ASTM A350 Lf2 Flanges Supplier, Stockists
Forged fittings, valves, and flanges made of carbon and low-alloy steel are covered by the ASTM A350 Standard Specification. These ltcs astm a350 gr lf2 cl1 components must undergo notch toughness testing because they are primarily intended for usage in low temperature situations. The pipe flanges from LTCS are produced in accordance with either the ASME or API dimensional specifications. The hot-forging technique can be used to create the forged material ASTM A350 Gr. Lf2 from ingots, billets, blooms, slabs, or bars.
Table of Content
- ASTM A350 LF2 Flanges Price List India
- Manufacturing Standards Of Carbon Steel ASTM A350 LF2 Flanges
- Specifications of Carbon Steel ASTM A350 LF2 Flanges
- Size Chart Of Carbon Steel A350 LF2 Flange
- Pressure Ratings of CS A350 LF2 Flanges
- Dimensions of Carbon Steel ASTM A350 LF2 Flange
- Carbon Steel of A350 LF2 Flanges Types
- Weight of A350 Lf2 Flanges
- Grade A350 LF2 Carbon Steel Flanges Chemical Composition
- Carbon Steel ASTM A350 LF2 Flanges Thermal Expantion
- CS ASTM A350 LF2 Flanges Physical Properties
- Carbon Steel ASTM A350 LF2 Flanges Mechanical Properties
- Application of Carbon Steel ASTM A350 LF2 Flanges
- Types of ASTM A350 LF2 Flange Other
Buy Sa350 Gr. Lf2 Forged Flange From LTCS Pipe Flanges Exporter In Mumbai. Check A350 Lf2 Cl1 Flanges Price List 2019.
The comparable steel to ASTM A350 LF2 must be fine-grained and thoroughly killed. The SA-350 LF2 flange is available in a number of grades and classes, including Grades LF1, LF2, LF3, LF5, LF6, LF9, and LF787, as well as Classes 1, 2, and 3. The astm a350 lf2 flanges manufacturers often ultrasonically test all of the forgings they deliver.
We are among the top suppliers and distributors of astm a350 lf2 flanges and carbon steel of a350 lf2 flanges. The forging must be allowed to drop significantly below its transformation range after hot working and before reheating the alloy intended for heat treatment, according to the requirements of cs astm a350 gr lf2. Apart from Grade LF787, forgings of grades like the ASTM A350 LF2 Class 1 and Class 2 must be delivered in a normalised condition. The a350 lf2 weld neck flanges can also be delivered in one of two conditions: normalised and tempered or quenched and tempered.
All astm a350 gr. lf2 class 1 quenched forgings must be tempered at a minimum temperature of 1100 °F. The SA 350 LF2 Class 1 must then be maintained at that temperature for at least 30 minutes for every inch of the maximum thickness, but no less than 30 minutes. According to AWS A 5.1, the weld metal for Grade LF1 and forged A350 LF2 plate flanges must be placed using carbon steel electrodes such as E 7015, E 7016, or E 7018. Similar to this, in accordance with AWS 5.5, the weld metal for a350 gr lf2 flange must be deposited using low alloy grade steel electrodes like E 7015-A1, E 7016-A1, or E 7018-A1.
Buy Directly From Astm A350 Lf2 Class 1 And Class 2 Flange Manufacturers In Mumbai, Ready Stock Of High Quality A350 Lf2 of Blind Flange, A350 Lf2 Weldneck Flange, and A350 Lf2 Plate Flanges
Carbon Steel of A350 Lf2 Flanges
A350 Lf2 of Blind Flange
Astm A350 Lf2 Flanges
View Astm A350 Lf2 Material Specification, Equivalent, and Dimensions for A350 Lf2 Flange.
The material astm a350 gr lf2 is typically a general carbon steel grade that is supplied in either a quenched and tempered or a normalised, normalised, and tempered form. The moderate strength and impact toughness of the a350 grade lf2 are its defining characteristics. As a result, a350 grade lf2 cl1 is widely employed in the production of flanges and fittings. In applications where corrosion resistance is not crucial, such as in cold temperature service, the a350 gr lf2 cl 1 is also utilised.
