FNPT	A105 Carbon Steel Flanges	150 psi
ASME B16.5 Class 150	1/2"	Socket Weld	A105 Carbon Steel Flanges	275 psi
ASME B16.5 Class 150	1/2"	Welded	A105 Carbon Steel Flanges	150 psi
ASME B16.5 Class 150	3/4"	FNPT	A105 Carbon Steel Flanges	150 psi
ASME B16.5 Class 150	3/4"	Socket Weld	A105 Carbon Steel Flanges	275 psi
ASME B16.5 Class 150	1-1/4"	Socket Weld	A105 Carbon Steel Flanges	275 psi
ASME B16.5 Class 150	1-1/2"	Socket Weld	A105 Carbon Steel Flanges	275 psi
ASME B16.5 Class 150	2"	FNPT	A105 Carbon Steel Flanges	150 psi
ASME B16.5 Class 150	2"	Socket Weld	A105 Carbon Steel Flanges	275 psi
ASME B16.5 Class 150	2-1/2"	Socket Weld	A105 Carbon Steel Flanges	275 psi
ASME B16.5 Class 150	3"	Socket Weld	A105 Carbon Steel Flanges	275 psi
ASME B16.5 Class 150	4"	FNPT	A105 Carbon Steel Flanges	150 psi
ASME B16.5 Class 150	4"	Socket Weld	A105 Carbon Steel Flanges	275 psi
ASME B16.5 Class 300	1/2"	Slip On	A105 Carbon Steel Flanges	720 psi
ASME B16.5 Class 300	1/2"	Slip On	A105 Carbon Steel Flanges	720 psi
ASME B16.5 Class 300	1"	Slip On	A105 Carbon Steel Flanges	720 psi
ASME B16.5 Class 300	1"	Slip On	A105 Carbon Steel Flanges	720 psi
ASME B16.5 Class 300	1-1/4"	FNPT	A105 Carbon Steel Flanges	720 psi
ASME B16.5 Class 300	1-1/4"	Slip On	A105 Carbon Steel Flanges	720 psi
ASME B16.5 Class 300	1-1/2"	Slip On	A105 Carbon Steel Flanges	720 psi
ASME B16.5 Class 300	1-1/2"	Slip On	A105 Carbon Steel Flanges	720 psi
ASME B16.5 Class 300	2"	Slip On	A105 Carbon Steel Flanges	720 psi
ASME B16.5 Class 300	2"	Slip On	A105 Carbon Steel Flanges	720 psi
ASME B16.5 Class 300	2-1/2"	Slip On	A105 Carbon Steel Flanges	720 psi
ASME B16.5 Class 300	2-1/2"	Slip On	A105 Carbon Steel Flanges	720 psi
ASME B16.5 Class 300	3"	Slip On	A105 Carbon Steel Flanges	720 psi
ASME B16.5 Class 300	3"	Slip On	A105 Carbon Steel Flanges	720 psi
ASME B16.5 Class 300	4"	Slip On	A105 Carbon Steel Flanges	720 psi
ASME B16.5 Class 300	4"	Slip On	A105 Carbon Steel Flanges	720 psi

A105 Carbon Steel Forged and Plate Flanges

A105 Carbon Steel Flanges
A105 Carbon Steel Blind Flanges	A105 Carbon Steel Reducing Flanges
A105 Carbon Steel Lap Joint Flanges	A105 Carbon Steel Plate Flanges
A105 Carbon Steel Orifice Flanges	A105 Carbon Steel Forged Flanges
A105 Carbon Steel Slip-On Flanges	A105 Carbon Steel Flanges
A105 Carbon Steel Weld Neck Flanges	A105 Carbon Steel Socket Weld Flanges
A105 Carbon Steel Ring Type Joint Flanges

View Astm A105 150 Flange Dimensions, Pressure Rating, Specification, Weight, and ASTM A105 Flange View and compare Astm A105 Weld Neck Flange Dimensions and Equivalent before purchasing Astm A105 Slip On Flange in India.