Alloy Steel F22 Flanges Manufacturers
Low alloy steel grade alloy steel f22 slip on flanges have a nominal chromium content of 2.25 percent. This steel grade alloy flanges are frequently used in oil patch wellhead applications as connections, hangers, and block valves. In the NACE MR0175, hardness levels up to 22 HRC are authorised. The base metal for clad components is frequently low alloy steel grade f22.
Table of Content
- Specifications Of Alloy Steel F22 Flanges
- Types Of Grade F22 Alloy Steel Flanges
- Pressure Ratings Of Alloy Steel F22 Flange
- Alloy Steel F22 Flanges Weight Chart
- ASTM A182 AS F22 Flanges Standard
- Alloy Steel F22 Flange Price List
- A182 F22 Alloy Steel Flange Dimensions
- Mechanical Properties Of Alloy Steel F22 Flanges
- Chemical Composition of Grade F22 Alloy Steel Pipe Flanges
- Application of Alloy Steel F22 Flanges
- ASTM A182 F22 Alloy Steel Flanges Available Types
check Astm A182 Gr F22 Class 3 flange Cost,CrMo F22 Pipe Flanges, Chromium Molybdenum Steel F22 Flanges, Alloy Steel F22 Slip On Flange at affordable price
The elongation of the alloy steel f22 flanges is 18%, and its ultimate tensile strength is a minimum of about 95 KSI when the astm a182 f22 flange is delivered or supplied in a Normalized, Hardened, and Tempered Condition, where the 0.2% Proof Stress is a minimum of about 75 KSI.
A few of the crucial characteristics of alloy steel f22 flanges are their enhanced corrosion resistance, accurate measurements, and rust-proof finish. The astm a182 f22 blind flange is utilised in a variety of industries because it can bear loads of high pressure and high temperature. The astm a182 f22 class 3 equivalent, for example, is used by purchasers from a variety of industry sectors, including basic industries like sugar, dairy, paper, textile, and engineering and more complicated ones like petrochemical, chemical & fertiliser, oil & gas, power generation, and nuclear industries.
Suppliers of Sa182 F22 Threaded Flange, Stockholder Of Alloy Steel F22 RTJ Flange, A182 F22 Flange
ASTM A182 F22 Alloy Steel Flanges
ASME SA182 AS F22 Flanges
F22 Chrome Moly Flanges
The a182 f22 slip on flange's seamless transition from flange thickness to pipe is another advantage. Additionally, the asme sa 182 f22 provides for a very good stress distribution. Compared to both stainless steel and carbon steel flange, forged alloy steel f22 flange tends to offer a strong edge in terms of performance. Although the forged a182 f22 threaded flange is more effective than the other two, it is more expensive than carbon steel flanges, which makes it difficult to employ them in those kinds of specialised environments. The astm a182 f22 class 2 is praised for being durable while still delivering reliable performance.
The alloy steel flanges made from astm a182 f22 have good mechanical and physical qualities and a long service life. The a182 f22 flange is utilised as a type of device that can be used to connect pipes, valves, pumps, and other types of piping systems in terms of applications.
Molybdenum and chromium are typically found in the chemical composition of the astm a182 f22 forged flange. The improved performance of these flanges is a result of these two factors. Because chrome moly steel has a superior weight-to-strength ratio than stainless steel, designers can shrink the astm a182 f2 2 class 3 flange's walls without sacrificing quality. This reduces the flange's weight and cost.