- SABS / SANS 1123 Flanges
- GOST 12820 80 Flanges
- API Flanges
- AWWA C207 Flanges
- JIS B2220 Flange
- MSS SP-44 Flange
- EN 1092-1 Flange
- ISO Flanges
- Australian Flanges
- Korean FLANGE
- BS 4504 Flanges
- BS 10 Flanges
| Specifications | A350 LF2 Carbon Steel Flanges |
|---|---|
| ASME B16.5 A350 LF2 Carbon Steel Flanges size range | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
| A350 LF2 Carbon Steel Flanges Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges. |
| A350 LF2 Carbon Steel Flanges Standard DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| A350 LF2 Carbon Steel Flanges Standard ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| A350 LF2 Carbon Steel Flanges Standard UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| A350 LF2 Carbon Steel Flanges Standard JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
| A350 LF2 Carbon Steel Flanges Standard EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Main Types | Forged / Threaded / Screwed / Plate |
| Flange supporting material | Gasket, Ring Joint, Flange Bolts |
| A350 LF2 Carbon Steel Pipe Flanges Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Production technique |
|
| Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove |
| Most common types of A350 LF2 Carbon Steel Flanges |
|
| Special design | As per your drawing AS, ANSI, BS, DIN and JIS A350 LF2 Carbon Steel Flanges Threaded Flanges, Socketweld Flanges, Slip-On Flanges, Blind Flanges, Weld Neck Flanges |
| Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
| Origin | Indian / West Europe / Japan / USA / Korean |
| Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
| Specialized manufacturer of |
|
| A350 LF2 Carbon Steel Flanges Standard | ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange, ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE,
|
| Key markets and industries for A350 LF2 Carbon Steel Flanges |
|
| Export to | Ukraine, Singapore, Brazil, Spain, Egypt, Ireland, Indonesia, Iran, Peru, Oman, Dubai, USA, India, Thailand, Canada, Korea, Saudi Arabia, etc |
| A350 LF2 Carbon Steel Flanges Application |
|
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
TEMP °C |
150 |
300 |
400 |
600 |
900 |
1500 |
2500 |
-29 TO 38 |
19.6 |
51.1 |
68.1 |
102.1 |
153.2 |
255.3 |
425.5 |
50 |
19.2 |
50.1 |
66.8 |
100.2 |
150.4 |
250.6 |
417.7 |
100 |
17.7 |
46.6 |
62.1 |
93.2 |
139.8 |
233 |
388.3 |
150 |
15.8 |
45.1 |
60.1 |
90.2 |
135.2 |
225.4 |
375.6 |
200 |
13.8 |
43.8 |
58.4 |
87.6 |
131.4 |
219 |
365 |
250 |
12.1 |
41.9 |
55.9 |
83.9 |
125.8 |
209.7 |
349.5 |
300 |
10.2 |
39.8 |
53.1 |
79.6 |
119.5 |
199.1 |
331.8 |
325 |
9.3 |
38.7 |
51.6 |
77.4 |
116.1 |
193.6 |
322.6 |
350 |
8.4 |
37.6 |
50.1 |
75.1 |
112.7 |
187.8 |
313 |
375 |
7.4 |
36.4 |
48.5 |
72.7 |
109.1 |
181.8 |
303.1 |
400 |
6.5 |
34.7 |
46.3 |
69.4 |
104.2 |
173.6 |
289.3 |
425 |
5.5 |
28.8 |
38.4 |
57.5 |
