Astm A182 Alloy Steel F11 Flanges Manufacturers

The a182 Alloy Steel f11 flange is used in a variety of equipment, including valves, pressure vessels, heat exchangers, petrochemical processes, and oil and gas refineries, among other industries. Alloys that can endure high temperatures and pressures are in demand in these industries.

Table of Content

buy Wide invnetory of Astm A182 F11 Material, Astm A182 F11 Class 1 and Class 2 Pipe flanges at factory price from Astm A182 F11 Flanges manufacturers

Due to the fact that this grade of alloy tends to maintain its strong qualities, the Chromoly based a182 f11 alloy steel flanges are used in the aforementioned industries. The ability of the astm a182 f11 forged flange to tolerate high temperature applications is another crucial characteristic.

Chromoly-based astm a182 f11 materials are perfect for situations where corrosive fluids or gases must be transported or carried at high temperatures through piping systems. The fact that alloy steel a182 f11 socket weld flanges function well even in challenging conditions is a bonus. The toughness and hardenability of the alloy steel a182 f11 flanges are additional improved qualities. Chromium and molybdenum are among the components that make up the chemical composition of astm a182 f11.

The a182 f11 material equivalent flanges are given increased mechanical properties by the addition of these two alloys, including improved stiffness, strong creep strength, exceptional hardenability, good impact resistance, and robust wear resistance. simple to manufacture To create creep-resistant steel, molybdenum has long been a staple alloying component. Astm a182 f11 equivalent molybdenum alloyed steel can sustain temperatures as high as 530 °C.

Get free sample of Sa182 F11 Pipe Flanges, Alloy Steel F11 Slip On Flanges, ASTM A182 F11 Blind Flanges, Check Asme Sa182 F11 Class 2 flange Price List 2019

Alloy Steel F11 Weld Neck Flanges
Alloy Steel F11 Weld Neck Flanges
F11 Chrome Moly Flanges
F11 Chrome Moly Flanges
ASTM A182 AS F11 Flanges
ASTM A182 AS F11 Flanges

Since molybdenum not only successfully lowers steel's creep rate but also helps to prevent the formation of coarse carbides and slow coagulation in high temperature applications. Furthermore, the a182 f11 material served as a crucial component in applications in industries including power generation and petrochemical facilities due to its compatibility for high temperatures and creep resistance.

Although it is a good idea to use molybdenum as an alloyant for flanges, doing so continuously and in greater amounts does not work because the element's creep ductility falls as its concentration rises. The alloy is susceptible to graphitization or the breakdown of iron carbides at temperatures higher than 500 °C, which limits the uses for these steels. Use of chromium and molybdenum provided a defence against both lower creep ductility and graphitization.

The mechanical qualities of a182 f11 are improved in a combination alloyed form so that the alloy can endure greater working temperatures and has added high tensile strength that is attributable to chromium. In addition, chromium addition produces remarkable oxidation. Additionally, it helps the steel resist corrosion more effectively. While molybdenum content ensures that the hardness is homogeneous in the alloy of the astm a182 f11 flange, chromium also offers good hardness penetration.

Specifications Of Alloy Steel F11 Flanges
Specifications ASTM A182 Alloy Steel F11 Flanges
ASME B16.5 Alloy Steel F11 Flanges size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Alloy Steel F11 Flanges Standards ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges, ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges,
Alloy Steel F11 Flanges Standard DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
Alloy Steel F11 Flanges Standard ANSI Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Alloy Steel F11 Flanges Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
Alloy Steel F11 Flanges Standard JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
Alloy Steel F11 Flanges Standard EN 6Bar 10Bar 16Bar 25Bar 40Bar
Main Types Forged / Threaded / Screwed / Plate
Flange supporting material Gasket, Ring Joint, Flange Bolts
Alloy Steel F11 Pipe Flanges Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production technique
  • Forged, Heat treated and machined
Connect Type/ Flange Face Type Small Male-Female (SMF), Small Tongue & Groove, Large Tongue & Groove,Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF)
Most common types of Alloy Steel F11 Flanges
  • Blind Ring Flange (BLRF), Alloy Steel F11 Flanges
  • Threaded Ring Flange, Alloy Steel F11 Flanges
  • Ring Type Joint Flange (RTJF), Alloy Steel F11 Flanges
  • Weld Neck Ring Flange (WNRF), Alloy Steel F11 Flanges
  • Lap Joint Ring Flange (LJRF), Alloy Steel F11 Flanges
  • Socket Weld Ring Flange (SWRF), Alloy Steel F11 Flanges
  • Slip-On Ring Flange (SORF), Alloy Steel F11 Flanges
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