| Specifications | ASTM A182 Alloy Steel F22 Flanges |
|---|---|
| ASME B16.5 Alloy Steel F22 Flanges size range | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
| Alloy Steel F22 Flanges Standards | ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges, ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, |
| Alloy Steel F22 Flanges Standard DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| Alloy Steel F22 Flanges Standard ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| Alloy Steel F22 Flanges Standard UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Alloy Steel F22 Flanges Standard JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
| Alloy Steel F22 Flanges Standard EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Main Types | Forged / Threaded / Screwed / Plate |
| Flange supporting material | Gasket, Ring Joint, Flange Bolts |
| Alloy Steel F22 Pipe Flanges Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Production technique |
|
| Connect Type/ Flange Face Type | Small Male-Female (SMF), Small Tongue & Groove, Large Tongue & Groove,Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF) |
| Most common types of Alloy Steel F22 Flanges |
|
| Special design | As per your drawing AS, ANSI, BS, DIN and JIS Alloy Steel F22 Flanges Threaded Flanges, Socketweld Flanges, Slip-On Flanges, Blind Flanges, Weld Neck Flanges |
| Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
| Origin | Indian / West Europe / Japan / USA / Korean |
| Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
| Specialized manufacturer of |
|
| Alloy Steel F22 Flanges Standard | ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange, ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE,
|
| Key markets and industries for Alloy Steel F22 Flanges |
|
| Export to | India, Spain, Oman, Iran, Peru, Singapore, Korea, Dubai, USA, Brazil, Egypt, Ireland, Ukraine, Thailand, Indonesia, Canada, Saudi Arabia, etc |
| Alloy Steel F22 Flanges Application |
|
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Alloy Steel F22 Forged and Plate Flanges
Alloy Steel F22 Flanges |
|
Alloy Steel F22 Blind Flanges |
Alloy Steel F22 Reducing Flanges |
Alloy Steel F22 Lap Joint Flanges |
Alloy Steel F22 Plate Flanges |
Alloy Steel F22 Orifice Flanges |
Alloy Steel F22 Forged Flanges |
Alloy Steel F22 Slip-On Flanges |
Alloy Steel F22 Flanges |
Alloy Steel F22 Weld Neck Flanges |
Alloy Steel F22 Socket Weld Flanges |
Alloy Steel F22 Ring Type Joint Flanges |
|
Alloy Steel F22 Flange Standards / Types and Pressure Class :
| ASME/ANSI B 16.36 | Welding Neck Flange, Slip on Flange, Threaded Flange |
| PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B 16.5 | Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B 16.47 | Welding Neck Flange, Blind Flange [Series A & B] |
| PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