86.3 |
143.8 |
239.7 |
450 |
4.6 |
23 |
30.7 |
46 |
69 |
115 |
191.7 |
475 |
3.7 |
17.4 |
23.2 |
34.9 |
52.3 |
87.2 |
145.3 |
500 |
2.8 |
11.8 |
15.7 |
23.5 |
35.3 |
58.8 |
97.9 |
538 |
1.4 |
5.9 |
7.9 |
11.8 |
17.7 |
29.5 |
49.2 |
TEMP °C |
150 |
300 |
400 |
600 |
900 |
1500 |
2500 |
Click on below links for A350 LF2 Carbon Steel Flanges dimensions
- 150 LB Flange Dimensions
- 300 LB Flange Dimensions
- 600 LB Flange Dimensions
- 900 LB Flange Dimensions
- 1500 LB Flange Dimensions
- 2500 LB Flange Dimensions
- DIN 2527 Flanges
- DIN 2573 Flanges
- DIN 2576 Flanges
- DIN 2632 Flanges
- DIN 2633 Flanges
- DIN 2635 Flanges
- DIN 2642 Flanges
- ANSI B16.47 Flange
A350 LF2 Carbon Steel Pipe Flange Dimensions
| AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) |
|
|---|
15mm (1/2") A350 LF2 Carbon Steel Flanges Weight Chart
Standard |
Class |
Diameter |
Bolt Circle Diameter |
Number of Bolts |
Bolt Size |
Diameter of Bolt Hole |
|---|---|---|---|---|---|---|
AS4087 |
PN14 |
95 |
67 |
4 |
M12 |
14 |
AS 2129 Flange |
Table C |
95 |
67 |
4 |
13 |
14 |
Table D |
95 |
67 |
4 |
13 |
14 |
|
Table E |
95 |
67 |
4 |
13 |
14 |
|
Table F |
95 |
67 |
4 |
13 |
14 |
|
Table H |
114 |
83 |
4 |
16 |
17 |
|
Table J |
114 |
83 |
4 |
16 |
17 |
|
ASTM B16.5 |
ASTM 150 |
89 |
60 |
4 |
13 |
16 |
ASTM 300 |
95 |
67 |
4 |
13 |
16 |
|
ASTM 600 |
95 |
67 |
4 |
13 |
16 |
|
ASTM 900 |
121 |
83 |
4 |
19 |
22 |
|
ASTM 1500 |
121 |
83 |
4 |
19 |
22 |
|
ISO 7005 (DIN) Flange |
PN6 |
80 |
55 |
4 |
M10 |
11 |
PN10 |
95 |
65 |
4 |
M12 |
14 |
|
PN16 |
95 |
65 |
4 |
M12 |
14 |
|
PN20 |
90 |
60.5 |
4 |
M14 |
16 |
|
PN25 |
95 |
65 |
4 |
M12 |
14 |
|
PN40 |
95 |
65 |
4 |
M12 |
14 |
C% |
Mn% |
Si% |
S% |
P% |
Cr% |
Ni% |
0.30 max |
0.6/1.35 |
.15/.30 |
.040 max |
.035 max |
0.30 max |
0.40 max |
(1) The sum of copper, nickel, chromium, molybdenum and vanadium shall not exceed 1.00%.
(2) The sum of chromium and molybdenum shall not exceed 0.32%.
Note:
For each reduction of 0.01% below the specified carbon maximum (0.35%), an increase of 0.06% manganese above the specified maximum (1.05%) will be permitted up to a maximum of 1.35%.
7nbsp;
Properties |
Metric |
Imperial |
|---|---|---|
Thermal expansion co-efficient (@0-100°C/32-212°F) |
10.4 µm/m°C |
5.78 µin/in°F |
Thermal conductivity |
21.6 W/mK |
150 BTU in/hr.ft².°F |
- Class 1 HB: after heat treatment
- Yield Strength: > 250 MPa
- Tensile Strength: 485 - 655 MPa
- Elongation: > 22 %
- Hardness HB: < 197
- Reduction of area: > 30 %
- Impact energy KV -50°F [-45°С]: > 16 J
PROPERTIES |
Imperial |
|---|---|
TS Min psi (Mpa) |
70,000 (485) |
YS Min psi (Mpa) |
36,000 (250) |
EL (2″ Min) |
22% |
RA Min |
30% |
Hardness, Bhn |
Max 197 |
-50ºF Charpy |
Min Impact |
Energy F t/Lb (J):- |
|
Set of 3 Specimen* |
15 (20) |
For One Specimen |
12 (16) |
- ASME SA350 LF2 CS Forged Flanges uses in Heating Element Tubing