Alloy Steel F11 Flanges Threaded Flanges, Socketweld Flanges, Slip-On Flanges, Blind Flanges, Weld Neck Flanges
Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Origin Indian / West Europe / Japan / USA / Korean
Equipment Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Specialized manufacturer of
  • DIN 2566 pn16
  • DIN 2566 en 1092 1
  • DIN 2566 pn10
  • Rtj Flanges
  • Pn16 Flanges
  • Alloy Steel F11 Weld Neck Flanges
  • Alloy Steel F11 Flanges
  • Alloy Steel F11 Slip-On Flanges
  • Alloy Steel F11 Socketweld Flanges
  • Alloy Steel F11 Plate Flanges
  • Alloy Steel F11 Large Diameter Flanges
  • Alloy Steel F11 Sorf Flanges
  • Alloy Steel F11 Blind Flanges
  • Alloy Steel F11 Table Flanges
  • Alloy Steel F11 Lap Joint Flanges
  • Alloy Steel F11 Loose Flanges
  • Alloy Steel F11 Orifice Flanges
  • Alloy Steel F11 AS 4087 Water Flanges
Alloy Steel F11 Flanges Standard

ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange, ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE,
BS Flange, EN Flange, API 6A Flange etc

  • B.S: BS4504 , BS3293, BS1560, BS10
  • AS 2129: Table D; Table E; Table H
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • American standard (ANSI)
  • German (DIN)
  • British standard (BS)
  • Any other specilised flanges
  • DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
  • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
Key markets and industries for Alloy Steel F11 Flanges
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
  • Bitumen upgraders.
  • Heavy oil refineries.
Export to Thailand, Peru, Iran, Korea, Singapore, Ireland, Oman, Dubai, Ukraine, Brazil, India, Canada, Egypt, Indonesia, USA, Spain, Saudi Arabia, etc
Alloy Steel F11 Flanges Application
  • To Connect Pipe & Tubes in Gas,Construction Metallurgy, Petroleum, Shipbuilding, Power, Chemical etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

 

Types Of Alloy Steel F11 Flange
ASME SA182 F11 Slip On Flanges (SORF)
ASME SA182 F11 Slip On Flanges (SORF)
Alloy F11 Socket Weld Flanges (SWRF)
Alloy F11 Socket Weld Flanges (SWRF)
ASME SA182 F11 Blind Flanges (BLRF)
ASME SA182 F11 Blind Flanges (BLRF)
Alloy F11 Weld Neck Flanges (WNRF)
Alloy F11 Weld Neck Flanges (WNRF)
A182 AS F11 Threaded / Screwed Flanges
A182 AS F11 Threaded / Screwed Flanges
ASME SA182 F11 Lap Joint Flanges
ASME SA182 F11 Lap Joint Flanges
AS F11 Long Weld Neck Flanges
AS F11 Long Weld Neck Flanges
A182 Alloy Steel F11 Spectacle Blind Flanges
A182 Alloy Steel F11 Spectacle Blind Flanges
Alloy F11 Raised Face Flanges
Alloy F11 Raised Face Flanges
Alloy F11 Male & Female Flanges
Alloy F11 Male & Female Flanges
A182 AS F11 Weldoflange
A182 AS F11 Weldoflange
A182 AS F11 Puddle Flanges
A182 AS F11 Puddle Flanges
ASME SA182 AS F11 Ring Spacer
ASME SA182 AS F11 Ring Spacer
Alloy F11 High Hub Blind Flanges
Alloy F11 High Hub Blind Flanges
F11 Alloy Steel Forged Flanges
F11 Alloy Steel Forged Flanges
ASTM A182 F11 Bleed Ring Flange
ASTM A182 F11 Bleed Ring Flange
ASME SA182 F11 Orifice Flanges
ASME SA182 F11 Orifice Flanges
AS F11 Square Flanges
AS F11 Square Flanges
F11 Alloy Steel Nipo flange
F11 Alloy Steel Nipo flange
A182 AS F11 Spade Flange
ASTM A182 AS F11 Spade Flange
ASTM A182 F11 Plate Flanges
ASTM A182 F11 Plate Flanges
AS F11 Ring Type Joint Flanges (RTJ)
AS F11 Ring Type Joint Flanges (RTJ)
ASTM A182 F11 Tongue & Groove Flanges
ASTM A182 F11 Tongue & Groove Flanges
Alloy F11 Reducing Flanges
Alloy F11 Reducing Flanges