| BS 4504 SEC 3.1 | Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange |
| PRESSURE CLASS | PN 2.5 TO PN 40 |
| BS 4504[PART 1] | Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange |
| PRESSURE CLASS | PN 2.5 TO PN 400 |
| BS 1560 BOSS | Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| BS10 | Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange |
| TABLE | D, E, F, H |
| DIN FLANGES | DIN 2527, 2566, 2573, 2576, 2641, 2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637, 2638, 2673 |
| PRESSURE CLASS | PN 6 TO PN 100 |
Special Price On
Flange Schedule/Class |
Pipe Size - Pipe Flanges |
Flange Connection Type |
Flange Material |
Max. Pressure |
|---|---|---|---|---|
ASME B16.5 Class 150 |
1/2" |
FNPT |
Alloy Steel F22 Flanges |
150 psi |
ASME B16.5 Class 150 |
1/2" |
Socket Weld |
Alloy Steel F22 Flanges |
275 psi |
ASME B16.5 Class 150 |
1/2" |
Welded |
Alloy Steel F22 Flanges |
150 psi |
ASME B16.5 Class 150 |
3/4" |
FNPT |
Alloy Steel F22 Flanges |
150 psi |
ASME B16.5 Class 150 |
3/4" |
Socket Weld |
Alloy Steel F22 Flanges |
275 psi |
ASME B16.5 Class 150 |
1-1/4" |
Socket Weld |
Alloy Steel F22 Flanges |
275 psi |
ASME B16.5 Class 150 |
1-1/2" |
Socket Weld |
Alloy Steel F22 Flanges |
275 psi |
ASME B16.5 Class 150 |
2" |
FNPT |
Alloy Steel F22 Flanges |
150 psi |
ASME B16.5 Class 150 |
2" |
Socket Weld |
Alloy Steel F22 Flanges |
275 psi |
ASME B16.5 Class 150 |
2-1/2" |
Socket Weld |
Alloy Steel F22 Flanges |
275 psi |
ASME B16.5 Class 150 |
3" |
Socket Weld |
Alloy Steel F22 Flanges |
275 psi |
ASME B16.5 Class 150 |
4" |
FNPT |
Alloy Steel F22 Flanges |
150 psi |
ASME B16.5 Class 150 |
4" |
Socket Weld |
Alloy Steel F22 Flanges |
275 psi |
ASME B16.5 Class 300 |
1/2" |
Slip On |
Alloy Steel F22 Flanges |
720 psi |
ASME B16.5 Class 300 |
1/2" |
Slip On |
Alloy Steel F22 Flanges |
720 psi |
ASME B16.5 Class 300 |
1" |
Slip On |
Alloy Steel F22 Flanges |
720 psi |
ASME B16.5 Class 300 |
1" |
Slip On |
Alloy Steel F22 Flanges |
720 psi |
ASME B16.5 Class 300 |
1-1/4" |
FNPT |
Alloy Steel F22 Flanges |
720 psi |
ASME B16.5 Class 300 |
1-1/4" |
Slip On |
Alloy Steel F22 Flanges |
720 psi |
ASME B16.5 Class 300 |
1-1/2" |
Slip On |
Alloy Steel F22 Flanges |
720 psi |
ASME B16.5 Class 300 |
1-1/2" |
Slip On |
Alloy Steel F22 Flanges |
720 psi |
ASME B16.5 Class 300 |
2" |
Slip On |
Alloy Steel F22 Flanges |
720 psi |
ASME B16.5 Class 300 |
2" |
Slip On |
Alloy Steel F22 Flanges |
720 psi |
ASME B16.5 Class 300 |
2-1/2" |
Slip On |
Alloy Steel F22 Flanges |
720 psi |
ASME B16.5 Class 300 |
2-1/2" |
Slip On |
Alloy Steel F22 Flanges |
720 psi |
ASME B16.5 Class 300 |
3" |
Slip On |
Alloy Steel F22 Flanges |
720 psi |
ASME B16.5 Class 300 |
3" |
Slip On |
Alloy Steel F22 Flanges |
720 psi |
ASME B16.5 Class 300 |
4" |
Slip On |
Alloy Steel F22 Flanges |
720 psi |
ASME B16.5 Class 300 |
4" |
Slip On |