- ASTM A350 LF2 Pipe Flanges uses in High Temperature Mineral Processing
- JIS CS ASTM A350 LF2 Socket Weld Flanges uses in Spiral Welded tube for burner pipes and flues
- SA350 LF2 Carbon Steel Weld Neck Flanges uses in Expansion joints
- ASTM A350 LF2 Carbon Steel Flangess uses in Paper Mills
- JIS B2220 A350 LF2 WNRF Flanges uses in Heat Exchangers
- ASME SA350 LF2 Carbon Steel Slip On Flanges uses in Bellows
- ASTM A350 LF2 Blind Pipe Flanges uses in Chemical Industries
ASTM A350 LF2 CS Screwed Flange Exporter |
ASTM A350 LF2 Ring Type Joint Flange |
JIS B2220 ASTM A350 CS Puddle Flange |
ASTM A350 LF2 Carbon Steel Exhaust Flange |
ASME SA350 LF2 SORF Flange |
Carbon Steel A350 LF2 Weld Neck Flanges |
ASTM A350 LF2 of Blind Flange |
Carbon Steel LF2 Reducing Flanges Wholesaler |
ASME SA350 LF2 Slip on Flange |
Carbon Steel A350 LF2 Galvanized Flanges |
DIN 2605 ASTM A350 LF2 CS SAE Flanges |
Carbon Steel A350 LF2 Split Flange Stockist |
| ASTM A350 LF2 Carbon Steel Pipe Flanges | A350 LF2 Carbon Steel Raised Face Slip On Flanges |
| ASTM A350 LF2 Carbon Steel Plate Flanges | A350 LF2 Carbon Steel Pipe Flanges |
| ASTM A350 LF2 Carbon Steel Backing Flanges | A350 LF2 Carbon Steel Exhaust Flanges |
| ASTM A350 LF2 Carbon Steel Tube Flanges | ASME S A350 LF2 Carbon Steel Header Flanges |
| ASTM A350 LF2 Carbon Steel Stub End Flanges | A350 LF2 Carbon Steel Raised Face Weld Neck Flanges |
| ASTM A350 LF2 Carbon Steel Exhaust Flanges | ASME S A350 LF2 Carbon Steel Slip On Plate Flanges |
| ASTM A350 LF2 Carbon Steel Header Flanges | A350 LF2 Carbon Steel Slip On Flanges |
| ASTM A350 LF2 Carbon Steel Shower Rod Flanges | ASTM A350 LF2 Carbon Steel Sae Flanges |
| ASTM A350 LF2 Carbon Steel Socket Weld Flanges | ASTM A350 LF2 Carbon Steel WNRF Flanges |
| ASTM A350 LF2 Carbon Steel Sbc Header Flanges | A350 LF2 Carbon Steel Raised Face Blind Flanges |
| ASTM A350 LF2 Carbon Steel Split Flanges | ASME S A350 LF2 Carbon Steel Blind Flanges |
| ASTM A350 LF2 Carbon Steel Slip-On Pipe Flanges | A350 LF2 Carbon Steel Blind Flanges |
| ASTM A350 LF2 Carbon Steel Slip On Flanges | A350 LF2 Carbon Steel Weld Neck Flanges |
| ASTM A350 LF2 Carbon Steel Screwed Flanges | ASTM A350 LF2 Carbon Steel Clad Flanges |
| ASTM A350 LF2 Carbon Steel Square Flanges | ASTM A350 LF2 Carbon Steel Ansi Flanges |
| Ansi 150 ASTM A350 LF2 Carbon Steel Flanges | ASTM A350 LF2 Carbon Steel BLRF Flanges |
| ASTM A350 LF2 Carbon Steel Blank Flanges | A350 LF2 Carbon Steel Orifice Flanges |
| ASTM A350 LF2 Carbon Steel Bsp Flanges | ASME S A350 LF2 Carbon Steel Orifice Flanges |
| ASTM A350 LF2 Carbon Steel Companion Flanges | A350 LF2 Carbon Steel Orifice Flanges |
| ASTM A350 LF2 Carbon Steel Class 150 Flanges | ASTM A350 LF2 Carbon Steel Duct Flanges |
| ASTM A350 LF2 Carbon Steel Cover Flanges | A350 LF2 Carbon Steel Orifice Flanges |
| Large Diameter ASTM A350 LF2 Carbon Steel Flanges | ASTM A350 LF2 Carbon Steel SWRF Flanges |