 

Alloy Steel F11 Flange Dimensions
Click on below links for Alloy Steel F11 Flanges dimensions

 

Alloy Steel F11 Pipe Flange Dimensions
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
  • ASME B1.20.1, Pipe Threads, General Purpose
  • ASME B16.1, Cast Iron Flanges and Flanged Fittings Classes 25, 125 and 250
  • ASME B16.5, Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24
  • ASME B16.11, Forged Fittings, Socket Welding and Threaded
  • ASME B16.25, Buttwelding Ends
  • ASME B16.36, Orifice Flanges
  • ASME B16.47, Large Diameter Steel Flanges NPS 26 Through NPS 60
  • ASME B31.1, Power Piping
  • ASME B31.3, Process Piping
  • ASME B46.1, Surface Texture (Surface Roughness, Waviness, and Lay)

 

Weight Chart Of Alloy Steel F11 Flanges

15mm (1/2") Alloy Steel F11 Flanges Weight Chart

Pipe Normal Diam.
O.D. Flange
Thk. Of Flange Min
Diam.
of
Hub
Diameter of Raised Face
Length Hub.Y
Thread Length
Diam.
of Bolt
Circle
Diam.
of Bolt
Holes
Number
of Bolts
Diam. of
Bolts
(inch)
KG
LB
inch
dn
O
C
X
G
Y
T
BC
BH
BN
BD
1/2"
15
89.00
11.20
30.20
35.10
15.70
15.70
60.50
15.80
4
1/2"
0.4
0.9
3/4"
20
98.50
12.70
38.10
42.90
15.70
15.70
69.90
15.80
4
1/2"
0.7
1.5
1"
25
108.00
14.20
49.30
50.80
17.50
17.50
79.30
15.80
4
1/2"
0.8
1.8
1-1/4"
32
117.50
15.70
58.70
63.50
20.60
20.60
88.90
15.80
4
1/2"
1.2
2.6
1-1/2"
40
127.00
17.50
65.00
73.20
22.40
22.40
98.60
15.80
4
1/2"
1.5
3.3
2"
50
152.50
19.10
77.70
91.90
25.40
25.40
120.70
19.10
4
5/8"
2.3
5.1
2-1/2"
65
178.00
22.40
90.40
104.60
28.40
28.40
139.70
19.10
4
5/8"
3.7
8.1
3"
80
190.50
23.90
108.00
127.00
30.20
30.20
152.40
19.10
4
5/8"
4.1
9
3-1/2"
90
216.00
23.90
122.20
139.70
31.80
31.80
177.80
19.10
8
5/8"
5.1
11.2
4"
100
228.50
23.90
134.90
157.20
33.30
33.30
190.50
19.10
8
5/8"
5.9
13
5"
125
254.00
23.90
163.60
185.70
36.60
36.60
215.90
22.40
8
3/4"
7
15.4
6"
150
279.50
25.40
192.00
215.90
39.60
39.60
241.30
22.40
8
3/4"
8.4
18.5
8"
200
343.00
28.40
246.10
269.70
44.50
44.50
298.50
22.40
8
3/4"
13
28.6
10"
250
406.50
30.20
304.80
323.90
49.30
49.30
362.00
25.40
12
7/8"
18
39.5
12"
300
482.50
31.80
365.30
381.00
55.60
55.60
431.80
25.40
12
7/8"
29
64
14"
350
533.50
35.10
400.10
412.80
57.20
57.20
476.30
28.50
12
1"
39
86
16"
400
597.00
36.60
457.20
469.90
63.50
63.50
539.80
28.50
16
1"
47
103
18"
450
635.00
39.60
505.00
533.40
68.30
68.30
577.90
31.80
16
1 1/8"
57
126
20"
500
698.50
42.90
558.80
584.20
73.20
73.20
635.00
31.80
20
1 1/8"
76
167
24"
600
813.00
47.80
663.40
692.20
82.60
82.60
749.30
35.10
20
1 1/4"
97
214

 