Alloy Steel F22 Flanges |
720 psi |
15mm (1/2") Alloy Steel F22 Flanges Weight Chart
Pipe Normal Diam. |
O.D. Flange |
Thk. Of Flange Min |
Diam. of Hub |
Diameter of Raised Face |
Length Hub.Y |
Thread Length |
Diam. of Bolt Circle |
Diam. of Bolt Holes |
Number of Bolts |
Diam. of Bolts (inch) |
KG |
LB |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
inch |
dn |
O |
C |
X |
G |
Y |
T |
BC |
BH |
BN |
BD |
||
1/2" |
15 |
89.00 |
11.20 |
30.20 |
35.10 |
15.70 |
15.70 |
60.50 |
15.80 |
4 |
1/2" |
0.4 |
0.9 |
3/4" |
20 |
98.50 |
12.70 |
38.10 |
42.90 |
15.70 |
15.70 |
69.90 |
15.80 |
4 |
1/2" |
0.7 |
1.5 |
1" |
25 |
108.00 |
14.20 |
49.30 |
50.80 |
17.50 |
17.50 |
79.30 |
15.80 |
4 |
1/2" |
0.8 |
1.8 |
1-1/4" |
32 |
117.50 |
15.70 |
58.70 |
63.50 |
20.60 |
20.60 |
88.90 |
15.80 |
4 |
1/2" |
1.2 |
2.6 |
1-1/2" |
40 |
127.00 |
17.50 |
65.00 |
73.20 |
22.40 |
22.40 |
98.60 |
15.80 |
4 |
1/2" |
1.5 |
3.3 |
2" |
50 |
152.50 |
19.10 |
77.70 |
91.90 |
25.40 |
25.40 |
120.70 |
19.10 |
4 |
5/8" |
2.3 |
5.1 |
2-1/2" |
65 |
178.00 |
22.40 |
90.40 |
104.60 |
28.40 |
28.40 |
139.70 |
19.10 |
4 |
5/8" |
3.7 |
8.1 |
3" |
80 |
190.50 |
23.90 |
108.00 |
127.00 |
30.20 |
30.20 |
152.40 |
19.10 |
4 |
5/8" |
4.1 |
9 |
3-1/2" |
90 |
216.00 |
23.90 |
122.20 |
139.70 |
31.80 |
31.80 |
177.80 |
19.10 |
8 |
5/8" |
5.1 |
11.2 |
4" |
100 |
228.50 |
23.90 |
134.90 |
157.20 |
33.30 |
33.30 |
190.50 |
19.10 |
8 |
5/8" |
5.9 |
13 |
5" |
125 |
254.00 |
23.90 |
163.60 |
185.70 |
36.60 |
36.60 |
215.90 |
22.40 |
8 |
3/4" |
7 |
15.4 |
6" |
150 |
279.50 |
25.40 |
192.00 |
215.90 |
39.60 |
39.60 |
241.30 |
22.40 |
8 |
3/4" |
8.4 |
18.5 |
8" |
200 |
343.00 |
28.40 |
246.10 |
269.70 |
44.50 |
44.50 |
298.50 |
22.40 |
8 |
3/4" |
13 |
28.6 |
10" |
250 |
406.50 |
30.20 |
304.80 |
323.90 |
49.30 |
49.30 |
362.00 |
25.40 |
12 |
7/8" |
18 |
39.5 |
12" |
300 |
482.50 |
31.80 |
365.30 |
381.00 |
55.60 |
55.60 |
431.80 |
25.40 |
12 |
7/8" |
29 |
64 |
14" |
350 |
533.50 |
35.10 |
400.10 |
412.80 |
57.20 |
57.20 |
476.30 |
28.50 |
12 |
1" |
39 |
86 |
16" |
400 |
597.00 |
36.60 |
457.20 |
469.90 |
63.50 |
63.50 |
539.80 |
28.50 |
16 |
1" |
47 |
103 |
18" |
450 |
635.00 |
39.60 |
505.00 |
533.40 |
68.30 |
68.30 |
577.90 |
31.80 |
16 |
1 1/8" |
57 |
126 |
20" |
500 |
698.50 |
42.90 |
558.80 |
584.20 |
73.20 |
73.20 |
635.00 |
31.80 |
20 |
1 1/8" |
76 |
167 |
24" |
600 |
813.00 |
47.80 |
663.40 |
692.20 |
82.60 |
82.60 |
749.30 |
35.10 |
20 |
1 1/4" |
97 |
214 |
ASTM A182 F22 Alloy Steel Flange Supplier in Mumbai, Check Astm A182 F22 Cl3 Flange Price List ASTM A182 Alloy Steel F22 SWRF Flanges
Click On Below Links For Astm A182 F22 Flanges Standard
- ISO Flanges
- MSS SP-44 Flange
- API Flanges
- Australian Flanges
- GOST 12820 80 Flanges
- BS 10 Flanges
- EN 1092-1 Flange
- JIS B2220 Flange
- AWWA C207 Flanges
- SABS / SANS 1123 Flanges
- Korean FLANGE
- BS 4504 Flanges