| Table E ASTM A350 LF2 Carbon Steel Flanges | ASME B16.5 A350 LF2 Carbon Steel Socket weld Flanges |
| ASTM A350 LF2 Carbon Steel Floor Flanges | A350 LF2 Carbon Steel Flanges |
| ASTM A350 LF2 Carbon Steel Forged Flanges | ASME S A350 LF2 Carbon Steel Flanges |
| Gaskets For ASTM A350 LF2 Carbon Steel Flanges | A350 LF2 Carbon Steel Flanges |
| ASTM A350 LF2 Carbon Steel Handrail Flanges | ASTM A350 LF2 Carbon Steel fastenersonline Flanges |
| High Pressure ASTM A350 LF2 Carbon Steel Flanges | ASTM A350 LF2 Carbon Steel Flanges |
| ASTM A350 LF2 Carbon Steel Lap Joint Flanges | ASTM A350 LF2 Carbon Steel Flanges |
| Custom ASTM A350 LF2 Carbon Steel Flanges | A350 LF2 Carbon Steel Socket weld Flanges |
| Class 600 ASTM A350 LF2 Carbon Steel Flanges | ASME S A350 LF2 Carbon Steel Socket weld Flanges |
| ASTM A350 LF2 Carbon Steel Din Flanges | A350 LF2 Carbon Steel Socket weld Flanges |
| ASTM A350 LF2 Carbon Steel Long Weld Neck Flanges | A350 LF2 Carbon Steel Long weld Neck Flanges |
| ASTM A350 LF2 Carbon Steel Metric Flanges | ASME S A350 LF2 Carbon Steel Long weld Neck Flanges |
| ASTM A350 LF2 Carbon Steel Muffler Flanges | A350 LF2 Carbon Steel Long weld Neck Flanges |
| ASTM A350 LF2 Carbon Steel Pump Flanges | ASTM A350 LF2 Carbon Steel Orifice Flanges |
| ASTM A350 LF2 Carbon Steel Pressed Flanges | A350 LF2 Carbon Steel Ring Type Joint Flanges |
| ASTM A350 LF2 Carbon Steel Puddle Flanges | ASME S A350 LF2 Carbon Steel Ring Type Joint Flanges |
| ASTM A350 LF2 Carbon Steel Pad Flanges | A350 LF2 Carbon Steel RTJ Flanges |
| ASTM A350 LF2 Carbon Steel Reducing Flanges | A350 LF2 Carbon Steel RTJ Flanges |
| ASTM A350 LF2 Carbon Steel Raised Face Flanges | ASTM A350 LF2 Carbon Steel RTJ Flanges |
| ASTM A350 LF2 Carbon Steel Ring Flanges | BS4504 A350 LF2 Carbon Steel RTJ Flanges |
| ASTM A350 LF2 Carbon Steel Reducing Flanges | A350 LF2 Carbon Steel Reducing Flanges |
| ASTM A350 LF2 Carbon Steel Wnrf Flanges | ASME S A350 LF2 Carbon Steel Reducing Flanges |
| ASTM A350 LF2 Carbon Steel Split Flanges | A350 LF2 Carbon Steel Reducing Flanges |
| ASTM A350 LF2 Carbon Steel Turbo Flanges | ASTM A350 LF2 Carbon Steel Forged Flanges |
| ASTM A350 LF2 Carbon Steel Vacuum Flanges | ASTM A350 LF2 Carbon Steel Reducing Flanges |
| ASTM A350 LF2 Carbon Steel Reducing Flanges | A350 LF2 Carbon Steel Forged Flanges |
View Dimensions and Specifications
Flange Schedule/Class |
Pipe Size - Pipe Flanges |
Flange Connection Type |
Flange Material |
Max. Pressure |
|---|---|---|---|---|
ASME B16.5 Class 150 |
1/2" |
FNPT |
A350 LF2 Carbon Steel Flanges |
150 psi |
ASME B16.5 Class 150 |
1/2" |
Socket Weld |
A350 LF2 Carbon Steel Flanges |
275 psi |
ASME B16.5 Class 150 |
1/2" |
Welded |
A350 LF2 Carbon Steel Flanges |
150 psi |
ASME B16.5 Class 150 |
3/4" |
FNPT |
A350 LF2 Carbon Steel Flanges |
150 psi |
ASME B16.5 Class 150 |
3/4" |