Alloy Steel F11 Industrial Flanges, ASTM A182 F11 Alloy Steel EN 1092-1 Flanges Traders in India
Pressure Ratings Of AS F11 Pipe Flange

Alloy Steel F11 Flange Standards / Types and Pressure Class :

ASME/ANSI B 16.36 Welding Neck Flange, Slip on Flange, Threaded Flange
PRESSURE CLASS 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.5 Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47 Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS 75, 150, 300, 400, 600, 900
BS 4504 SEC 3.1 Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 40
BS 4504[PART 1] Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 400
BS 1560 BOSS Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
BS10 Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE D, E, F, H
DIN FLANGES DIN 2527, 2566, 2573, 2576, 2641, 2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637, 2638, 2673
PRESSURE CLASS PN 6 TO PN 100

 

ASTM A182 F11 Flanges Standard Material
Click On Below Links For Astm A182 F11 Flanges Standard

 

Chemical Composition Of Alloy Steel F11 Flanges
Grade C Mn Si P S Cr Mo
Alloy Steel F11 0.5-0.15  0.3-0.6 0.5-1.0  0.03 0.03 1.0-1.5 0.44-0.65

 

Alloy Steel F11 Forged and Plate Flanges
Alloy Steel F11 Flanges
Alloy Steel F11 Blind Flanges
Alloy Steel F11 Reducing Flanges
Alloy Steel F11 Slip-On Flanges
Alloy Steel F11 Flanges
Alloy Steel F11 Orifice Flanges
Alloy Steel F11 Forged Flanges
Alloy Steel F11 Lap Joint Flanges
Alloy Steel F11 Plate Flanges
Alloy Steel F11 Weld Neck Flanges
Alloy Steel F11 Socket Weld Flanges

 

Alloy Steel F11 Flanges Available Types
F11 Alloy Steel SORF Flanges
Alloy Steel A182 F11 BLRF Flanges
F11 Alloy Steel SAE Flanges
ASME SA182 F11 Reducing Flanges Wholesaler
Alloy Steel F11 Flanges Manufacturer
ASTM A182 Alloy Steel F11 Exhaust Flanges
AS F11 Screwed Flanges Exporter
ASME SA182 Alloy Steel F11 Tank Flanges
Alloy Steel A182 F11 Puddle Flanges
Alloy F11 Split Flanges Stockist
A182 F11 Alloy Steel RTJ Flanges
F11 Alloy Steel Flanges WNRF Flanges Supplier
Chrome Moly Alloy Steel F11 DIN Flanges
ASTM A182 F11 Alloy Steel Nipoflange
A182 Alloy Steel F11 Square Flanges
ASME SA182M Alloy Steel F11 SWRF Flange
Steel F11 Tongue & Groove Flanges
Chrome Moly Alloy Steel F11 Male & Female Flanges
Alloy Steel F11 Raised Face Flanges
Alloy Steel F11 ASME B16.5 Flanges
Alloy F11 Flanges
F11 Alloy Steel Flanges EN 1092-1 Flanges
Alloy Steel F11 Forged Flanges
Alloy Steel F11 EN 1092-1 Flanges
Alloy Steel F11 Flat Flange
Alloy Steel F11 Slip on Flanges
Alloy Steel ASTM A182 F11 Reducing Flanges
Alloy Steel F11 Long Weld Neck Flanges
Alloy Steel A182 F11 Orifice Flange
Alloy Steel 5Cr-1/2Mo Spectacle Blind Flanges
Alloy Steel F11 BS 4504 Flanges
Alloy Steel F11 Flanges
ASME SA182 F11 Alloy Steel F11 BLRF Flange
Alloy ASTM A182 F11 SORF Flanges
ASTM A182 Alloy Steel F11 Lap Joint Flanges
Chrome Moly Alloy Steel F11 WNRF Flange
Alloy Steel F11 Weld Neck Flanges
Alloy Steel F11 Socket weld Flanges
Alloy Steel F11 Ring Type Joint Flanges
Steel ASTM A182 F11 Threaded Flanges
Alloy Steel A182 F11 Flanges
ANSI F11 Alloy Steel Blind Flange
ANSI B16.5 Alloy Steel F11 RTJ Flanges
Alloy Steel F11 Screwed Flanges

 

ASME Sa182 F11 Reducing Flanges, Alloy Steel Grade F11 threaded flange, buy Alloy Steel A182 F11 Socket Weld Flange, ASTM A182 F11 WNRF Flange at affordable price