Click on below links for Alloy Steel F22 Flanges dimensions
- 150 LB Flange Dimensions
- 300 LB Flange Dimensions
- 600 LB Flange Dimensions
- 900 LB Flange Dimensions
- 1500 LB Flange Dimensions
- 2500 LB Flange Dimensions
- DIN 2527 Flanges
- DIN 2573 Flanges
- DIN 2576 Flanges
- DIN 2632 Flanges
- DIN 2633 Flanges
- DIN 2635 Flanges
- DIN 2642 Flanges
- ANSI B16.47 Flange
Alloy Steel F22 Pipe Flange Dimensions
| AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) |
|
|---|
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
380 |
585 |
20 % |
Grade |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Alloy Steel F22 |
0.15 max |
0.3-0.6 |
0.5-1.0 |
0.03 |
0.03 |
8-10 |
0.9-1.1 |
- ASME Alloy Steel F22 Flanges uses in Bellows
- ASTM A182 F22 Flanges uses in Heating element tubing
- F22 Alloy Steel Flanges uses in Woven or welded screens for high temperature mineral processing
- ASTM A182 F22 Alloy Steel Flanges uses in Furnace parts
- Alloy Steel F22 Flanges uses in Heat Exchangers
- ASTM A182 F22 Alloy Steel Flanges uses in Aircraft exhaust fastenersonline
- A182 AS F22 Blind Flanges uses in Spiral Welded tube for burner pipes and flues
- SA182 AS F22 Flanges uses in Expansion joints
F22 Alloy Steel SORF Flanges |
Alloy Steel A182 F22 BLRF Flanges |
Alloy Steel A182 F22 Puddle Flanges |
Alloy F22 Split Flanges Stockist |
F22 Alloy Steel SAE Flanges |
ASME SA182 F22 Reducing Flanges Wholesaler |
Alloy Steel F22 Flanges Manufacturer |
ASTM A182 Alloy Steel F22 Exhaust Flanges |
AS F22 Screwed Flanges Exporter |
ASME SA182 Alloy Steel F22 Tank Flanges |
A182 F22 Alloy Steel RTJ Flanges |
F22 Alloy Steel Flanges WNRF Flanges Supplier |
Alloy F22 Flanges |
F22 Alloy Steel Flanges EN 1092-1 Flanges |
Alloy Steel F22 Forged Flanges |
Alloy Steel F22 EN 1092-1 Flanges |
Alloy Steel F22 BS 4504 Flanges |
Alloy Steel F22 Flanges |
Alloy Steel F22 Flat Flange |
Alloy Steel F22 Slip on Flanges |
Alloy Steel ASTM A182 F22 Reducing Flanges |
Alloy Steel F22 Long Weld Neck Flanges |
Alloy Steel A182 F22 Orifice Flange |
Alloy Steel 5Cr-1/2Mo Spectacle Blind Flanges |
Alloy Steel A182 F22 Flanges |
ANSI F22 Alloy Steel Blind Flange |
Alloy Steel F22 Weld Neck Flanges |
Alloy Steel F22 Socket weld Flanges |
Alloy Steel F22 Ring Type Joint Flanges |
Steel ASTM A182 F22 Threaded Flanges |
ASME SA182 F22 Alloy Steel F22 BLRF Flange |
Alloy ASTM A182 F22 SORF Flanges |
Chrome Moly Alloy Steel F22 DIN Flanges |
ASTM A182 F22 Alloy Steel Nipoflange |
Alloy Steel F22 Raised Face Flanges |
Alloy Steel F22 ASME B16.5 Flanges |
ANSI B16.5 Alloy Steel F22 RTJ Flanges |
Alloy Steel F22 Screwed Flanges |
ASTM A182 Alloy Steel F22 Lap Joint Flanges |
Chrome Moly Alloy Steel F22 WNRF Flange |
A182 Alloy Steel F22 Square Flanges |
ASME SA182M Alloy Steel F22 SWRF Flange |
Steel F22 Tongue & Groove Flanges |
Chrome Moly Alloy Steel F22 Male & Female Flanges |