Socket Weld |
A350 LF2 Carbon Steel Flanges |
275 psi |
ASME B16.5 Class 150 |
1-1/4" |
Socket Weld |
A350 LF2 Carbon Steel Flanges |
275 psi |
ASME B16.5 Class 150 |
1-1/2" |
Socket Weld |
A350 LF2 Carbon Steel Flanges |
275 psi |
ASME B16.5 Class 150 |
2" |
FNPT |
A350 LF2 Carbon Steel Flanges |
150 psi |
ASME B16.5 Class 150 |
2" |
Socket Weld |
A350 LF2 Carbon Steel Flanges |
275 psi |
ASME B16.5 Class 150 |
2-1/2" |
Socket Weld |
A350 LF2 Carbon Steel Flanges |
275 psi |
ASME B16.5 Class 150 |
3" |
Socket Weld |
A350 LF2 Carbon Steel Flanges |
275 psi |
ASME B16.5 Class 150 |
4" |
FNPT |
A350 LF2 Carbon Steel Flanges |
150 psi |
ASME B16.5 Class 150 |
4" |
Socket Weld |
A350 LF2 Carbon Steel Flanges |
275 psi |
ASME B16.5 Class 300 |
1/2" |
Slip On |
A350 LF2 Carbon Steel Flanges |
720 psi |
ASME B16.5 Class 300 |
1/2" |
Slip On |
A350 LF2 Carbon Steel Flanges |
720 psi |
ASME B16.5 Class 300 |
1" |
Slip On |
A350 LF2 Carbon Steel Flanges |
720 psi |
ASME B16.5 Class 300 |
1" |
Slip On |
A350 LF2 Carbon Steel Flanges |
720 psi |
ASME B16.5 Class 300 |
1-1/4" |
FNPT |
A350 LF2 Carbon Steel Flanges |
720 psi |
ASME B16.5 Class 300 |
1-1/4" |
Slip On |
A350 LF2 Carbon Steel Flanges |
720 psi |
ASME B16.5 Class 300 |
1-1/2" |
Slip On |
A350 LF2 Carbon Steel Flanges |
720 psi |
ASME B16.5 Class 300 |
1-1/2" |
Slip On |
A350 LF2 Carbon Steel Flanges |
720 psi |
ASME B16.5 Class 300 |
2" |
Slip On |
A350 LF2 Carbon Steel Flanges |
720 psi |
ASME B16.5 Class 300 |
2" |
Slip On |
A350 LF2 Carbon Steel Flanges |
720 psi |
ASME B16.5 Class 300 |
2-1/2" |
Slip On |
A350 LF2 Carbon Steel Flanges |
720 psi |
ASME B16.5 Class 300 |
2-1/2" |
Slip On |
A350 LF2 Carbon Steel Flanges |
720 psi |
ASME B16.5 Class 300 |
3" |
Slip On |
A350 LF2 Carbon Steel Flanges |
720 psi |
ASME B16.5 Class 300 |
3" |
Slip On |
A350 LF2 Carbon Steel Flanges |
720 psi |
ASME B16.5 Class 300 |
4" |
Slip On |
A350 LF2 Carbon Steel Flanges |
720 psi |
ASME B16.5 Class 300 |
4" |
Slip On |
A350 LF2 Carbon Steel Flanges |
720 psi |
A350 LF2 Carbon Steel Forged and Plate Flanges
| A350 LF2 Carbon Steel Flanges | |
| A350 LF2 Carbon Steel Blind Flanges | A350 LF2 Carbon Steel Reducing Flanges |
| A350 LF2 Carbon Steel Lap Joint Flanges | A350 LF2 Carbon Steel Plate Flanges |
| A350 LF2 Carbon Steel Orifice Flanges | A350 LF2 Carbon Steel Forged Flanges |
| A350 LF2 Carbon Steel Slip-On Flanges | A350 LF2 Carbon Steel Flanges |
| A350 LF2 Carbon Steel Weld Neck Flanges | A350 LF2 Carbon Steel Socket Weld Flanges |
| A350 LF2 Carbon Steel Ring Type Joint Flanges | |
Buy A350 Gr Lf2 Flange Price List, A350 Gr Lf2 Carbon Steel Flanges, A350 Gr Lf2 Reducing Flanges, A350 Gr Lf2 Plate Flanges, Sa-350 Gr Lf2 Flange at Factory Price in India. We offer a wide range of A350 Lf2 Reducing Flange Material, A350 Lf2 Killed Carbon Steel Flanges, and ASME SA 350 Gr lf2 cl1 Flanges at competitive rates in India.