Mechanical Properties Of Alloy Steel F11 Flanges
Tensile Strength Yield Strength (0.2%Offset) Elongation
205 415 20 %

 

Check Sizes In Stock
Flange Schedule/Class
Pipe Size - Pipe Flanges
Flange Connection Type
Flange Material
Max. Pressure
ASME B16.5 Class 150
1/2"
FNPT
Alloy Steel F11 Flanges
150 psi
ASME B16.5 Class 150
1/2"
Socket Weld
Alloy Steel F11 Flanges
275 psi
ASME B16.5 Class 150
1/2"
Welded
Alloy Steel F11 Flanges
150 psi
ASME B16.5 Class 150
3/4"
FNPT
Alloy Steel F11 Flanges
150 psi
ASME B16.5 Class 150
3/4"
Socket Weld
Alloy Steel F11 Flanges
275 psi
ASME B16.5 Class 150
1-1/4"
Socket Weld
Alloy Steel F11 Flanges
275 psi
ASME B16.5 Class 150
1-1/2"
Socket Weld
Alloy Steel F11 Flanges
275 psi
ASME B16.5 Class 150
2"
FNPT
Alloy Steel F11 Flanges
150 psi
ASME B16.5 Class 150
2"
Socket Weld
Alloy Steel F11 Flanges
275 psi
ASME B16.5 Class 150
2-1/2"
Socket Weld
Alloy Steel F11 Flanges
275 psi
ASME B16.5 Class 150
3"
Socket Weld
Alloy Steel F11 Flanges
275 psi
ASME B16.5 Class 150
4"
FNPT
Alloy Steel F11 Flanges
150 psi
ASME B16.5 Class 150
4"
Socket Weld
Alloy Steel F11 Flanges
275 psi
ASME B16.5 Class 300
1/2"
Slip On
Alloy Steel F11 Flanges
720 psi
ASME B16.5 Class 300
1/2"
Slip On
Alloy Steel F11 Flanges
720 psi
ASME B16.5 Class 300
1"
Slip On
Alloy Steel F11 Flanges
720 psi
ASME B16.5 Class 300
1"
Slip On
Alloy Steel F11 Flanges
720 psi
ASME B16.5 Class 300
1-1/4"
FNPT
Alloy Steel F11 Flanges
720 psi
ASME B16.5 Class 300
1-1/4"
Slip On
Alloy Steel F11 Flanges
720 psi
ASME B16.5 Class 300
1-1/2"
Slip On
Alloy Steel F11 Flanges
720 psi
ASME B16.5 Class 300
1-1/2"
Slip On
Alloy Steel F11 Flanges
720 psi
ASME B16.5 Class 300
2"
Slip On
Alloy Steel F11 Flanges
720 psi
ASME B16.5 Class 300
2"
Slip On
Alloy Steel F11 Flanges
720 psi
ASME B16.5 Class 300
2-1/2"
Slip On
Alloy Steel F11 Flanges
720 psi
ASME B16.5 Class 300
2-1/2"
Slip On
Alloy Steel F11 Flanges
720 psi
ASME B16.5 Class 300
3"
Slip On
Alloy Steel F11 Flanges
720 psi
ASME B16.5 Class 300
3"
Slip On
Alloy Steel F11 Flanges
720 psi
ASME B16.5 Class 300
4"
Slip On
Alloy Steel F11 Flanges
720 psi
ASME B16.5 Class 300
4"
Slip On
Alloy Steel F11 Flanges
720 psi

 

Alloy Steel F11 AISI, ASME, DIN, BS, EN Flanges Application
  •  ASME Alloy Steel F11 Flanges uses in Bellows
  •  ASTM A182 F11 Alloy Steel Flanges uses in Aircraft exhaust
  •  Alloy Steel F11 Flanges uses in Heat Exchangers
  •  F11 Alloy Steel Flanges uses in Woven or welded screens for high temperature mineral processing
  •  A182 AS F11 Blind Flanges uses in Spiral Welded tube for burner pipes and flues
  •  ASTM A182 F11 Alloy Steel Flanges uses in Furnace parts
  •  SA182 AS F11 Flanges uses in Expansion joints
  •  ASTM A182 F11 Flanges uses in Heating element tubing

 

AS F11 DIN 1.7335 Flanges, ASTM A182 F11 Alloy Steel Flanges at Best Price

 

flange